[PATCH 09/14] arm64: dts: zynqmp: zcu106a: Describe DisplayPort connector

[Michal Simek]

From: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/dts/zynqmp-zcu106-revA.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index f8019c592a7f..4b8c69407ff6 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -150,6 +150,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <114285000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -1065,4 +1077,12 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+	ports {
+		port at 5 {
+			dpsub_dp_out: endpoint {
+				remote-endpoint = <&dpcon_in>;
+			};
+		};
+	};
 };
-- 
2.36.1