[PATCH] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL
Neil Armstrong
neil.armstrong at linaro.org
Thu Sep 28 11:02:25 CEST 2023
On 25/09/2023 23:55, Jonas Karlman wrote:
> With MMC_PWRSEQ enabled the following link issue may happen when
> building SPL and SPL_PWRSEQ is not enabled.
>
> aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function `meson_mmc_probe':
> drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
>
> Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
> pwrseq support in SPL.
>
> Also add depends on DM_GPIO to fix following link issue:
>
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function `mmc_pwrseq_set_power':
> drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference to `dm_gpio_set_value'
> aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference to `dm_gpio_set_value'
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
> drivers/mmc/Kconfig | 10 +++++++++-
> drivers/mmc/Makefile | 2 +-
> drivers/mmc/meson_gx_mmc.c | 2 +-
> drivers/mmc/rockchip_dw_mmc.c | 2 +-
> include/mmc.h | 4 ++--
> 5 files changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index de01b9687bad..a9931d39412d 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -20,11 +20,19 @@ config MMC_WRITE
>
> config MMC_PWRSEQ
> bool "HW reset support for eMMC"
> - depends on PWRSEQ
> + depends on PWRSEQ && DM_GPIO
> help
> Ths select Hardware reset support aka pwrseq-emmc for eMMC
> devices.
>
> +config SPL_MMC_PWRSEQ
> + bool "HW reset support for eMMC in SPL"
> + depends on SPL_PWRSEQ && SPL_DM_GPIO
> + default y if MMC_PWRSEQ
> + help
> + Ths select Hardware reset support aka pwrseq-emmc for eMMC
> + devices in SPL.
> +
> config MMC_BROKEN_CD
> bool "Poll for broken card detection case"
> help
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 2c65c4765ab2..0a79dd058bef 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
> endif
>
> obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
> -obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
> +obj-$(CONFIG_$(SPL_)MMC_PWRSEQ) += mmc-pwrseq.o
> obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
>
> ifndef CONFIG_$(SPL_)BLK
> diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
> index fcf4f03d1e24..0825c0a2a838 100644
> --- a/drivers/mmc/meson_gx_mmc.c
> +++ b/drivers/mmc/meson_gx_mmc.c
> @@ -288,7 +288,7 @@ static int meson_mmc_probe(struct udevice *dev)
>
> mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /* Enable power if needed */
> ret = mmc_pwrseq_get_power(dev, cfg);
> if (!ret) {
> diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
> index 72c820ee6330..ad4529d6afa8 100644
> --- a/drivers/mmc/rockchip_dw_mmc.c
> +++ b/drivers/mmc/rockchip_dw_mmc.c
> @@ -145,7 +145,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
>
> host->fifo_mode = priv->fifo_mode;
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /* Enable power if needed */
> ret = mmc_pwrseq_get_power(dev, &plat->cfg);
> if (!ret) {
> diff --git a/include/mmc.h b/include/mmc.h
> index 1022db3ffa7c..9aef31ea5deb 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -590,7 +590,7 @@ struct mmc_config {
> uint f_max;
> uint b_max;
> unsigned char part_type;
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> struct udevice *pwr_dev;
> #endif
> };
> @@ -808,7 +808,7 @@ int mmc_deinit(struct mmc *mmc);
> */
> int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);
>
> -#ifdef CONFIG_MMC_PWRSEQ
> +#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
> /**
> * mmc_pwrseq_get_power() - get a power device from device tree
> *
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the U-Boot
mailing list