[PATCH v5 11/16] mach-snapdragon: fixup power-domains

[Sumit Garg]

On Thu, 28 Mar 2024 at 23:29, Caleb Connolly <caleb.connolly at linaro.org> wrote:
>
> We don't support the RPM(h)PD power domains in U-Boot, and we don't need
> to - the necessary resources are on, and we aren't going to enter any
> low power modes.
>
> We could try using a no-op device, but this requires adding a compatible
> for every platform, and just pollutes the driver model. So instead let's
> just remove every "power-domains" property that references the RPM(h)pd
> power controller. This takes <1ms as we're using OF_LIVE.
>
> Of note, this only applies to drivers which are loading post-relocation.
> Drivers loaded pre-reloc that reference the rpm(h)pd still need
> DM_FLAG_DEFAULT_PD_CTRL_OFF in their flags.
>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>  arch/arm/mach-snapdragon/of_fixup.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>

Acked-by: Sumit Garg <sumit.garg at linaro.org>

-Sumit

> diff --git a/arch/arm/mach-snapdragon/of_fixup.c b/arch/arm/mach-snapdragon/of_fixup.c
> index 4fdfed2dff16..3f7ac227bd09 100644
> --- a/arch/arm/mach-snapdragon/of_fixup.c
> +++ b/arch/arm/mach-snapdragon/of_fixup.c
> @@ -21,8 +21,9 @@
>  #include <dm/of_access.h>
>  #include <dm/of.h>
>  #include <fdt_support.h>
>  #include <linux/errno.h>
> +#include <stdlib.h>
>  #include <time.h>
>
>  /* U-Boot only supports USB high-speed mode on Qualcomm platforms with DWC3
>   * USB controllers. Rather than requiring source level DT changes, we fix up
> @@ -109,8 +110,38 @@ static void fixup_usb_nodes(void)
>                         log_warning("Failed to fixup node %s: %d\n", glue_np->name, ret);
>         }
>  }
>
> +/* Remove all references to the rpmhpd device */
> +static void fixup_power_domains(void)
> +{
> +       struct device_node *pd = NULL, *np = NULL;
> +       struct property *prop;
> +       const __be32 *val;
> +
> +       /* All Qualcomm platforms name the rpm(h)pd "power-controller" */
> +       for_each_of_allnodes(pd) {
> +               if (pd->name && !strcmp("power-controller", pd->name))
> +                       break;
> +       }
> +
> +       /* Sanity check that this is indeed a power domain controller */
> +       if (!of_find_property(pd, "#power-domain-cells", NULL)) {
> +               log_err("Found power-controller but it doesn't have #power-domain-cells\n");
> +               return;
> +       }
> +
> +       /* Remove all references to the power domain controller */
> +       for_each_of_allnodes(np) {
> +               if (!(prop = of_find_property(np, "power-domains", NULL)))
> +                       continue;
> +
> +               val = prop->value;
> +               if (val[0] == cpu_to_fdt32(pd->phandle))
> +                       of_remove_property(np, prop);
> +       }
> +}
> +
>  #define time_call(func, ...) \
>         do { \
>                 u64 start = timer_get_us(); \
>                 func(__VA_ARGS__); \
> @@ -119,5 +150,6 @@ static void fixup_usb_nodes(void)
>
>  void qcom_of_fixup_nodes(void)
>  {
>         time_call(fixup_usb_nodes);
> +       time_call(fixup_power_domains);
>  }
>
> --
> 2.44.0
>