[PATCH v5 14/16] cmd: add scmi command for SCMI firmware
AKASHI Takahiro
takahiro.akashi at linaro.org
Tue Sep 26 08:57:48 CEST 2023
This command, "scmi", may provide a command line interface to various SCMI
protocols. It supports at least initially SCMI base protocol and is
intended mainly for debug purpose.
Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere at foss.st.com>
---
v3
* describe that arguments are in hex at a help message
* modify the code for dynamically allocated agent names
v2
* remove sub command category, 'scmi base', for simplicity
---
cmd/Kconfig | 9 ++
cmd/Makefile | 1 +
cmd/scmi.c | 337 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 347 insertions(+)
create mode 100644 cmd/scmi.c
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 43ca10f69ccf..f46152ace7d8 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -2533,6 +2533,15 @@ config CMD_CROS_EC
a number of sub-commands for performing EC tasks such as
updating its flash, accessing a small saved context area
and talking to the I2C bus behind the EC (if there is one).
+
+config CMD_SCMI
+ bool "Enable scmi command"
+ depends on SCMI_FIRMWARE
+ default n
+ help
+ This command provides user interfaces to several SCMI (System
+ Control and Management Interface) protocols available on Arm
+ platforms to manage system resources.
endmenu
menu "Filesystem commands"
diff --git a/cmd/Makefile b/cmd/Makefile
index 9bebf321c397..ad3810b17e93 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -158,6 +158,7 @@ obj-$(CONFIG_CMD_SATA) += sata.o
obj-$(CONFIG_CMD_NVME) += nvme.o
obj-$(CONFIG_SANDBOX) += sb.o
obj-$(CONFIG_CMD_SF) += sf.o
+obj-$(CONFIG_CMD_SCMI) += scmi.o
obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SEAMA) += seama.o
diff --git a/cmd/scmi.c b/cmd/scmi.c
new file mode 100644
index 000000000000..5efec8ad87fd
--- /dev/null
+++ b/cmd/scmi.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SCMI (System Control and Management Interface) utility command
+ *
+ * Copyright (c) 2023 Linaro Limited
+ * Author: AKASHI Takahiro
+ */
+
+#include <common.h>
+#include <command.h>
+#include <exports.h>
+#include <scmi_agent.h>
+#include <scmi_agent-uclass.h>
+#include <stdlib.h>
+#include <asm/types.h>
+#include <dm/device.h>
+#include <dm/uclass.h> /* uclass_get_device */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+
+static struct udevice *agent;
+static struct udevice *base_proto;
+
+struct {
+ enum scmi_std_protocol id;
+ const char *name;
+} protocol_name[] = {
+ {SCMI_PROTOCOL_ID_BASE, "Base"},
+ {SCMI_PROTOCOL_ID_POWER_DOMAIN, "Power domain management"},
+ {SCMI_PROTOCOL_ID_SYSTEM, "System power management"},
+ {SCMI_PROTOCOL_ID_PERF, "Performance domain management"},
+ {SCMI_PROTOCOL_ID_CLOCK, "Clock management"},
+ {SCMI_PROTOCOL_ID_SENSOR, "Sensor management"},
+ {SCMI_PROTOCOL_ID_RESET_DOMAIN, "Reset domain management"},
+ {SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN, "Voltage domain management"},
+};
+
+/**
+ * get_proto_name() - get the name of SCMI protocol
+ *
+ * @id: SCMI Protocol ID
+ *
+ * Get the printable name of the protocol, @id
+ *
+ * Return: Name string on success, NULL on failure
+ */
+static const char *get_proto_name(enum scmi_std_protocol id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(protocol_name); i++)
+ if (id == protocol_name[i].id)
+ return protocol_name[i].name;
+
+ return NULL;
+}
+
+/**
+ * do_scmi_info() - get the information of SCMI services
+ *
+ * @cmdtp: Command table
+ * @flag: Command flag
+ * @argc: Number of arguments
+ * @argv: Argument array
+ *
+ * Get the information of SCMI services using various interfaces
+ * provided by the Base protocol.
+ *
+ * Return: CMD_RET_SUCCESS on success, CMD_RET_RET_FAILURE on failure
+ */
+static int do_scmi_info(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 agent_id, num_protocols;
+ u8 *agent_name, *protocols;
+ int i, ret;
+
+ if (argc != 1)
+ return CMD_RET_USAGE;
+
+ printf("SCMI device: %s\n", agent->name);
+ printf(" protocol version: 0x%x\n", scmi_version(agent));
+ printf(" # of agents: %d\n", scmi_num_agents(agent));
+ for (i = 0; i < scmi_num_agents(agent); i++) {
+ ret = scmi_base_discover_agent(base_proto, i, &agent_id,
+ &agent_name);
+ if (ret) {
+ if (ret != -EOPNOTSUPP)
+ printf("base_discover_agent() failed for id: %d (%d)\n",
+ i, ret);
+ break;
+ }
+ printf(" %c%2d: %s\n", i == scmi_agent_id(agent) ? '>' : ' ',
+ i, agent_name);
+ free(agent_name);
+ }
+ printf(" # of protocols: %d\n", scmi_num_protocols(agent));
+ num_protocols = scmi_num_protocols(agent);
+ protocols = scmi_protocols(agent);
+ if (protocols)
+ for (i = 0; i < num_protocols; i++)
+ printf(" %s\n", get_proto_name(protocols[i]));
+ printf(" vendor: %s\n", scmi_vendor(agent));
+ printf(" sub vendor: %s\n", scmi_sub_vendor(agent));
+ printf(" impl version: 0x%x\n", scmi_impl_version(agent));
+
+ return CMD_RET_SUCCESS;
+}
+
+/**
+ * do_scmi_set_dev() - set access permission to device
+ *
+ * @cmdtp: Command table
+ * @flag: Command flag
+ * @argc: Number of arguments
+ * @argv: Argument array
+ *
+ * Set access permission to device with SCMI_BASE_SET_DEVICE_PERMISSIONS
+ *
+ * Return: CMD_RET_SUCCESS on success, CMD_RET_RET_FAILURE on failure
+ */
+static int do_scmi_set_dev(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 agent_id, device_id, flags, attributes;
+ char *end;
+ int ret;
+
+ if (argc != 4)
+ return CMD_RET_USAGE;
+
+ agent_id = simple_strtoul(argv[1], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ device_id = simple_strtoul(argv[2], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ flags = simple_strtoul(argv[3], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ ret = scmi_base_protocol_message_attrs(base_proto,
+ SCMI_BASE_SET_DEVICE_PERMISSIONS,
+ &attributes);
+ if (ret) {
+ printf("This operation is not supported\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = scmi_base_set_device_permissions(base_proto, agent_id,
+ device_id, flags);
+ if (ret) {
+ printf("%s access to device:%u failed (%d)\n",
+ flags ? "Allowing" : "Denying", device_id, ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+/**
+ * do_scmi_set_proto() - set protocol permission to device
+ *
+ * @cmdtp: Command table
+ * @flag: Command flag
+ * @argc: Number of arguments
+ * @argv: Argument array
+ *
+ * Set protocol permission to device with SCMI_BASE_SET_PROTOCOL_PERMISSIONS
+ *
+ * Return: CMD_RET_SUCCESS on success, CMD_RET_RET_FAILURE on failure
+ */
+static int do_scmi_set_proto(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 agent_id, device_id, protocol_id, flags, attributes;
+ char *end;
+ int ret;
+
+ if (argc != 5)
+ return CMD_RET_USAGE;
+
+ agent_id = simple_strtoul(argv[1], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ device_id = simple_strtoul(argv[2], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ protocol_id = simple_strtoul(argv[3], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ flags = simple_strtoul(argv[4], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ ret = scmi_base_protocol_message_attrs(base_proto,
+ SCMI_BASE_SET_PROTOCOL_PERMISSIONS,
+ &attributes);
+ if (ret) {
+ printf("This operation is not supported\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = scmi_base_set_protocol_permissions(base_proto, agent_id,
+ device_id, protocol_id,
+ flags);
+ if (ret) {
+ printf("%s access to protocol:0x%x on device:%u failed (%d)\n",
+ flags ? "Allowing" : "Denying", protocol_id, device_id,
+ ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+/**
+ * do_scmi_reset() - reset platform resource settings
+ *
+ * @cmdtp: Command table
+ * @flag: Command flag
+ * @argc: Number of arguments
+ * @argv: Argument array
+ *
+ * Reset platform resource settings with BASE_RESET_AGENT_CONFIGURATION
+ *
+ * Return: CMD_RET_SUCCESS on success, CMD_RET_RET_FAILURE on failure
+ */
+static int do_scmi_reset(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ u32 agent_id, flags, attributes;
+ char *end;
+ int ret;
+
+ if (argc != 3)
+ return CMD_RET_USAGE;
+
+ agent_id = simple_strtoul(argv[1], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ flags = simple_strtoul(argv[2], &end, 16);
+ if (*end != '\0')
+ return CMD_RET_USAGE;
+
+ ret = scmi_base_protocol_message_attrs(base_proto,
+ SCMI_BASE_RESET_AGENT_CONFIGURATION,
+ &attributes);
+ if (ret) {
+ printf("Reset is not supported\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = scmi_base_reset_agent_configuration(base_proto, agent_id, flags);
+ if (ret) {
+ printf("Reset failed (%d)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static struct cmd_tbl cmd_scmi_sub[] = {
+ U_BOOT_CMD_MKENT(info, CONFIG_SYS_MAXARGS, 1,
+ do_scmi_info, "", ""),
+ U_BOOT_CMD_MKENT(perm_dev, CONFIG_SYS_MAXARGS, 1,
+ do_scmi_set_dev, "", ""),
+ U_BOOT_CMD_MKENT(perm_proto, CONFIG_SYS_MAXARGS, 1,
+ do_scmi_set_proto, "", ""),
+ U_BOOT_CMD_MKENT(reset, CONFIG_SYS_MAXARGS, 1,
+ do_scmi_reset, "", ""),
+};
+
+/**
+ * do_scmi() - SCMI utility
+ *
+ * @cmdtp: Command table
+ * @flag: Command flag
+ * @argc: Number of arguments
+ * @argv: Argument array
+ *
+ * Provide user interfaces to SCMI protocols.
+ *
+ * Return: CMD_RET_SUCCESS on success,
+ * CMD_RET_USAGE or CMD_RET_RET_FAILURE on failure
+ */
+static int do_scmi(struct cmd_tbl *cmdtp, int flag,
+ int argc, char *const argv[])
+{
+ struct cmd_tbl *cp;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ argc--; argv++;
+
+ if (!agent) {
+ if (uclass_get_device(UCLASS_SCMI_AGENT, 0, &agent)) {
+ printf("Cannot find any SCMI agent\n");
+ return CMD_RET_FAILURE;
+ }
+ }
+
+ if (!base_proto)
+ base_proto = scmi_get_protocol(agent, SCMI_PROTOCOL_ID_BASE);
+ if (!base_proto) {
+ printf("SCMI base protocol not found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ cp = find_cmd_tbl(argv[0], cmd_scmi_sub, ARRAY_SIZE(cmd_scmi_sub));
+ if (!cp)
+ return CMD_RET_USAGE;
+
+ return cp->cmd(cmdtp, flag, argc, argv);
+}
+
+static char scmi_help_text[] =
+ " - SCMI utility\n"
+ " info - get the info of SCMI services\n"
+ " perm_dev <agent-id in hex> <device-id in hex> <flags in hex>\n"
+ " - set access permission to device\n"
+ " perm_proto <agent-id in hex> <device-id in hex> <protocol-id in hex>"
+ " <flags in hex>\n"
+ " - set protocol permission to device\n"
+ " reset <agent-id in hex> <flags in hex>\n"
+ " - reset platform resource settings\n"
+ "";
+
+U_BOOT_CMD(scmi, CONFIG_SYS_MAXARGS, 0, do_scmi, "SCMI utility",
+ scmi_help_text);
--
2.34.1
More information about the U-Boot
mailing list