[PATCH 10/10] ARM: dts: stm32: support display on stm32f746-disco board
Dario Binacchi
dario.binacchi at amarulasolutions.com
Sun Sep 3 22:48:49 CEST 2023
The patch applies the changes from Linux commit 10a970bc3ebfa ("ARM: dts:
stm32: support display on stm32f746-disco board") and removes the same
settings from stm32f746-disco-u-boot.dtsi.
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---
arch/arm/dts/stm32f746-disco-u-boot.dtsi | 89 ++++++------------------
arch/arm/dts/stm32f746-disco.dts | 44 ++++++++++++
2 files changed, 66 insertions(+), 67 deletions(-)
diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index 3c2b9fc59512..1b42d6cbbc19 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -23,12 +23,6 @@
spi0 = &qspi;
};
- backlight: backlight {
- compatible = "gpio-backlight";
- gpios = <&gpiok 3 0>;
- status = "okay";
- };
-
button1 {
compatible = "st,button1";
button-gpio = <&gpioi 11 0>;
@@ -38,37 +32,10 @@
compatible = "st,led1";
led-gpio = <&gpioi 1 0>;
};
-
- panel-rgb at 0 {
- compatible = "simple-panel";
- backlight = <&backlight>;
- enable-gpios = <&gpioi 12 0>;
- status = "okay";
-
- display-timings {
- timing at 0 {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <2>;
- hback-porch = <2>;
- hsync-len = <41>;
- vfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
};
<dc {
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
- pinctrl-0 = <<dc_pins>;
- status = "okay";
bootph-all;
};
@@ -96,6 +63,28 @@
};
};
+&panel_rgb {
+ compatible = "simple-panel";
+
+ display-timings {
+ timing at 0 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <2>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ vfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+};
+
&pinctrl {
ethernet_mii: mii at 0 {
pins {
@@ -160,40 +149,6 @@
};
};
- ltdc_pins: ltdc at 0 {
- pins {
- pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
- <STM32_PINMUX('G',12, AF9)>, /* B4 */
- <STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
- <STM32_PINMUX('I',10, AF14)>, /* HSYNC */
- <STM32_PINMUX('I',14, AF14)>, /* CLK */
- <STM32_PINMUX('I',15, AF14)>, /* R0 */
- <STM32_PINMUX('J', 0, AF14)>, /* R1 */
- <STM32_PINMUX('J', 1, AF14)>, /* R2 */
- <STM32_PINMUX('J', 2, AF14)>, /* R3 */
- <STM32_PINMUX('J', 3, AF14)>, /* R4 */
- <STM32_PINMUX('J', 4, AF14)>, /* R5 */
- <STM32_PINMUX('J', 5, AF14)>, /* R6 */
- <STM32_PINMUX('J', 6, AF14)>, /* R7 */
- <STM32_PINMUX('J', 7, AF14)>, /* G0 */
- <STM32_PINMUX('J', 8, AF14)>, /* G1 */
- <STM32_PINMUX('J', 9, AF14)>, /* G2 */
- <STM32_PINMUX('J',10, AF14)>, /* G3 */
- <STM32_PINMUX('J',11, AF14)>, /* G4 */
- <STM32_PINMUX('J',13, AF14)>, /* B1 */
- <STM32_PINMUX('J',14, AF14)>, /* B2 */
- <STM32_PINMUX('J',15, AF14)>, /* B3 */
- <STM32_PINMUX('K', 0, AF14)>, /* G5 */
- <STM32_PINMUX('K', 1, AF14)>, /* G6 */
- <STM32_PINMUX('K', 2, AF14)>, /* G7 */
- <STM32_PINMUX('K', 4, AF14)>, /* B5 */
- <STM32_PINMUX('K', 5, AF14)>, /* B6 */
- <STM32_PINMUX('K', 6, AF14)>, /* B7 */
- <STM32_PINMUX('K', 7, AF14)>; /* DE */
- slew-rate = <2>;
- };
- };
-
qspi_pins: qspi at 0 {
pins {
pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index e1564d69f9f6..431275134033 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -25,6 +25,19 @@
reg = <0xC0000000 0x800000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x80000>;
+ linux,dma-default;
+ };
+ };
+
aliases {
serial0 = &usart1;
};
@@ -50,6 +63,25 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "rocktech,rk043fn48h";
+ power-supply = <&vcc_3v3>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
};
&clk_hse {
@@ -80,6 +112,18 @@
};
};
+<dc {
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
&sdio1 {
status = "okay";
vmmc-supply = <&vcc_3v3>;
--
2.34.1
More information about the U-Boot
mailing list