[PATCH] imx8mp: binman: rename spl and u-boot nodes

[Marek Vasut]

On 9/19/23 11:28, Rasmus Villemoes wrote:
> The hab signing script doc/imx/habv4/csf_examples/mx8m/csf.sh does
> 
>    fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset
> 
> to figure out the offset of u-boot.itb inside flash.bin. That works
> fine for imx8mm, imx8mn, imx8mq, but fails for imx8mp because in that
> case 'uboot' is merely a label and not actually the node name.
> 
> Homogenize these cases and make imx8mp the same as the other imx8m*
> variants. The binman type is explicitly given and no longer derived
> from the node name, and the csf.sh script will work for all four SOCs.
> 
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> ---
>   arch/arm/dts/imx8mp-u-boot.dtsi | 6 ++++--
>   1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
> index 200938a980..355af16cf3 100644
> --- a/arch/arm/dts/imx8mp-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mp-u-boot.dtsi
> @@ -171,14 +171,16 @@
>   		filename = "flash.bin";
>   		pad-byte = <0x00>;
>   
> -		spl: blob-ext at 1 {
> +		spl {
>   			filename = "spl.bin";
>   			offset = <0x0>;
> +			type = "blob-ext";
>   		};
>   
> -		uboot: blob-ext at 2 {
> +		binman_uboot: uboot {
>   			filename = "u-boot.itb";
>   			offset = <0x58000>;
> +			type = "blob-ext";
>   		};
>   	};
>   };

Reviewed-by: Marek Vasut <marex at denx.de>