[PATCH v3 11/16] board: ti: j784s4: Add support for board detection by EEPROM read

[Nishanth Menon]

On 16:35-20230908, Apurva Nandan wrote:
> From: Dasnavis Sabiya <sabiya.d at ti.com>
> 
> The board name is programmed in the EEPROM. Add support for board
> detection and choose the right dtb based on the board name read
> from EEPROM.
> 
> The J784S4/AM69 has two platforms naming J784S4-EVM and AM69-SK. The
> J784S4 has EEPROM populated at 0x50. AM69 SK has EEPROM
> populated at next address 0x51. So start looking for TI specific EEPROM
> at 0x50, if not found look for EEPROM at 0x51.
> 
> Also, add support for setup_serial() to read the serial number from EEPROM
> and update the serial environment variable with the same.
> 
> Signed-off-by: Dasnavis Sabiya <sabiya.d at ti.com>
> Signed-off-by: Apurva Nandan <a-nandan at ti.com>


NAK. go with the approach similar to AM62x. AM69-SK has it's own
fragment.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D