[PATCH] spi: zynqmp_qspi: Change flush cache to invalidate cache

Venkatesh Yadav Abbarapu venkatesh.abbarapu at amd.com
Thu Sep 14 12:47:24 CEST 2023


From: Ashok Reddy Soma <ashok.reddy.soma at amd.com>

Before DMA read, ideally cache should be invalidated, so that data from
memory will be updated to cache after DMA is completed. But
flush_dcache_range is being used which is incorrect. Change
flush_dcache_range to invalidate_dcache_range.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
 drivers/spi/zynqmp_gqspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c
index c4aee279aa..a506d15227 100644
--- a/drivers/spi/zynqmp_gqspi.c
+++ b/drivers/spi/zynqmp_gqspi.c
@@ -690,7 +690,7 @@ static int zynqmp_qspi_start_dma(struct zynqmp_qspi_priv *priv,
 		writel(GQSPI_DMA_DST_I_STS_MASK, &dma_regs->dmaier);
 		addr = (unsigned long)buf;
 		size = roundup(priv->len, GQSPI_DMA_ALIGN);
-		flush_dcache_range(addr, addr + size);
+		invalidate_dcache_range(addr, addr + size);
 
 		while (priv->len) {
 			zynqmp_qspi_calc_exp(priv, &gen_fifo_cmd);
-- 
2.17.1



More information about the U-Boot mailing list