[PATCH 0/2] Conclusive KSTR-SAMA5D27 support

[Artur Rojek]

Hi all,

this series adds support for Conclusive KSTR-SAMA5D27, a Microchip
SAMA5D27 SoC based Single Board Computer by Conclusive Engineering.

Patch [1/2] adds a missing prototype for populate_serial_number(), which
is used by KSTR-SAMA5D27 in order to read its serial number embedded in
EEPROM TLV.

Patch [2/2] introduces KSTR-SAMA5D27 support, including board init,
Device Tree and defconfig files. An appropriate MAINTAINERS entry is
also provided. A new board/conclusive subdirectory is added in
anticipation of future support of our other products.

Note that the "if (IS_ENABLED(CONFIG...))" checkpatch warnings for this
patch are considered by me as false positives.

Artur Rojek (2):
  common: add prototype for populate_serial_number()
  board: Add support for Conclusive KSTR-SAMA5D27

 arch/arm/dts/Makefile                         |   3 +
 arch/arm/dts/at91-kstr-sama5d27.dts           | 310 ++++++++++++++++++
 arch/arm/mach-at91/Kconfig                    |  13 +
 board/conclusive/kstr-sama5d27/Kconfig        |  15 +
 board/conclusive/kstr-sama5d27/MAINTAINERS    |   8 +
 board/conclusive/kstr-sama5d27/Makefile       |   5 +
 .../conclusive/kstr-sama5d27/kstr-sama5d27.c  | 235 +++++++++++++
 configs/kstr_sama5d27_defconfig               |  79 +++++
 include/configs/kstr-sama5d27.h               |  15 +
 include/init.h                                |   1 +
 10 files changed, 684 insertions(+)
 create mode 100644 arch/arm/dts/at91-kstr-sama5d27.dts
 create mode 100644 board/conclusive/kstr-sama5d27/Kconfig
 create mode 100644 board/conclusive/kstr-sama5d27/MAINTAINERS
 create mode 100644 board/conclusive/kstr-sama5d27/Makefile
 create mode 100644 board/conclusive/kstr-sama5d27/kstr-sama5d27.c
 create mode 100644 configs/kstr_sama5d27_defconfig
 create mode 100644 include/configs/kstr-sama5d27.h

-- 
2.42.0