[PATCH v4 01/13] scmi: refactor the code to hide a channel from devices
Patrice CHOTARD
patrice.chotard at foss.st.com
Wed Sep 13 15:31:03 CEST 2023
On 9/12/23 08:19, AKASHI Takahiro wrote:
> The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel
> reference") added an explicit parameter, channel, but it seems to make
> the code complex.
>
> Hiding this parameter will allow for adding a generic (protocol-agnostic)
> helper function, i.e. for PROTOCOL_VERSION, in a later patch.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> Reviewed-by: Simon Glass <sjg at chromium.org>
> ---
> v4
> * revive scmi_bind_protocols which was accidentally removed
> * remove .per_child_auto from the driver declaration as it is not needed
> v3
> * fix an issue on ST board (reported by Etienne)
> by taking care of cases where probed devices are children of
> SCMI protocol device (i.e. clock devices under CCF)
> See find_scmi_protocol_device().
> * move "per_device_plato_auto" to a succeeding right patch
> v2
> * new patch
> ---
> drivers/clk/clk_scmi.c | 27 ++----
> drivers/firmware/scmi/scmi_agent-uclass.c | 105 ++++++++++++++++------
> drivers/power/regulator/scmi_regulator.c | 26 ++----
> drivers/reset/reset-scmi.c | 19 +---
> include/scmi_agent.h | 15 ++--
> 5 files changed, 104 insertions(+), 88 deletions(-)
>
> diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
> index d172fed24c9d..34a49363a51a 100644
> --- a/drivers/clk/clk_scmi.c
> +++ b/drivers/clk/clk_scmi.c
> @@ -13,17 +13,8 @@
> #include <asm/types.h>
> #include <linux/clk-provider.h>
>
> -/**
> - * struct scmi_clk_priv - Private data for SCMI clocks
> - * @channel: Reference to the SCMI channel to use
> - */
> -struct scmi_clk_priv {
> - struct scmi_channel *channel;
> -};
> -
> static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(dev);
> struct scmi_clk_protocol_attr_out out;
> struct scmi_msg msg = {
> .protocol_id = SCMI_PROTOCOL_ID_CLOCK,
> @@ -33,7 +24,7 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> };
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret)
> return ret;
>
> @@ -44,7 +35,6 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
>
> static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(dev);
> struct scmi_clk_attribute_in in = {
> .clock_id = clkid,
> };
> @@ -59,7 +49,7 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> };
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret)
> return ret;
>
> @@ -70,7 +60,6 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
>
> static int scmi_clk_gate(struct clk *clk, int enable)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> struct scmi_clk_state_in in = {
> .clock_id = clk->id,
> .attributes = enable,
> @@ -81,7 +70,7 @@ static int scmi_clk_gate(struct clk *clk, int enable)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(clk->dev, &msg);
> if (ret)
> return ret;
>
> @@ -100,7 +89,6 @@ static int scmi_clk_disable(struct clk *clk)
>
> static ulong scmi_clk_get_rate(struct clk *clk)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> struct scmi_clk_rate_get_in in = {
> .clock_id = clk->id,
> };
> @@ -110,7 +98,7 @@ static ulong scmi_clk_get_rate(struct clk *clk)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(clk->dev, &msg);
> if (ret < 0)
> return ret;
>
> @@ -123,7 +111,6 @@ static ulong scmi_clk_get_rate(struct clk *clk)
>
> static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> struct scmi_clk_rate_set_in in = {
> .clock_id = clk->id,
> .flags = SCMI_CLK_RATE_ROUND_CLOSEST,
> @@ -136,7 +123,7 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(clk->dev, &msg);
> if (ret < 0)
> return ret;
>
> @@ -149,12 +136,11 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
>
> static int scmi_clk_probe(struct udevice *dev)
> {
> - struct scmi_clk_priv *priv = dev_get_priv(dev);
> struct clk *clk;
> size_t num_clocks, i;
> int ret;
>
> - ret = devm_scmi_of_get_channel(dev, &priv->channel);
> + ret = devm_scmi_of_get_channel(dev);
> if (ret)
> return ret;
>
> @@ -205,5 +191,4 @@ U_BOOT_DRIVER(scmi_clock) = {
> .id = UCLASS_CLK,
> .ops = &scmi_clk_ops,
> .probe = scmi_clk_probe,
> - .priv_auto = sizeof(struct scmi_clk_priv *),
> };
> diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
> index 02de692d66f3..75744cb35d7c 100644
> --- a/drivers/firmware/scmi/scmi_agent-uclass.c
> +++ b/drivers/firmware/scmi/scmi_agent-uclass.c
> @@ -8,6 +8,7 @@
> #include <common.h>
> #include <dm.h>
> #include <errno.h>
> +#include <scmi_agent.h>
> #include <scmi_agent-uclass.h>
> #include <scmi_protocols.h>
> #include <dm/device_compat.h>
> @@ -110,18 +111,23 @@ static int scmi_bind_protocols(struct udevice *dev)
> return ret;
> }
>
> -static struct udevice *find_scmi_transport_device(struct udevice *dev)
> +static struct udevice *find_scmi_protocol_device(struct udevice *dev)
> {
> - struct udevice *parent = dev;
> + struct udevice *parent = NULL, *protocol;
>
> - do {
> - parent = dev_get_parent(parent);
> - } while (parent && device_get_uclass_id(parent) != UCLASS_SCMI_AGENT);
> + for (protocol = dev; protocol; protocol = parent) {
> + parent = dev_get_parent(protocol);
> + if (!parent ||
> + device_get_uclass_id(parent) == UCLASS_SCMI_AGENT)
> + break;
> + }
>
> - if (!parent)
> + if (!parent) {
> dev_err(dev, "Invalid SCMI device, agent not found\n");
> + return NULL;
> + }
>
> - return parent;
> + return protocol;
> }
>
> static const struct scmi_agent_ops *transport_dev_ops(struct udevice *dev)
> @@ -129,43 +135,90 @@ static const struct scmi_agent_ops *transport_dev_ops(struct udevice *dev)
> return (const struct scmi_agent_ops *)dev->driver->ops;
> }
>
> -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> +/**
> + * scmi_of_get_channel() - Get SCMI channel handle
> + *
> + * @dev: SCMI agent device
> + * @channel: Output reference to the SCMI channel upon success
> + *
> + * On return, @channel will be set.
> + * Return 0 on success and a negative errno on failure
> + */
> +static int scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> {
> - struct udevice *parent;
> + const struct scmi_agent_ops *ops;
>
> - parent = find_scmi_transport_device(dev);
> - if (!parent)
> + ops = transport_dev_ops(dev);
> + if (ops->of_get_channel)
> + return ops->of_get_channel(dev, channel);
> + else
> + return -EPROTONOSUPPORT;
> +}
> +
> +int devm_scmi_of_get_channel(struct udevice *dev)
> +{
> + struct udevice *protocol;
> + struct scmi_agent_proto_priv *priv;
> + int ret;
> +
> + protocol = find_scmi_protocol_device(dev);
> + if (!protocol)
> return -ENODEV;
>
> - if (transport_dev_ops(parent)->of_get_channel)
> - return transport_dev_ops(parent)->of_get_channel(parent, channel);
> + priv = dev_get_parent_priv(protocol);
> + ret = scmi_of_get_channel(protocol->parent, &priv->channel);
> + if (ret == -EPROTONOSUPPORT) {
> + /* Drivers without a get_channel operator don't need a channel ref */
> + priv->channel = NULL;
>
> - /* Drivers without a get_channel operator don't need a channel ref */
> - *channel = NULL;
> + return 0;
> + }
>
> - return 0;
> + return ret;
> }
>
> -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> - struct scmi_msg *msg)
> +/**
> + * scmi_process_msg() - Send and process an SCMI message
> + *
> + * Send a message to an SCMI server.
> + * Caller sets scmi_msg::out_msg_sz to the output message buffer size.
> + *
> + * @dev: SCMI agent device
> + * @channel: Communication channel for the device
> + * @msg: Message structure reference
> + *
> + * On return, scmi_msg::out_msg_sz stores the response payload size.
> + * Return: 0 on success and a negative errno on failure
> + */
> +static int scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> + struct scmi_msg *msg)
> {
> const struct scmi_agent_ops *ops;
> - struct udevice *parent;
>
> - parent = find_scmi_transport_device(dev);
> - if (!parent)
> - return -ENODEV;
> + ops = transport_dev_ops(dev);
> + if (ops->process_msg)
> + return ops->process_msg(dev, channel, msg);
> + else
> + return -EPROTONOSUPPORT;
> +}
>
> - ops = transport_dev_ops(parent);
> +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg)
> +{
> + struct udevice *protocol;
> + struct scmi_agent_proto_priv *priv;
>
> - if (ops->process_msg)
> - return ops->process_msg(parent, channel, msg);
> + protocol = find_scmi_protocol_device(dev);
> + if (!protocol)
> + return -ENODEV;
> +
> + priv = dev_get_parent_priv(protocol);
>
> - return -EPROTONOSUPPORT;
> + return scmi_process_msg(protocol->parent, priv->channel, msg);
> }
>
> UCLASS_DRIVER(scmi_agent) = {
> .id = UCLASS_SCMI_AGENT,
> .name = "scmi_agent",
> .post_bind = scmi_bind_protocols,
> + .per_child_auto = sizeof(struct scmi_agent_proto_priv *),
.per_child_auto callback is not using the correct sizeof argument.
sizeof(struct scmi_agent_proto_priv *) always returns 4 which is the size of a pointer.
sizeof(struct scmi_agent_proto_priv) must be used instead to return the effective size of the structure.
Thanks
Patrice
> };
> diff --git a/drivers/power/regulator/scmi_regulator.c b/drivers/power/regulator/scmi_regulator.c
> index 801148036ff6..9c72c35d039e 100644
> --- a/drivers/power/regulator/scmi_regulator.c
> +++ b/drivers/power/regulator/scmi_regulator.c
> @@ -25,18 +25,9 @@ struct scmi_regulator_platdata {
> u32 domain_id;
> };
>
> -/**
> - * struct scmi_regulator_priv - Private data for SCMI voltage regulator
> - * @channel: Reference to the SCMI channel to use
> - */
> -struct scmi_regulator_priv {
> - struct scmi_channel *channel;
> -};
> -
> static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> {
> struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> struct scmi_voltd_config_set_in in = {
> .domain_id = pdata->domain_id,
> .config = enable ? SCMI_VOLTD_CONFIG_ON : SCMI_VOLTD_CONFIG_OFF,
> @@ -47,7 +38,7 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret)
> return ret;
>
> @@ -57,7 +48,6 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> static int scmi_voltd_get_enable(struct udevice *dev)
> {
> struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> struct scmi_voltd_config_get_in in = {
> .domain_id = pdata->domain_id,
> };
> @@ -67,7 +57,7 @@ static int scmi_voltd_get_enable(struct udevice *dev)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret < 0)
> return ret;
>
> @@ -80,7 +70,6 @@ static int scmi_voltd_get_enable(struct udevice *dev)
>
> static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> {
> - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> struct scmi_voltd_level_set_in in = {
> .domain_id = pdata->domain_id,
> @@ -92,7 +81,7 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret < 0)
> return ret;
>
> @@ -101,7 +90,6 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
>
> static int scmi_voltd_get_voltage_level(struct udevice *dev)
> {
> - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> struct scmi_voltd_level_get_in in = {
> .domain_id = pdata->domain_id,
> @@ -112,7 +100,7 @@ static int scmi_voltd_get_voltage_level(struct udevice *dev)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(dev, &msg);
> if (ret < 0)
> return ret;
>
> @@ -140,7 +128,6 @@ static int scmi_regulator_of_to_plat(struct udevice *dev)
> static int scmi_regulator_probe(struct udevice *dev)
> {
> struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> struct scmi_voltd_attr_in in = { 0 };
> struct scmi_voltd_attr_out out = { 0 };
> struct scmi_msg scmi_msg = {
> @@ -153,14 +140,14 @@ static int scmi_regulator_probe(struct udevice *dev)
> };
> int ret;
>
> - ret = devm_scmi_of_get_channel(dev->parent, &priv->channel);
> + ret = devm_scmi_of_get_channel(dev);
> if (ret)
> return ret;
>
> /* Check voltage domain is known from SCMI server */
> in.domain_id = pdata->domain_id;
>
> - ret = devm_scmi_process_msg(dev, priv->channel, &scmi_msg);
> + ret = devm_scmi_process_msg(dev, &scmi_msg);
> if (ret) {
> dev_err(dev, "Failed to query voltage domain %u: %d\n",
> pdata->domain_id, ret);
> @@ -184,7 +171,6 @@ U_BOOT_DRIVER(scmi_regulator) = {
> .probe = scmi_regulator_probe,
> .of_to_plat = scmi_regulator_of_to_plat,
> .plat_auto = sizeof(struct scmi_regulator_platdata),
> - .priv_auto = sizeof(struct scmi_regulator_priv *),
> };
>
> static int scmi_regulator_bind(struct udevice *dev)
> diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c
> index 122556162ec3..b76711f0a8fb 100644
> --- a/drivers/reset/reset-scmi.c
> +++ b/drivers/reset/reset-scmi.c
> @@ -13,17 +13,8 @@
> #include <scmi_protocols.h>
> #include <asm/types.h>
>
> -/**
> - * struct scmi_reset_priv - Private data for SCMI reset controller
> - * @channel: Reference to the SCMI channel to use
> - */
> -struct scmi_reset_priv {
> - struct scmi_channel *channel;
> -};
> -
> static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> {
> - struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> struct scmi_rd_reset_in in = {
> .domain_id = rst->id,
> .flags = assert_not_deassert ? SCMI_RD_RESET_FLAG_ASSERT : 0,
> @@ -35,7 +26,7 @@ static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> in, out);
> int ret;
>
> - ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(rst->dev, &msg);
> if (ret)
> return ret;
>
> @@ -54,7 +45,6 @@ static int scmi_reset_deassert(struct reset_ctl *rst)
>
> static int scmi_reset_request(struct reset_ctl *rst)
> {
> - struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> struct scmi_rd_attr_in in = {
> .domain_id = rst->id,
> };
> @@ -68,7 +58,7 @@ static int scmi_reset_request(struct reset_ctl *rst)
> * We don't really care about the attribute, just check
> * the reset domain exists.
> */
> - ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> + ret = devm_scmi_process_msg(rst->dev, &msg);
> if (ret)
> return ret;
>
> @@ -83,9 +73,7 @@ static const struct reset_ops scmi_reset_domain_ops = {
>
> static int scmi_reset_probe(struct udevice *dev)
> {
> - struct scmi_reset_priv *priv = dev_get_priv(dev);
> -
> - return devm_scmi_of_get_channel(dev, &priv->channel);
> + return devm_scmi_of_get_channel(dev);
> }
>
> U_BOOT_DRIVER(scmi_reset_domain) = {
> @@ -93,5 +81,4 @@ U_BOOT_DRIVER(scmi_reset_domain) = {
> .id = UCLASS_RESET,
> .ops = &scmi_reset_domain_ops,
> .probe = scmi_reset_probe,
> - .priv_auto = sizeof(struct scmi_reset_priv *),
> };
> diff --git a/include/scmi_agent.h b/include/scmi_agent.h
> index ee6286366df7..577892029ff8 100644
> --- a/include/scmi_agent.h
> +++ b/include/scmi_agent.h
> @@ -15,6 +15,14 @@
> struct udevice;
> struct scmi_channel;
>
> +/**
> + * struct scmi_agent_proto_priv - Private data in device for SCMI agent
> + * @channel: Reference to the SCMI channel to use
> + */
> +struct scmi_agent_proto_priv {
> + struct scmi_channel *channel;
> +};
> +
> /*
> * struct scmi_msg - Context of a SCMI message sent and the response received
> *
> @@ -49,10 +57,9 @@ struct scmi_msg {
> * devm_scmi_of_get_channel() - Get SCMI channel handle from SCMI agent DT node
> *
> * @dev: Device requesting a channel
> - * @channel: Output reference to the SCMI channel upon success
> * @return 0 on success and a negative errno on failure
> */
> -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel);
> +int devm_scmi_of_get_channel(struct udevice *dev);
>
> /**
> * devm_scmi_process_msg() - Send and process an SCMI message
> @@ -62,12 +69,10 @@ int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> * On return, scmi_msg::out_msg_sz stores the response payload size.
> *
> * @dev: SCMI device
> - * @channel: Communication channel for the device
> * @msg: Message structure reference
> * Return: 0 on success and a negative errno on failure
> */
> -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> - struct scmi_msg *msg);
> +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg);
>
> /**
> * scmi_to_linux_errno() - Convert an SCMI error code into a Linux errno code
More information about the U-Boot
mailing list