[PATCH v3 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition
Apurva Nandan
a-nandan at ti.com
Thu Sep 28 12:05:21 CEST 2023
On 09/09/23 16:18, Roger Quadros wrote:
> Hi,
>
> On 08/09/2023 14:05, Apurva Nandan wrote:
>> Add j784s4 initialization files for initial SPL boot.
> Please be consistent in naming. J784S4 ?
>
>> Signed-off-by: Hari Nagalla <hnagalla at ti.com>
>> [ add firewall configurations and change the R5 MCU scratchpad ]
>> Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
>> Signed-off-by: Dasnavis Sabiya <sabiya.d at ti.com>
>> Signed-off-by: Apurva Nandan <a-nandan at ti.com>
>> ---
>> arch/arm/mach-k3/Kconfig | 16 +-
>> arch/arm/mach-k3/Makefile | 3 +
>> arch/arm/mach-k3/arm64-mmu.c | 52 +++
>> arch/arm/mach-k3/include/mach/hardware.h | 4 +
>> .../mach-k3/include/mach/j784s4_hardware.h | 60 ++++
>> arch/arm/mach-k3/include/mach/j784s4_spl.h | 46 +++
>> arch/arm/mach-k3/include/mach/spl.h | 6 +-
>> arch/arm/mach-k3/j784s4_fdt.c | 15 +
>> arch/arm/mach-k3/j784s4_init.c | 332 ++++++++++++++++++
>> 9 files changed, 526 insertions(+), 8 deletions(-)
>> create mode 100644 arch/arm/mach-k3/include/mach/j784s4_hardware.h
>> create mode 100644 arch/arm/mach-k3/include/mach/j784s4_spl.h
>> create mode 100644 arch/arm/mach-k3/j784s4_fdt.c
>> create mode 100644 arch/arm/mach-k3/j784s4_init.c
>>
>> diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
>> index 9168bf842d..0af2ec6ddb 100644
>> --- a/arch/arm/mach-k3/Kconfig
>> +++ b/arch/arm/mach-k3/Kconfig
>> @@ -22,6 +22,9 @@ config SOC_K3_AM625
>> config SOC_K3_AM62A7
>> bool "TI's K3 based AM62A7 SoC Family Support"
>>
>> +config SOC_K3_J784S4
>> + bool "TI's K3 based J784S4 SoC Family Support"
>> +
>> endchoice
>>
>> config SYS_SOC
>> @@ -30,7 +33,7 @@ config SYS_SOC
>> config SYS_K3_NON_SECURE_MSRAM_SIZE
>> hex
>> default 0x80000 if SOC_K3_AM654
>> - default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2
>> + default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
>> default 0x1c0000 if SOC_K3_AM642
>> default 0x3c000 if SOC_K3_AM625 || SOC_K3_AM62A7
>> help
>> @@ -42,7 +45,7 @@ config SYS_K3_NON_SECURE_MSRAM_SIZE
>> config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
>> hex
>> default 0x58000 if SOC_K3_AM654
>> - default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2
>> + default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
>> default 0x180000 if SOC_K3_AM642
>> default 0x38000 if SOC_K3_AM625 || SOC_K3_AM62A7
>> help
>> @@ -52,15 +55,14 @@ config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
>> config SYS_K3_MCU_SCRATCHPAD_BASE
>> hex
>> default 0x40280000 if SOC_K3_AM654
>> - default 0x41cff9fc if SOC_K3_J721S2
>> - default 0x41cff9fc if SOC_K3_J721E
>> + default 0x41cff9fc if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
>> help
>> Describes the base address of MCU Scratchpad RAM.
>>
>> config SYS_K3_MCU_SCRATCHPAD_SIZE
>> hex
>> default 0x200 if SOC_K3_AM654
>> - default 0x200 if SOC_K3_J721E || SOC_K3_J721S2
>> + default 0x200 if SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_J784S4
>> help
>> Describes the size of MCU Scratchpad RAM.
>>
>> @@ -68,7 +70,7 @@ config SYS_K3_BOOT_PARAM_TABLE_INDEX
>> hex
>> default 0x41c7fbfc if SOC_K3_AM654
>> default 0x41cffbfc if SOC_K3_J721E
>> - default 0x41cfdbfc if SOC_K3_J721S2
>> + default 0x41cfdbfc if SOC_K3_J721S2 || SOC_K3_J784S4
> Pleas move this to one line along with SOC_K3_J721E
Can't move to one line with J721E because the values are different for
J784S4 from J721E
>> default 0x701bebfc if SOC_K3_AM642
>> default 0x43c3f290 if SOC_K3_AM625
>> default 0x43c3f290 if SOC_K3_AM62A7 && CPU_V7R
>> @@ -172,7 +174,7 @@ config K3_ATF_LOAD_ADDR
>>
>> config K3_DM_FW
>> bool "Separate DM firmware image"
>> - depends on SPL && CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
>> + depends on SPL && CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2 || SOC_K3_AM625 || SOC_K3_AM62A7 || SOC_K3_J784S4) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
>> default y
>> help
>> Enabling this will indicate that the system has separate DM
>> diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
>> index fd77b8bbba..6fe36c265c 100644
>> --- a/arch/arm/mach-k3/Makefile
>> +++ b/arch/arm/mach-k3/Makefile
>> @@ -7,6 +7,7 @@ obj-$(CONFIG_SOC_K3_J721E) += j721e/ j7200/
>> obj-$(CONFIG_SOC_K3_J721S2) += j721s2/
>> obj-$(CONFIG_SOC_K3_AM625) += am62x/
>> obj-$(CONFIG_SOC_K3_AM62A7) += am62ax/
>> +obj-$(CONFIG_SOC_K3_J784S4) += j784s4/
>> obj-$(CONFIG_ARM64) += arm64-mmu.o
>> obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
>> obj-$(CONFIG_ARM64) += cache.o
>> @@ -16,6 +17,7 @@ obj-$(CONFIG_SOC_K3_AM654) += am654_fdt.o
>> obj-$(CONFIG_SOC_K3_J721E) += j721e_fdt.o
>> obj-$(CONFIG_SOC_K3_J721S2) += j721s2_fdt.o
>> obj-$(CONFIG_SOC_K3_AM625) += am625_fdt.o
>> +obj-$(CONFIG_SOC_K3_J784S4) += j784s4_fdt.o
>> endif
>> ifeq ($(CONFIG_SPL_BUILD),y)
>> obj-$(CONFIG_SOC_K3_AM654) += am654_init.o
>> @@ -24,6 +26,7 @@ obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o
>> obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
>> obj-$(CONFIG_SOC_K3_AM625) += am625_init.o
>> obj-$(CONFIG_SOC_K3_AM62A7) += am62a7_init.o
>> +obj-$(CONFIG_SOC_K3_J784S4) += j784s4_init.o
>> obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o
>> endif
>> obj-y += common.o security.o
>> diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c
>> index f8087d2421..c060920d7c 100644
>> --- a/arch/arm/mach-k3/arm64-mmu.c
>> +++ b/arch/arm/mach-k3/arm64-mmu.c
>> @@ -318,3 +318,55 @@ struct mm_region am64_mem_map[NR_MMU_REGIONS] = {
>>
>> struct mm_region *mem_map = am64_mem_map;
>> #endif /* CONFIG_SOC_K3_AM642 */
>> +
>> +#if defined(CONFIG_SOC_K3_J784S4)
>> +#define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 5)
>> +
>> +struct mm_region j784s4_mem_map[NR_MMU_REGIONS] = {
>> + {
>> + .virt = 0x0UL,
>> + .phys = 0x0UL,
>> + .size = 0x80000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
>> + PTE_BLOCK_NON_SHARE |
>> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
>> + }, {
>> + .virt = 0x80000000UL,
>> + .phys = 0x80000000UL,
>> + .size = 0x20000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
>> + PTE_BLOCK_INNER_SHARE
>> + }, {
>> + .virt = 0xa0000000UL,
>> + .phys = 0xa0000000UL,
>> + .size = 0x21000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
>> + PTE_BLOCK_NON_SHARE
>> + }, {
>> + .virt = 0xc1000000UL,
>> + .phys = 0xc1000000UL,
>> + .size = 0x3f000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
>> + PTE_BLOCK_INNER_SHARE
>> + }, {
>> + .virt = 0x880000000UL,
>> + .phys = 0x880000000UL,
>> + .size = 0x80000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
>> + PTE_BLOCK_INNER_SHARE
>> + }, {
>> + .virt = 0x500000000UL,
>> + .phys = 0x500000000UL,
>> + .size = 0x400000000UL,
>> + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
>> + PTE_BLOCK_NON_SHARE |
>> + PTE_BLOCK_PXN | PTE_BLOCK_UXN
>> + }, {
>> + /* List terminator */
>> + 0,
>> + }
>> +};
>> +
>> +struct mm_region *mem_map = j784s4_mem_map;
>> +
>> +#endif /* CONFIG_SOC_K3_J784S4 */
>> diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
>> index 65742c4b7c..03b18f6bad 100644
>> --- a/arch/arm/mach-k3/include/mach/hardware.h
>> +++ b/arch/arm/mach-k3/include/mach/hardware.h
>> @@ -33,6 +33,10 @@
>> #include "am62a_qos.h"
>> #endif
>>
>> +#ifdef CONFIG_SOC_K3_J784S4
>> +#include "j784s4_hardware.h"
>> +#endif
>> +
>> /* Assuming these addresses and definitions stay common across K3 devices */
>> #define CTRLMMR_WKUP_JTAG_ID (WKUP_CTRL_MMR0_BASE + 0x14)
>> #define JTAG_ID_VARIANT_SHIFT 28
>> diff --git a/arch/arm/mach-k3/include/mach/j784s4_hardware.h b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
>> new file mode 100644
>> index 0000000000..b5fd91c038
>> --- /dev/null
>> +++ b/arch/arm/mach-k3/include/mach/j784s4_hardware.h
>> @@ -0,0 +1,60 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * K3: J784S4 SoC definitions, structures etc.
>> + *
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
> 2023 here and elsewhere in this series.
>
>> + */
>> +#ifndef __ASM_ARCH_J784S4_HARDWARE_H
>> +#define __ASM_ARCH_J784S4_HARDWARE_H
>> +
>> +#include <config.h>
>> +#ifndef __ASSEMBLY__
>> +#include <linux/bitops.h>
>> +#endif
>> +
>> +#define WKUP_CTRL_MMR0_BASE 0x43000000
>> +#define MCU_CTRL_MMR0_BASE 0x40f00000
>> +#define CTRL_MMR0_BASE 0x00100000
>> +
>> +#define CTRLMMR_MAIN_DEVSTAT (CTRL_MMR0_BASE + 0x30)
>> +#define MAIN_DEVSTAT_BOOT_MODE_B_MASK BIT(0)
>> +#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT 0
>> +#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK GENMASK(3, 1)
>> +#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT 1
>> +#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK BIT(6)
>> +#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT 6
>> +#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK BIT(7)
>> +#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT 7
>> +
>> +#define CTRLMMR_WKUP_DEVSTAT (WKUP_CTRL_MMR0_BASE + 0x30)
>> +#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK GENMASK(5, 3)
>> +#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT 3
>> +#define WKUP_DEVSTAT_MCU_OMLY_MASK BIT(6)
>> +#define WKUP_DEVSTAT_MCU_ONLY_SHIFT 6
>> +
>> +/* ROM HANDOFF Structure location */
>> +#define ROM_EXTENDED_BOOT_DATA_INFO 0x41cfdb00
>> +
>> +/* MCU SCRATCHPAD usage */
>> +#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
>> +
>> +#if defined(CONFIG_SYS_K3_SPL_ATF) && !defined(__ASSEMBLY__)
>> +
>> +#define J784S4_DEV_MCU_RTI0 367
>> +#define J784S4_DEV_MCU_RTI1 368
>> +#define J784S4_DEV_MCU_ARMSS0_CPU0 346
>> +#define J784S4_DEV_MCU_ARMSS0_CPU1 347
>> +
>> +static const u32 put_device_ids[] = {
>> + J784S4_DEV_MCU_RTI0,
>> + J784S4_DEV_MCU_RTI1,
>> +};
>> +
>> +static const u32 put_core_ids[] = {
>> + J784S4_DEV_MCU_ARMSS0_CPU1,
>> + J784S4_DEV_MCU_ARMSS0_CPU0, /* Handle CPU0 after CPU1 */
>> +};
>> +
>> +#endif
>> +
>> +#endif /* __ASM_ARCH_J784S4_HARDWARE_H */
>> diff --git a/arch/arm/mach-k3/include/mach/j784s4_spl.h b/arch/arm/mach-k3/include/mach/j784s4_spl.h
>> new file mode 100644
>> index 0000000000..7f6293e628
>> --- /dev/null
>> +++ b/arch/arm/mach-k3/include/mach/j784s4_spl.h
>> @@ -0,0 +1,46 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
>> + * David Huang <d-huang at ti.com>
>> + */
>> +#ifndef _ASM_ARCH_J784S4_SPL_H_
>> +#define _ASM_ARCH_J784S4_SPL_H_
>> +
>> +/* With BootMode B = 0 */
>> +#include <linux/bitops.h>
> Please add blank line here.
>
>> +#define BOOT_DEVICE_HYPERFLASH 0x00
>> +#define BOOT_DEVICE_OSPI 0x01
>> +#define BOOT_DEVICE_QSPI 0x02
>> +#define BOOT_DEVICE_SPI 0x03
>> +#define BOOT_DEVICE_ETHERNET 0x04
>> +#define BOOT_DEVICE_I2C 0x06
>> +#define BOOT_DEVICE_UART 0x07
>> +#define BOOT_DEVICE_NOR BOOT_DEVICE_HYPERFLASH
>> +
>> +/* With BootMode B = 1 */
>> +#define BOOT_DEVICE_MMC2 0x10
>> +#define BOOT_DEVICE_MMC1 0x11
>> +#define BOOT_DEVICE_DFU 0x12
>> +#define BOOT_DEVICE_UFS 0x13
>> +#define BOOT_DEVIE_GPMC 0x14
>> +#define BOOT_DEVICE_PCIE 0x15
>> +#define BOOT_DEVICE_XSPI 0x16
>> +#define BOOT_DEVICE_RAM 0x17
>> +#define BOOT_DEVICE_MMC2_2 0xFF /* Invalid value */
>> +
>> +/* Backup boot modes with MCU Only = 0 */
>> +#define BACKUP_BOOT_DEVICE_RAM 0x0
>> +#define BACKUP_BOOT_DEVICE_USB 0x1
>> +#define BACKUP_BOOT_DEVICE_UART 0x3
>> +#define BACKUP_BOOT_DEVICE_ETHERNET 0x4
>> +#define BACKUP_BOOT_DEVICE_MMC2 0x5
>> +#define BACKUP_BOOT_DEVICE_SPI 0x6
>> +#define BACKUP_BOOT_DEVICE_I2C 0x7
>> +
>> +#define BOOT_MODE_B_SHIFT 4
>> +#define BOOT_MODE_B_MASK BIT(4)
>> +
>> +#define K3_PRIMARY_BOOTMODE 0x0
>> +#define K3_BACKUP_BOOTMODE 0x1
>> +
>> +#endif
>> diff --git a/arch/arm/mach-k3/include/mach/spl.h b/arch/arm/mach-k3/include/mach/spl.h
>> index 356cd89210..82f57347e6 100644
>> --- a/arch/arm/mach-k3/include/mach/spl.h
>> +++ b/arch/arm/mach-k3/include/mach/spl.h
>> @@ -1,6 +1,6 @@
>> /* SPDX-License-Identifier: GPL-2.0+ */
>> /*
>> - * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
>> * Lokesh Vutla <lokeshvutla at ti.com>
>> */
>> #ifndef _ASM_ARCH_SPL_H_
>> @@ -30,4 +30,8 @@
>> #include "am62a_spl.h"
>> #endif
>>
>> +#ifdef CONFIG_SOC_K3_J784S4
>> +#include "j784s4_spl.h"
>> +#endif
>> +
>> #endif /* _ASM_ARCH_SPL_H_ */
>> diff --git a/arch/arm/mach-k3/j784s4_fdt.c b/arch/arm/mach-k3/j784s4_fdt.c
>> new file mode 100644
>> index 0000000000..86f33f2d8c
>> --- /dev/null
>> +++ b/arch/arm/mach-k3/j784s4_fdt.c
>> @@ -0,0 +1,15 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * J784S4: SoC specific initialization
>> + *
>> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
>> + * Apurva Nandan <a-nandan at ti.com>
>> + */
>> +
>> +#include "common_fdt.h"
>> +#include <fdt_support.h>
>> +
>> +int ft_system_setup(void *blob, struct bd_info *bd)
>> +{
>> + return fdt_fixup_msmc_ram_k3(blob);
>> +}
> This file is exactly same as j721e_fdt.c and j721s2_fdt.c.
>
> Can we please consolidate the 3 files into 1 and reuse among all J7 variants?
>
>> diff --git a/arch/arm/mach-k3/j784s4_init.c b/arch/arm/mach-k3/j784s4_init.c
> <snip>
>
More information about the U-Boot
mailing list