[PATCH v3 01/13] scmi: refactor the code to hide a channel from devices
AKASHI Takahiro
takahiro.akashi at linaro.org
Mon Sep 11 08:43:59 CEST 2023
Hi Etienne,
Thank you gain for your review.
On Fri, Sep 08, 2023 at 02:01:51PM +0000, Etienne CARRIERE wrote:
> Hello Akashi-san,
>
> >
> > From: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > Sent: Friday, September 8, 2023 04:51
> >
> > The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel
> > reference") added an explicit parameter, channel, but it seems to make
> > the code complex.
> >
> > Hiding this parameter will allow for adding a generic (protocol-agnostic)
> > helper function, i.e. for PROTOCOL_VERSION, in a later patch.
> >
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > Reviewed-by: Simon Glass <sjg at chromium.org>
> > ---
> > v3
> > * fix an issue on ST board (reported by Etienne)
> > by taking care of cases where probed devices are children of
> > SCMI protocol device (i.e. clock devices under CCF)
> > See find_scmi_protocol_device().
> > * move "per_device_plato_auto" to a succeeding right patch
> > v2
> > * new patch
> > ---
> > drivers/clk/clk_scmi.c | 27 +---
> > drivers/firmware/scmi/scmi_agent-uclass.c | 160 +++++++++++-----------
> > drivers/power/regulator/scmi_regulator.c | 27 +---
> > drivers/reset/reset-scmi.c | 19 +--
> > include/scmi_agent.h | 15 +-
> > 5 files changed, 103 insertions(+), 145 deletions(-)
> >
> > diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
> > index d172fed24c9d..34a49363a51a 100644
> > --- a/drivers/clk/clk_scmi.c
> > +++ b/drivers/clk/clk_scmi.c
> > @@ -13,17 +13,8 @@
> > #include <asm/types.h>
> > #include <linux/clk-provider.h>
> >
> > -/**
> > - * struct scmi_clk_priv - Private data for SCMI clocks
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_clk_priv {
> > - struct scmi_channel *channel;
> > -};
> > -
> > static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(dev);
> > struct scmi_clk_protocol_attr_out out;
> > struct scmi_msg msg = {
> > .protocol_id = SCMI_PROTOCOL_ID_CLOCK,
> > @@ -33,7 +24,7 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> > };
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -44,7 +35,6 @@ static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
> >
> > static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(dev);
> > struct scmi_clk_attribute_in in = {
> > .clock_id = clkid,
> > };
> > @@ -59,7 +49,7 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> > };
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -70,7 +60,6 @@ static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
> >
> > static int scmi_clk_gate(struct clk *clk, int enable)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> > struct scmi_clk_state_in in = {
> > .clock_id = clk->id,
> > .attributes = enable,
> > @@ -81,7 +70,7 @@ static int scmi_clk_gate(struct clk *clk, int enable)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(clk->dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -100,7 +89,6 @@ static int scmi_clk_disable(struct clk *clk)
> >
> > static ulong scmi_clk_get_rate(struct clk *clk)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> > struct scmi_clk_rate_get_in in = {
> > .clock_id = clk->id,
> > };
> > @@ -110,7 +98,7 @@ static ulong scmi_clk_get_rate(struct clk *clk)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(clk->dev, &msg);
> > if (ret < 0)
> > return ret;
> >
> > @@ -123,7 +111,6 @@ static ulong scmi_clk_get_rate(struct clk *clk)
> >
> > static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(clk->dev);
> > struct scmi_clk_rate_set_in in = {
> > .clock_id = clk->id,
> > .flags = SCMI_CLK_RATE_ROUND_CLOSEST,
> > @@ -136,7 +123,7 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(clk->dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(clk->dev, &msg);
> > if (ret < 0)
> > return ret;
> >
> > @@ -149,12 +136,11 @@ static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
> >
> > static int scmi_clk_probe(struct udevice *dev)
> > {
> > - struct scmi_clk_priv *priv = dev_get_priv(dev);
> > struct clk *clk;
> > size_t num_clocks, i;
> > int ret;
> >
> > - ret = devm_scmi_of_get_channel(dev, &priv->channel);
> > + ret = devm_scmi_of_get_channel(dev);
> > if (ret)
> > return ret;
> >
> > @@ -205,5 +191,4 @@ U_BOOT_DRIVER(scmi_clock) = {
> > .id = UCLASS_CLK,
> > .ops = &scmi_clk_ops,
> > .probe = scmi_clk_probe,
> > - .priv_auto = sizeof(struct scmi_clk_priv *),
> > };
> > diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
> > index 02de692d66f3..feb31809e715 100644
> > --- a/drivers/firmware/scmi/scmi_agent-uclass.c
> > +++ b/drivers/firmware/scmi/scmi_agent-uclass.c
> > @@ -8,6 +8,7 @@
> > #include <common.h>
> > #include <dm.h>
> > #include <errno.h>
> > +#include <scmi_agent.h>
> > #include <scmi_agent-uclass.h>
> > #include <scmi_protocols.h>
> > #include <dm/device_compat.h>
> > @@ -51,77 +52,23 @@ int scmi_to_linux_errno(s32 scmi_code)
> > return -EPROTO;
> > }
> >
> > -/*
> > - * SCMI agent devices binds devices of various uclasses depeding on
> > - * the FDT description. scmi_bind_protocol() is a generic bind sequence
> > - * called by the uclass at bind stage, that is uclass post_bind.
> > - */
> > -static int scmi_bind_protocols(struct udevice *dev)
>
> This patch removes function scmi_bind_protocols() whereas it should
> be removed (actually moved) from patch PATCH v3 03/13
> ("firmware: scmi: move scmi_bind_protocols() backward").
You're right. I accidentally remove the function in refactoring.
It will be restored again here to keep 03/13 correct.
>
> > +static struct udevice *find_scmi_protocol_device(struct udevice *dev)
> > {
> > - int ret = 0;
> > - ofnode node;
> > - const char *name;
> > -
> > - dev_for_each_subnode(node, dev) {
> > - struct driver *drv = NULL;
> > - u32 protocol_id;
> > -
> > - if (!ofnode_is_enabled(node))
> > - continue;
> > -
> > - if (ofnode_read_u32(node, "reg", &protocol_id))
> > - continue;
> > + struct udevice *parent = NULL, *protocol;
> >
> > - name = ofnode_get_name(node);
> > - switch (protocol_id) {
> > - case SCMI_PROTOCOL_ID_CLOCK:
> > - if (CONFIG_IS_ENABLED(CLK_SCMI))
> > - drv = DM_DRIVER_GET(scmi_clock);
> > - break;
> > - case SCMI_PROTOCOL_ID_RESET_DOMAIN:
> > - if (IS_ENABLED(CONFIG_RESET_SCMI))
> > - drv = DM_DRIVER_GET(scmi_reset_domain);
> > - break;
> > - case SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN:
> > - if (IS_ENABLED(CONFIG_DM_REGULATOR_SCMI)) {
> > - node = ofnode_find_subnode(node, "regulators");
> > - if (!ofnode_valid(node)) {
> > - dev_err(dev, "no regulators node\n");
> > - return -ENXIO;
> > - }
> > - drv = DM_DRIVER_GET(scmi_voltage_domain);
> > - }
> > - break;
> > - default:
> > - break;
> > - }
> > -
> > - if (!drv) {
> > - dev_dbg(dev, "Ignore unsupported SCMI protocol %#x\n",
> > - protocol_id);
> > - continue;
> > - }
> > -
> > - ret = device_bind(dev, drv, name, NULL, node, NULL);
> > - if (ret)
> > + for (protocol = dev; protocol; protocol = parent) {
> > + parent = dev_get_parent(protocol);
> > + if (!parent ||
> > + device_get_uclass_id(parent) == UCLASS_SCMI_AGENT)
> > break;
> > }
> >
> > - return ret;
> > -}
> > -
> > -static struct udevice *find_scmi_transport_device(struct udevice *dev)
> > -{
> > - struct udevice *parent = dev;
> > -
> > - do {
> > - parent = dev_get_parent(parent);
> > - } while (parent && device_get_uclass_id(parent) != UCLASS_SCMI_AGENT);
> > -
> > - if (!parent)
> > + if (!parent) {
> > dev_err(dev, "Invalid SCMI device, agent not found\n");
> > + return NULL;
> > + }
> >
> > - return parent;
> > + return protocol;
> > }
> >
> > static const struct scmi_agent_ops *transport_dev_ops(struct udevice *dev)
> > @@ -129,43 +76,90 @@ static const struct scmi_agent_ops *transport_dev_ops(struct udevice *dev)
> > return (const struct scmi_agent_ops *)dev->driver->ops;
> > }
> >
> > -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> > +/**
> > + * scmi_of_get_channel() - Get SCMI channel handle
> > + *
> > + * @dev: SCMI agent device
> > + * @channel: Output reference to the SCMI channel upon success
> > + *
> > + * On return, @channel will be set.
> > + * Return 0 on success and a negative errno on failure
> > + */
> > +static int scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> > {
> > - struct udevice *parent;
> > + const struct scmi_agent_ops *ops;
> >
> > - parent = find_scmi_transport_device(dev);
> > - if (!parent)
> > + ops = transport_dev_ops(dev);
> > + if (ops->of_get_channel)
> > + return ops->of_get_channel(dev, channel);
> > + else
> > + return -EPROTONOSUPPORT;
> > +}
> > +
> > +int devm_scmi_of_get_channel(struct udevice *dev)
> > +{
> > + struct udevice *protocol;
> > + struct scmi_agent_proto_priv *priv;
> > + int ret;
> > +
> > + protocol = find_scmi_protocol_device(dev);
> > + if (!protocol)
> > return -ENODEV;
> >
> > - if (transport_dev_ops(parent)->of_get_channel)
> > - return transport_dev_ops(parent)->of_get_channel(parent, channel);
> > + priv = dev_get_parent_priv(protocol);
> > + ret = scmi_of_get_channel(protocol->parent, &priv->channel);
> > + if (ret == -EPROTONOSUPPORT) {
> > + /* Drivers without a get_channel operator don't need a channel ref */
> > + priv->channel = NULL;
> >
> > - /* Drivers without a get_channel operator don't need a channel ref */
> > - *channel = NULL;
> > + return 0;
> > + }
> >
> > - return 0;
> > + return ret;
> > }
> >
> > -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > - struct scmi_msg *msg)
> > +/**
> > + * scmi_process_msg() - Send and process an SCMI message
> > + *
> > + * Send a message to an SCMI server.
> > + * Caller sets scmi_msg::out_msg_sz to the output message buffer size.
> > + *
> > + * @dev: SCMI agent device
> > + * @channel: Communication channel for the device
> > + * @msg: Message structure reference
> > + *
> > + * On return, scmi_msg::out_msg_sz stores the response payload size.
> > + * Return: 0 on success and a negative errno on failure
> > + */
> > +static int scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > + struct scmi_msg *msg)
> > {
> > const struct scmi_agent_ops *ops;
> > - struct udevice *parent;
> >
> > - parent = find_scmi_transport_device(dev);
> > - if (!parent)
> > - return -ENODEV;
> > + ops = transport_dev_ops(dev);
> > + if (ops->process_msg)
> > + return ops->process_msg(dev, channel, msg);
> > + else
> > + return -EPROTONOSUPPORT;
> > +}
> >
> > - ops = transport_dev_ops(parent);
> > +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg)
> > +{
> > + struct udevice *protocol;
> > + struct scmi_agent_proto_priv *priv;
> >
> > - if (ops->process_msg)
> > - return ops->process_msg(parent, channel, msg);
> > + protocol = find_scmi_protocol_device(dev);
> > + if (!protocol)
> > + return -ENODEV;
> > +
> > + priv = dev_get_parent_priv(protocol);
> >
> > - return -EPROTONOSUPPORT;
> > + return scmi_process_msg(protocol->parent, priv->channel, msg);
> > }
> >
> > UCLASS_DRIVER(scmi_agent) = {
> > .id = UCLASS_SCMI_AGENT,
> > .name = "scmi_agent",
> > .post_bind = scmi_bind_protocols,
> > + .per_child_auto = sizeof(struct scmi_agent_proto_priv *),
> > };
> > diff --git a/drivers/power/regulator/scmi_regulator.c b/drivers/power/regulator/scmi_regulator.c
> > index 801148036ff6..08918b20872c 100644
> > --- a/drivers/power/regulator/scmi_regulator.c
> > +++ b/drivers/power/regulator/scmi_regulator.c
> > @@ -25,18 +25,9 @@ struct scmi_regulator_platdata {
> > u32 domain_id;
> > };
> >
> > -/**
> > - * struct scmi_regulator_priv - Private data for SCMI voltage regulator
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_regulator_priv {
> > - struct scmi_channel *channel;
> > -};
> > -
> > static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> > {
> > struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> > struct scmi_voltd_config_set_in in = {
> > .domain_id = pdata->domain_id,
> > .config = enable ? SCMI_VOLTD_CONFIG_ON : SCMI_VOLTD_CONFIG_OFF,
> > @@ -47,7 +38,7 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -57,7 +48,6 @@ static int scmi_voltd_set_enable(struct udevice *dev, bool enable)
> > static int scmi_voltd_get_enable(struct udevice *dev)
> > {
> > struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> > struct scmi_voltd_config_get_in in = {
> > .domain_id = pdata->domain_id,
> > };
> > @@ -67,7 +57,7 @@ static int scmi_voltd_get_enable(struct udevice *dev)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret < 0)
> > return ret;
> >
> > @@ -80,7 +70,6 @@ static int scmi_voltd_get_enable(struct udevice *dev)
> >
> > static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> > {
> > - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> > struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > struct scmi_voltd_level_set_in in = {
> > .domain_id = pdata->domain_id,
> > @@ -92,7 +81,7 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret < 0)
> > return ret;
> >
> > @@ -101,7 +90,6 @@ static int scmi_voltd_set_voltage_level(struct udevice *dev, int uV)
> >
> > static int scmi_voltd_get_voltage_level(struct udevice *dev)
> > {
> > - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> > struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > struct scmi_voltd_level_get_in in = {
> > .domain_id = pdata->domain_id,
> > @@ -112,7 +100,7 @@ static int scmi_voltd_get_voltage_level(struct udevice *dev)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(dev, &msg);
> > if (ret < 0)
> > return ret;
> >
> > @@ -140,7 +128,6 @@ static int scmi_regulator_of_to_plat(struct udevice *dev)
> > static int scmi_regulator_probe(struct udevice *dev)
> > {
> > struct scmi_regulator_platdata *pdata = dev_get_plat(dev);
> > - struct scmi_regulator_priv *priv = dev_get_priv(dev);
> > struct scmi_voltd_attr_in in = { 0 };
> > struct scmi_voltd_attr_out out = { 0 };
> > struct scmi_msg scmi_msg = {
> > @@ -153,14 +140,14 @@ static int scmi_regulator_probe(struct udevice *dev)
> > };
> > int ret;
> >
> > - ret = devm_scmi_of_get_channel(dev->parent, &priv->channel);
> > + ret = devm_scmi_of_get_channel(dev);
> > if (ret)
> > return ret;
> >
> > /* Check voltage domain is known from SCMI server */
> > in.domain_id = pdata->domain_id;
> >
> > - ret = devm_scmi_process_msg(dev, priv->channel, &scmi_msg);
> > + ret = devm_scmi_process_msg(dev, &scmi_msg);
> > if (ret) {
> > dev_err(dev, "Failed to query voltage domain %u: %d\n",
> > pdata->domain_id, ret);
> > @@ -184,7 +171,6 @@ U_BOOT_DRIVER(scmi_regulator) = {
> > .probe = scmi_regulator_probe,
> > .of_to_plat = scmi_regulator_of_to_plat,
> > .plat_auto = sizeof(struct scmi_regulator_platdata),
> > - .priv_auto = sizeof(struct scmi_regulator_priv *),
> > };
> >
> > static int scmi_regulator_bind(struct udevice *dev)
> > @@ -209,4 +195,5 @@ U_BOOT_DRIVER(scmi_voltage_domain) = {
> > .name = "scmi_voltage_domain",
> > .id = UCLASS_NOP,
> > .bind = scmi_regulator_bind,
> > + .per_child_auto = sizeof(struct scmi_agent_proto_priv *),
>
> I think this line is not needed. agent protocols private data is allocated
> from .per_child_auto field set in scmi_agent-uclass.c above in this patch.
Yes, I will delete it.
-Takahiro Akashi
>
>
> > };
> > diff --git a/drivers/reset/reset-scmi.c b/drivers/reset/reset-scmi.c
> > index 122556162ec3..b76711f0a8fb 100644
> > --- a/drivers/reset/reset-scmi.c
> > +++ b/drivers/reset/reset-scmi.c
> > @@ -13,17 +13,8 @@
> > #include <scmi_protocols.h>
> > #include <asm/types.h>
> >
> > -/**
> > - * struct scmi_reset_priv - Private data for SCMI reset controller
> > - * @channel: Reference to the SCMI channel to use
> > - */
> > -struct scmi_reset_priv {
> > - struct scmi_channel *channel;
> > -};
> > -
> > static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> > {
> > - struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> > struct scmi_rd_reset_in in = {
> > .domain_id = rst->id,
> > .flags = assert_not_deassert ? SCMI_RD_RESET_FLAG_ASSERT : 0,
> > @@ -35,7 +26,7 @@ static int scmi_reset_set_level(struct reset_ctl *rst, bool assert_not_deassert)
> > in, out);
> > int ret;
> >
> > - ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(rst->dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -54,7 +45,6 @@ static int scmi_reset_deassert(struct reset_ctl *rst)
> >
> > static int scmi_reset_request(struct reset_ctl *rst)
> > {
> > - struct scmi_reset_priv *priv = dev_get_priv(rst->dev);
> > struct scmi_rd_attr_in in = {
> > .domain_id = rst->id,
> > };
> > @@ -68,7 +58,7 @@ static int scmi_reset_request(struct reset_ctl *rst)
> > * We don't really care about the attribute, just check
> > * the reset domain exists.
> > */
> > - ret = devm_scmi_process_msg(rst->dev, priv->channel, &msg);
> > + ret = devm_scmi_process_msg(rst->dev, &msg);
> > if (ret)
> > return ret;
> >
> > @@ -83,9 +73,7 @@ static const struct reset_ops scmi_reset_domain_ops = {
> >
> > static int scmi_reset_probe(struct udevice *dev)
> > {
> > - struct scmi_reset_priv *priv = dev_get_priv(dev);
> > -
> > - return devm_scmi_of_get_channel(dev, &priv->channel);
> > + return devm_scmi_of_get_channel(dev);
> > }
> >
> > U_BOOT_DRIVER(scmi_reset_domain) = {
> > @@ -93,5 +81,4 @@ U_BOOT_DRIVER(scmi_reset_domain) = {
> > .id = UCLASS_RESET,
> > .ops = &scmi_reset_domain_ops,
> > .probe = scmi_reset_probe,
> > - .priv_auto = sizeof(struct scmi_reset_priv *),
> > };
> > diff --git a/include/scmi_agent.h b/include/scmi_agent.h
> > index ee6286366df7..577892029ff8 100644
> > --- a/include/scmi_agent.h
> > +++ b/include/scmi_agent.h
> > @@ -15,6 +15,14 @@
> > struct udevice;
> > struct scmi_channel;
> >
> > +/**
> > + * struct scmi_agent_proto_priv - Private data in device for SCMI agent
> > + * @channel: Reference to the SCMI channel to use
> > + */
> > +struct scmi_agent_proto_priv {
> > + struct scmi_channel *channel;
> > +};
> > +
> > /*
> > * struct scmi_msg - Context of a SCMI message sent and the response received
> > *
> > @@ -49,10 +57,9 @@ struct scmi_msg {
> > * devm_scmi_of_get_channel() - Get SCMI channel handle from SCMI agent DT node
> > *
> > * @dev: Device requesting a channel
> > - * @channel: Output reference to the SCMI channel upon success
> > * @return 0 on success and a negative errno on failure
> > */
> > -int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel);
> > +int devm_scmi_of_get_channel(struct udevice *dev);
> >
> > /**
> > * devm_scmi_process_msg() - Send and process an SCMI message
> > @@ -62,12 +69,10 @@ int devm_scmi_of_get_channel(struct udevice *dev, struct scmi_channel **channel)
> > * On return, scmi_msg::out_msg_sz stores the response payload size.
> > *
> > * @dev: SCMI device
> > - * @channel: Communication channel for the device
> > * @msg: Message structure reference
> > * Return: 0 on success and a negative errno on failure
> > */
> > -int devm_scmi_process_msg(struct udevice *dev, struct scmi_channel *channel,
> > - struct scmi_msg *msg);
> > +int devm_scmi_process_msg(struct udevice *dev, struct scmi_msg *msg);
> >
> > /**
> > * scmi_to_linux_errno() - Convert an SCMI error code into a Linux errno code
> > --
> > 2.34.1
> >
More information about the U-Boot
mailing list