[PATCH 02/14] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node

[Michal Simek]

From: Tanmay Shah <tanmay.shah at amd.com>

RPU subsystem can be configured in cluster-mode or split mode.
Also each r5 core has separate power domains.

Signed-off-by: Tanmay Shah <tanmay.shah at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/dts/zynqmp.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 951f3f795e97..5c67c6f602f2 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -120,6 +120,22 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rproc_0_fw_image: memory at 3ed00000 {
+			no-map;
+			reg = <0x0 0x3ed00000 0x0 0x40000>;
+		};
+
+		rproc_1_fw_image: memory at 3ef00000 {
+			no-map;
+			reg = <0x0 0x3ef00000 0x0 0x40000>;
+		};
+	};
+
 	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
@@ -248,6 +264,23 @@
 		power-domains = <&zynqmp_firmware PD_PL>;
 	};
 
+	remoteproc {
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <1>;
+
+		r5f-0 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f-1 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
 	amba: axi {
 		compatible = "simple-bus";
 		bootph-all;
-- 
2.36.1