[PATCH v3 00/16]Introduce initial TI's J784S4 and AM69 support
Apurva Nandan
a-nandan at ti.com
Fri Sep 8 13:05:35 CEST 2023
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to SPL and u-boot and do not have
dependency on other trees. Appreciate a review for acceptance to u-boot
tree.
Here are some of the salient features of the J784S4 automotive grade
application processor:
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.
Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It
supports the following interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x2 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances
Schematics: https://www.ti.com/lit/zip/sprr458
bootlog: https://paste.sr.ht/~hnagalla/f14840abc854519f912923662f1fdc8075d92107
Changes in v3:
1) Added AM69 SK support in the series
2) Switched from distroboot to bootstd support
3) Added remoteproc support for J784S4
4) Added documentation for both SoCs
5) Added binman support
6) Removed unnecessarry nodes from r5-evm.dts and evm-u-boot.dtsi
7) Added HS device support
8) Added env file for environement variables
9) Removed ti-serdes-mux bindings
10) Cleaned up all files and synced with latest
11) Addressed all previous review comments
Note: The base dts files have been sync from next-20230905 linux tag as per review comment received
on previous re-roll:
https://lore.kernel.org/u-boot/20230321155227.GV8135@bill-the-cat/
Link to v2:
https://lore.kernel.org/u-boot/20230321141028.24456-1-hnagalla@ti.com/
Changes in v2:
- Refactored environement scripts to 'j784s4.env' and removed scripts not
needed for basic board bootup.
- Imported the J7874S4 basic device tree files from v6.2 linux kernel.
- Moved j784s4 clock definitions and clock data into one patch/commit.
- coalesce board commits into one commit.
Apurva Nandan (9):
arm: dts: Introduce j784s4 dts from linux kernel
arm: mach-k3: Add basic support for J784S4 SoC definition
soc: ti: k3-socinfo: Add entry for J784S4 SoC
arm: mach-k3: j784s4: Add clk and power support
drivers: dma: Add support for J784S4 SoC
board: ti: j784s4: Add board support for J784S4 EVM
arm: dts: Introduce j784s4 u-boot dts files
configs: j784s4_evm: Add defconfig for j784s4 evm and am69 sk
doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation
Dasnavis Sabiya (5):
arm: dts: Introduce am69-sk dts from linux kernel
board: ti: j784s4: Add support for board detection by EEPROM read
board: ti: j784s4: Update env to use am69-sk dtb
arm: dts: Introduce am69-sk u-boot dts files
arm: dts: k3-j784s4-binman: Add support for AM69 SK
Hari Nagalla (2):
remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs
remoteproc: k3-dsp: Extend support for C71x DSPs on J784S4 SoCs
arch/arm/dts/Makefile | 4 +
arch/arm/dts/k3-am69-r5-sk.dts | 105 +
arch/arm/dts/k3-am69-sk-u-boot.dtsi | 25 +
arch/arm/dts/k3-am69-sk.dts | 364 +
arch/arm/dts/k3-j784s4-binman.dtsi | 597 ++
arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi | 8757 ++++++++++++++++
arch/arm/dts/k3-j784s4-ddr.dtsi | 8858 +++++++++++++++++
arch/arm/dts/k3-j784s4-evm-u-boot.dtsi | 25 +
arch/arm/dts/k3-j784s4-evm.dts | 864 ++
arch/arm/dts/k3-j784s4-main.dtsi | 1571 +++
arch/arm/dts/k3-j784s4-mcu-wakeup.dtsi | 703 ++
arch/arm/dts/k3-j784s4-r5-evm.dts | 105 +
arch/arm/dts/k3-j784s4-thermal.dtsi | 101 +
arch/arm/dts/k3-j784s4.dtsi | 294 +
arch/arm/mach-k3/Kconfig | 17 +-
arch/arm/mach-k3/Makefile | 3 +
arch/arm/mach-k3/arm64-mmu.c | 52 +
arch/arm/mach-k3/include/mach/hardware.h | 5 +
.../mach-k3/include/mach/j784s4_hardware.h | 60 +
arch/arm/mach-k3/include/mach/j784s4_spl.h | 46 +
arch/arm/mach-k3/include/mach/spl.h | 6 +-
arch/arm/mach-k3/j784s4/Makefile | 5 +
arch/arm/mach-k3/j784s4/clk-data.c | 428 +
arch/arm/mach-k3/j784s4/dev-data.c | 98 +
arch/arm/mach-k3/j784s4_fdt.c | 15 +
arch/arm/mach-k3/j784s4_init.c | 332 +
board/ti/j784s4/Kconfig | 63 +
board/ti/j784s4/MAINTAINERS | 21 +
board/ti/j784s4/Makefile | 8 +
board/ti/j784s4/board-cfg.yaml | 36 +
board/ti/j784s4/evm.c | 183 +
board/ti/j784s4/j784s4.env | 37 +
board/ti/j784s4/pm-cfg.yaml | 12 +
board/ti/j784s4/rm-cfg.yaml | 3057 ++++++
board/ti/j784s4/sec-cfg.yaml | 379 +
board/ti/j784s4/tifs-rm-cfg.yaml | 2655 +++++
configs/j784s4_evm_a72_defconfig | 181 +
configs/j784s4_evm_r5_defconfig | 164 +
doc/board/ti/j784s4_evm.rst | 339 +
doc/board/ti/k3.rst | 1 +
drivers/clk/ti/clk-k3.c | 6 +
drivers/dma/ti/Makefile | 1 +
drivers/dma/ti/k3-psil-j784s4.c | 166 +
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c | 2 +
drivers/firmware/ti_sci_static_data.h | 34 +
drivers/power/domain/ti-power-domain.c | 6 +
drivers/ram/Kconfig | 2 +-
drivers/remoteproc/ti_k3_dsp_rproc.c | 4 +-
drivers/remoteproc/ti_k3_r5f_rproc.c | 6 +-
drivers/soc/soc_ti_k3.c | 3 +
include/configs/j784s4_evm.h | 20 +
include/k3-clk.h | 1 +
include/k3-dev.h | 1 +
54 files changed, 30817 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/dts/k3-am69-r5-sk.dts
create mode 100644 arch/arm/dts/k3-am69-sk-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-am69-sk.dts
create mode 100644 arch/arm/dts/k3-j784s4-binman.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-ddr-evm-lp4-4266.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-ddr.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-evm-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-evm.dts
create mode 100644 arch/arm/dts/k3-j784s4-main.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-mcu-wakeup.dtsi
create mode 100644 arch/arm/dts/k3-j784s4-r5-evm.dts
create mode 100644 arch/arm/dts/k3-j784s4-thermal.dtsi
create mode 100644 arch/arm/dts/k3-j784s4.dtsi
create mode 100644 arch/arm/mach-k3/include/mach/j784s4_hardware.h
create mode 100644 arch/arm/mach-k3/include/mach/j784s4_spl.h
create mode 100644 arch/arm/mach-k3/j784s4/Makefile
create mode 100644 arch/arm/mach-k3/j784s4/clk-data.c
create mode 100644 arch/arm/mach-k3/j784s4/dev-data.c
create mode 100644 arch/arm/mach-k3/j784s4_fdt.c
create mode 100644 arch/arm/mach-k3/j784s4_init.c
create mode 100644 board/ti/j784s4/Kconfig
create mode 100644 board/ti/j784s4/MAINTAINERS
create mode 100644 board/ti/j784s4/Makefile
create mode 100644 board/ti/j784s4/board-cfg.yaml
create mode 100644 board/ti/j784s4/evm.c
create mode 100644 board/ti/j784s4/j784s4.env
create mode 100644 board/ti/j784s4/pm-cfg.yaml
create mode 100644 board/ti/j784s4/rm-cfg.yaml
create mode 100644 board/ti/j784s4/sec-cfg.yaml
create mode 100644 board/ti/j784s4/tifs-rm-cfg.yaml
create mode 100644 configs/j784s4_evm_a72_defconfig
create mode 100644 configs/j784s4_evm_r5_defconfig
create mode 100644 doc/board/ti/j784s4_evm.rst
create mode 100644 drivers/dma/ti/k3-psil-j784s4.c
create mode 100644 include/configs/j784s4_evm.h
--
2.34.1
More information about the U-Boot
mailing list