[PATCH 2/6] arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase

[Roger Quadros]

CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
USB and MMC nodes need pinmux.

Mark them as 'bootph-all' so they are available in all
pre-relocation phases.

Fixes below dts warning:

<stdout>: Warning (dmas_property): /bus at f4000/ethernet at 8000000:dmas: Could not get phandle node for (cell 0)

Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
 arch/arm/dts/k3-am642-evm-u-boot.dtsi | 48 +++++++++++++++++++++++++++
 arch/arm/dts/k3-am642-r5-evm.dts      |  8 +++++
 2 files changed, 56 insertions(+)

diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
index d06955dfbc..953bbe9aaf 100644
--- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi
@@ -51,6 +51,10 @@
 	bootph-all;
 };
 
+&main_usb0_pins_default {
+	bootph-all;
+};
+
 &usb0 {
 	dr_mode="peripheral";
 	bootph-all;
@@ -100,12 +104,56 @@
 	bootph-all;
 };
 
+&main_mmc1_pins_default {
+	bootph-all;
+};
+
 &sdhci1 {
 	bootph-all;
 };
 
+&inta_main_dmss {
+	bootph-all;
+};
+
+&main_pktdma {
+	bootph-all;
+};
+
+&mdio1_pins_default {
+	bootph-all;
+};
+
+&cpsw3g_mdio {
+	bootph-all;
+};
+
+&cpsw3g_phy0 {
+	bootph-all;
+};
+
+&rgmii1_pins_default {
+	bootph-all;
+};
+
+&rgmii2_pins_default {
+	bootph-all;
+};
+
 &cpsw3g {
 	bootph-all;
+
+	ethernet-ports {
+		bootph-all;
+	};
+};
+
+&phy_gmii_sel {
+	bootph-all;
+};
+
+&cpsw_port1 {
+	bootph-all;
 };
 
 &cpsw_port2 {
diff --git a/arch/arm/dts/k3-am642-r5-evm.dts b/arch/arm/dts/k3-am642-r5-evm.dts
index 696735d8e2..64b3c3af63 100644
--- a/arch/arm/dts/k3-am642-r5-evm.dts
+++ b/arch/arm/dts/k3-am642-r5-evm.dts
@@ -74,6 +74,14 @@
 	ti,secure-host;
 };
 
+&vtt_supply {
+	bootph-pre-ram;
+};
+
+&memorycontroller {
+	vtt-supply = <&vtt_supply>;
+};
+
 &sdhci0 {
 	clocks = <&clk_200mhz>;
 	clock-names = "clk_xin";
-- 
2.34.1