[PATCH 04/19] ARM: dts: renesas: Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3
Marek Vasut
marek.vasut+renesas at mailbox.org
Sun Sep 17 16:13:04 CEST 2023
Synchronize R-Car R8A77951 H3 DTs with Linux 6.5.3,
commit 238589d0f7b421aae18c5704dc931595019fa6c7 .
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
arch/arm/dts/r8a77951.dtsi | 15 +-
arch/arm/dts/salvator-common.dtsi | 253 +++++++++++++++++++----
arch/arm/dts/salvator-xs.dtsi | 56 +++++
arch/arm/dts/ulcb-audio-graph-card.dtsi | 85 ++++++++
arch/arm/dts/ulcb-audio-graph-card2.dtsi | 26 +++
arch/arm/dts/ulcb.dtsi | 74 ++-----
6 files changed, 408 insertions(+), 101 deletions(-)
create mode 100644 arch/arm/dts/ulcb-audio-graph-card.dtsi
create mode 100644 arch/arm/dts/ulcb-audio-graph-card2.dtsi
diff --git a/arch/arm/dts/r8a77951.dtsi b/arch/arm/dts/r8a77951.dtsi
index 07c8763c1e7..6d15229d25a 100644
--- a/arch/arm/dts/r8a77951.dtsi
+++ b/arch/arm/dts/r8a77951.dtsi
@@ -75,7 +75,6 @@
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <900000>;
clock-latency-ns = <300000>;
- turbo-mode;
};
opp-1700000000 {
opp-hz = /bits/ 64 <1700000000>;
@@ -1998,7 +1997,7 @@
rcar_sound: sound at ec500000 {
/*
- * #sound-dai-cells is required
+ * #sound-dai-cells is required if simple-card
*
* Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
* Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
@@ -2779,8 +2778,8 @@
<0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
<0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
<0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
- /* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ /* Map all possible DDR/IOMMU as inbound ranges */
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -2791,6 +2790,8 @@
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 319>;
+ iommu-map = <0 &ipmmu_hc 0 1>;
+ iommu-map-mask = <0>;
status = "disabled";
};
@@ -2806,8 +2807,8 @@
<0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
<0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
<0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
- /* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ /* Map all possible DDR/IOMMU as inbound ranges */
+ dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
@@ -2818,6 +2819,8 @@
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 318>;
+ iommu-map = <0 &ipmmu_hc 1 1>;
+ iommu-map-mask = <0>;
status = "disabled";
};
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 23fdd1115b2..4a3d5037821 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -33,9 +33,20 @@
/ {
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
serial0 = &scif2;
serial1 = &hscif1;
ethernet0 = &avb;
+ mmc0 = &sdhi2;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi3;
};
chosen {
@@ -94,6 +105,7 @@
port {
hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
};
};
};
@@ -166,7 +178,7 @@
};
};
- reg_1p8v: regulator0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
@@ -175,7 +187,7 @@
regulator-always-on;
};
- reg_3p3v: regulator1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
@@ -184,7 +196,7 @@
regulator-always-on;
};
- reg_12v: regulator2 {
+ reg_12v: regulator-12v {
compatible = "regulator-fixed";
regulator-name = "fixed-12V";
regulator-min-microvolt = <12000000>;
@@ -198,7 +210,12 @@
label = "rcar-sound";
- dais = <&rsnd_port0>;
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+#ifdef SOC_HAS_HDMI1
+ &rsnd_port2 /* HDMI1 */
+#endif
+ >;
};
vbus0_usb2: regulator-vbus0-usb2 {
@@ -316,6 +333,10 @@
};
};
+&a57_0 {
+ cpu-supply = <&dvfs>;
+};
+
&audio_clk_a {
clock-frequency = <22579200>;
};
@@ -324,7 +345,7 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy at 0 {
@@ -343,7 +364,6 @@
ports {
port at 0 {
- reg = <0>;
csi20_in: endpoint {
clock-lanes = <0>;
data-lanes = <1>;
@@ -358,8 +378,6 @@
ports {
port at 0 {
- reg = <0>;
-
csi40_in: endpoint {
clock-lanes = <0>;
data-lanes = <1 2 3 4>;
@@ -376,7 +394,7 @@
ports {
port at 0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&adv7123_in>;
};
};
@@ -396,6 +414,50 @@
clock-frequency = <32768>;
};
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint1>;
+ };
+ };
+ };
+};
+
+#ifdef SOC_HAS_HDMI1
+&hdmi1 {
+ status = "okay";
+
+ ports {
+ port at 1 {
+ reg = <1>;
+ rcar_dw_hdmi1_out: endpoint {
+ remote-endpoint = <&hdmi1_con>;
+ };
+ };
+ port at 2 {
+ reg = <2>;
+ dw_hdmi1_snd_in: endpoint {
+ remote-endpoint = <&rsnd_endpoint2>;
+ };
+ };
+ };
+};
+
+&hdmi1_con {
+ remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+#endif /* SOC_HAS_HDMI1 */
+
&hscif1 {
pinctrl-0 = <&hscif1_pins>;
pinctrl-names = "default";
@@ -469,47 +531,49 @@
reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
"infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
- #address-cells = <1>;
- #size-cells = <0>;
-
interrupt-parent = <&gpio6>;
interrupt-names = "intrq1", "intrq2";
interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
<31 IRQ_TYPE_LEVEL_LOW>;
- port at 7 {
- reg = <7>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 7 {
+ reg = <7>;
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_con>;
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
};
- };
- port at 8 {
- reg = <8>;
+ port at 8 {
+ reg = <8>;
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in_con>;
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
};
- };
- port at a {
- reg = <10>;
+ port at a {
+ reg = <10>;
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
};
- };
- port at b {
- reg = <11>;
+ port at b {
+ reg = <11>;
- adv7482_txb: endpoint {
- clock-lanes = <0>;
- data-lanes = <1>;
- remote-endpoint = <&csi20_in>;
+ adv7482_txb: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
};
};
};
@@ -732,12 +796,9 @@
};
&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
- /* Single DAI */
- #sound-dai-cells = <0>;
-
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
@@ -775,8 +836,85 @@
bitclock-master = <&rsnd_endpoint0>;
frame-master = <&rsnd_endpoint0>;
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
+ playback = <&ssi0>, <&src0>, <&dvc0>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
+ };
+ };
+
+ rsnd_port1: port at 1 {
+ reg = <1>;
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+
+#ifdef SOC_HAS_HDMI1
+ rsnd_port2: port at 2 {
+ reg = <2>;
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+#endif /* SOC_HAS_HDMI1 */
+ };
+};
+
+&rpc {
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash at 0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam at 0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2 at 40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6 at 180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31 at 1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee at 200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot at 640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb at 740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel at 7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user at 1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
};
};
};
@@ -787,6 +925,12 @@
status = "okay";
};
+#ifdef SOC_HAS_SATA
+&sata {
+ status = "okay";
+};
+#endif /* SOC_HAS_SATA */
+
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
@@ -833,8 +977,11 @@
bus-width = <8>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ no-sd;
+ no-sdio;
non-removable;
fixed-emmc-driver-type = <1>;
+ full-pwr-cycle-in-suspend;
status = "okay";
};
@@ -931,3 +1078,27 @@
status = "okay";
};
+
+#ifdef SOC_HAS_USB2_CH2
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&pfc {
+ usb2_pins: usb2 {
+ groups = "usb2";
+ function = "usb2";
+ };
+};
+
+&usb2_phy2 {
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH2 */
diff --git a/arch/arm/dts/salvator-xs.dtsi b/arch/arm/dts/salvator-xs.dtsi
index 717d42758cb..08b925624e1 100644
--- a/arch/arm/dts/salvator-xs.dtsi
+++ b/arch/arm/dts/salvator-xs.dtsi
@@ -27,3 +27,59 @@
clock-names = "xin";
};
};
+
+#ifdef SOC_HAS_SATA
+&pca9654 {
+ pcie-sata-switch-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+#endif /* SOC_HAS_SATA */
+
+#ifdef SOC_HAS_USB2_CH3
+&ehci3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&hsusb3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&ohci3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pfc {
+ /*
+ * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
+ * (when SW31 is the default setting on Salvator-XS).
+ * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
+ * r8a77951 with Salvator-XS.
+ * Hence the SW31 setting must be changed like 2) below.
+ * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
+ * - Connect GP6_3[01] to ADV7842.
+ * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
+ * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
+ * - Connect GP6_{04,21} to ADV7842.
+ */
+ usb2_ch3_pins: usb2_ch3 {
+ groups = "usb2_ch3";
+ function = "usb2_ch3";
+ };
+};
+
+&usb2_phy3 {
+ pinctrl-0 = <&usb2_ch3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH3 */
diff --git a/arch/arm/dts/ulcb-audio-graph-card.dtsi b/arch/arm/dts/ulcb-audio-graph-card.dtsi
new file mode 100644
index 00000000000..3be54df645e
--- /dev/null
+++ b/arch/arm/dts/ulcb-audio-graph-card.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * (A) CPU0 <-----> ak4613
+ * (B) CPU1 -----> HDMI
+ *
+ * (A) aplay -D plughw:0,0 xxx.wav
+ * (B) aplay -D plughw:0,1 xxx.wav
+ *
+ * (A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+ sound_card: sound {
+ compatible = "audio-graph-card";
+ label = "rcar-sound";
+
+ dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+ &rsnd_port1 /* (B) CPU1 -> HDMI */
+ >;
+ };
+};
+
+&ak4613 {
+ #sound-dai-cells = <0>;
+
+ port {
+ /*
+ * (A) CPU0 <-> ak4613
+ */
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_for_ak4613>;
+ };
+ };
+};
+
+&hdmi0 {
+ ports {
+ port at 2 {
+ /*
+ * (B) CPU1 -> HDMI
+ */
+ dw_hdmi0_snd_in: endpoint {
+ remote-endpoint = <&rsnd_for_hdmi>;
+ };
+ };
+ };
+};
+
+&rcar_sound {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rsnd_port0: port at 0 {
+ /*
+ * (A) CPU0 <-> ak4613
+ */
+ reg = <0>;
+ rsnd_for_ak4613: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+ bitclock-master;
+ frame-master;
+ playback = <&ssi0>, <&src0>, <&dvc0>;
+ capture = <&ssi1>, <&src1>, <&dvc1>;
+ };
+ };
+ rsnd_port1: port at 1 {
+ /*
+ * (B) CPU1 -> HDMI
+ */
+ reg = <1>;
+ rsnd_for_hdmi: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+ bitclock-master;
+ frame-master;
+ playback = <&ssi2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/ulcb-audio-graph-card2.dtsi b/arch/arm/dts/ulcb-audio-graph-card2.dtsi
new file mode 100644
index 00000000000..5ebec123584
--- /dev/null
+++ b/arch/arm/dts/ulcb-audio-graph-card2.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card2
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * (A) CPU0 <----> ak4613
+ * (B) CPU1 ----> HDMI
+ *
+ * (A) aplay -D plughw:0,0 xxx.wav
+ * (B) aplay -D plughw:0,1 xxx.wav
+ *
+ * (A) arecord -D plughw:0,0 xxx.wav
+ */
+#include "ulcb-audio-graph-card.dtsi"
+
+&sound_card {
+ compatible = "audio-graph-card2";
+
+ /delete-property/ dais;
+ links = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+ &rsnd_port1 /* (B) CPU1 -> HDMI */
+ >;
+};
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index 29cedf4dc1a..0be2716659e 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -6,14 +6,6 @@
* Copyright (C) 2016 Cogent Embedded, Inc.
*/
-/*
- * SSI-AK4613
- * aplay -D plughw:0,0 xxx.wav
- * arecord -D plughw:0,0 xxx.wav
- * SSI-HDMI
- * aplay -D plughw:0,1 xxx.wav
- */
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -102,15 +94,6 @@
regulator-always-on;
};
- sound_card: sound {
- compatible = "audio-graph-card2";
- label = "rcar-sound";
-
- links = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- >;
- };
-
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -201,9 +184,6 @@
};
port at 2 {
reg = <2>;
- dw_hdmi0_snd_in: endpoint {
- remote-endpoint = <&rsnd_for_hdmi>;
- };
};
};
};
@@ -218,7 +198,6 @@
ak4613: codec at 10 {
compatible = "asahi-kasei,ak4613";
- #sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
@@ -230,12 +209,6 @@
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
-
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_for_ak4613>;
- };
- };
};
cs2000: clk-multiplier at 4f {
@@ -294,6 +267,12 @@
};
};
};
+
+ eeprom at 50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&ohci1 {
@@ -381,9 +360,6 @@
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
- /* Single DAI */
- #sound-dai-cells = <0>;
-
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
@@ -408,30 +384,6 @@
<&audio_clk_a>, <&cs2000>,
<&audio_clk_c>,
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_port0: port at 0 {
- reg = <0>;
- rsnd_for_ak4613: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- bitclock-master;
- frame-master;
- playback = <&ssi0>, <&src0>, <&dvc0>;
- capture = <&ssi1>, <&src1>, <&dvc1>;
- };
- };
- rsnd_port1: port at 1 {
- reg = <1>;
- rsnd_for_hdmi: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- bitclock-master;
- frame-master;
- playback = <&ssi2>;
- };
- };
- };
};
&rpc {
@@ -541,3 +493,17 @@
status = "okay";
};
+
+
+/*
+ * For sound-test.
+ *
+ * We can switch Audio Card for testing
+ *
+ * #include "ulcb-simple-audio-card.dtsi"
+ * #include "ulcb-simple-audio-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card.dtsi"
+ * #include "ulcb-audio-graph-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card2-mix+split.dtsi"
+ */
+#include "ulcb-audio-graph-card2.dtsi"
--
2.40.1
More information about the U-Boot
mailing list