[PATCH v2 4/4] kontron_sl28: Use u-boot-update.bin instead of u-boot.update

[Simon Glass]

A '.update' extension does not get preserved by buildman, so change it.

Signed-off-by: Simon Glass <sjg at chromium.org>
Acked-by: Michael Walle <michael at walle.cc>
---

(no changes since v1)

 arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 2 +-
 doc/board/kontron/sl28.rst                        | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
index 83750ab001b2..aacf181e2dd0 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
@@ -64,7 +64,7 @@
 
 &binman {
 	u-boot-update {
-		filename = "u-boot.update";
+		filename = "u-boot-update.bin";
 
 		fit {
 			description = "FIT update image";
diff --git a/doc/board/kontron/sl28.rst b/doc/board/kontron/sl28.rst
index 44435d90c624..2cb8ec62be42 100644
--- a/doc/board/kontron/sl28.rst
+++ b/doc/board/kontron/sl28.rst
@@ -39,12 +39,12 @@ Update image
 ------------
 
 After the build finished, there will be an update image called
-u-boot.update. This can either be used in the DFU mode (which isn't
+u-boot-update.bin. This can either be used in the DFU mode (which isn't
 supported yet) or encapsulated in an EFI UpdateCapsule.
 
 To build the capsule use the following command
 
- $ tools/mkeficapsule -f u-boot.update -i 1 UpdateUboot
+ $ tools/mkeficapsule -f u-boot-update.bin -i 1 UpdateUboot
 
 Afterward you can copy this file to your ESP into the /EFI/UpdateCapsule/
 folder. On the next EFI boot this will automatically update your
-- 
2.42.0.283.g2d96d420d3-goog