[PATCH v5 10/16] mach-snapdragon: fixup USB nodes
Neil Armstrong
neil.armstrong at linaro.org
Tue Apr 2 10:31:31 CEST 2024
On 28/03/2024 18:59, Caleb Connolly wrote:
> We don't support USB super-speed in U-Boot yet, we lack the SS PHY
> drivers, however from my testing even with a PHY driver there seem to be
> other issues when talking to super-speed peripherals.
>
> In pursuit of maintaining upstream DT compatibility, and simplifying
> porting for new devices, let's implement the DT fixups necessary to
> configure USB in high-speed only mode at runtime. The pattern is
> identical for all Qualcomm boards that use the Synaptics DWC3
> controller:
>
> * Add an additional property on the Qualcomm wrapper node
> * Remove the super-speed phy phandle and phy-name entries.
>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
> arch/arm/mach-snapdragon/Makefile | 1 +
> arch/arm/mach-snapdragon/board.c | 3 +
> arch/arm/mach-snapdragon/of_fixup.c | 123 +++++++++++++++++++++++++++++++++++
> arch/arm/mach-snapdragon/qcom-priv.h | 20 ++++++
> 4 files changed, 147 insertions(+)
>
> diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile
> index 857171e593da..7a4495c8108f 100644
> --- a/arch/arm/mach-snapdragon/Makefile
> +++ b/arch/arm/mach-snapdragon/Makefile
> @@ -2,4 +2,5 @@
> #
> # (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
>
> obj-y += board.o
> +obj-$(CONFIG_OF_LIVE) += of_fixup.o
> diff --git a/arch/arm/mach-snapdragon/board.c b/arch/arm/mach-snapdragon/board.c
> index 6f762fc948bf..65e4c61e866a 100644
> --- a/arch/arm/mach-snapdragon/board.c
> +++ b/arch/arm/mach-snapdragon/board.c
> @@ -27,8 +27,10 @@
> #include <fdt_support.h>
> #include <usb.h>
> #include <sort.h>
>
> +#include "qcom-priv.h"
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> static struct mm_region rbx_mem_map[CONFIG_NR_DRAM_BANKS + 2] = { { 0 } };
>
> @@ -159,8 +161,9 @@ void __weak qcom_board_init(void)
>
> int board_init(void)
> {
> show_psci_version();
> + qcom_of_fixup_nodes();
> qcom_board_init();
> return 0;
> }
>
> diff --git a/arch/arm/mach-snapdragon/of_fixup.c b/arch/arm/mach-snapdragon/of_fixup.c
> new file mode 100644
> index 000000000000..4fdfed2dff16
> --- /dev/null
> +++ b/arch/arm/mach-snapdragon/of_fixup.c
> @@ -0,0 +1,123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * OF_LIVE devicetree fixup.
> + *
> + * This file implements runtime fixups for Qualcomm DT to improve
> + * compatibility with U-Boot. This includes adjusting the USB nodes
> + * to only use USB high-speed, as well as remapping volume buttons
> + * to behave as up/down for navigating U-Boot.
> + *
> + * We use OF_LIVE for this rather than early FDT fixup for a couple
> + * of reasons: it has a much nicer API, is most likely more efficient,
> + * and our changes are only applied to U-Boot. This allows us to use a
> + * DT designed for Linux, run U-Boot with a modified version, and then
> + * boot Linux with the original FDT.
> + *
> + * Copyright (c) 2024 Linaro Ltd.
> + * Author: Caleb Connolly <caleb.connolly at linaro.org>
> + */
> +
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dm/of_access.h>
> +#include <dm/of.h>
> +#include <fdt_support.h>
> +#include <linux/errno.h>
> +#include <time.h>
> +
> +/* U-Boot only supports USB high-speed mode on Qualcomm platforms with DWC3
> + * USB controllers. Rather than requiring source level DT changes, we fix up
> + * DT here. This improves compatibility with upstream DT and simplifies the
> + * porting process for new devices.
> + */
> +static int fixup_qcom_dwc3(struct device_node *glue_np)
> +{
> + struct device_node *dwc3;
> + int ret, len, hsphy_idx = 1;
> + const __be32 *phandles;
> + const char *second_phy_name;
> +
> + debug("Fixing up %s\n", glue_np->name);
> +
> + /* Tell the glue driver to configure the wrapper for high-speed only operation */
> + ret = of_write_prop(glue_np, "qcom,select-utmi-as-pipe-clk", 0, NULL);
> + if (ret) {
> + log_err("Failed to add property 'qcom,select-utmi-as-pipe-clk': %d\n", ret);
> + return ret;
> + }
> +
> + /* Find the DWC3 node itself */
> + dwc3 = of_find_compatible_node(glue_np, NULL, "snps,dwc3");
> + if (!dwc3) {
> + log_err("Failed to find dwc3 node\n");
> + return -ENOENT;
> + }
> +
> + phandles = of_get_property(dwc3, "phys", &len);
> + len /= sizeof(*phandles);
> + if (len == 1) {
> + log_debug("Only one phy, not a superspeed controller\n");
> + return 0;
> + }
> +
> + /* Figure out if the superspeed phy is present and if so then which phy is it? */
> + ret = of_property_read_string_index(dwc3, "phy-names", 1, &second_phy_name);
> + if (ret == -ENODATA) {
> + log_debug("Only one phy, not a super-speed controller\n");
> + return 0;
> + } else if (ret) {
> + log_err("Failed to read second phy name: %d\n", ret);
> + return ret;
> + }
> +
> + if (!strncmp("usb3-phy", second_phy_name, strlen("usb3-phy"))) {
> + log_debug("Second phy isn't superspeed (is '%s') assuming first phy is SS\n",
> + second_phy_name);
> + hsphy_idx = 0;
> + }
> +
> + /* Overwrite the "phys" property to only contain the high-speed phy */
> + ret = of_write_prop(dwc3, "phys", sizeof(*phandles), phandles + hsphy_idx);
> + if (ret) {
> + log_err("Failed to overwrite 'phys' property: %d\n", ret);
> + return ret;
> + }
> +
> + /* Overwrite "phy-names" to only contain a single entry */
> + ret = of_write_prop(dwc3, "phy-names", strlen("usb2-phy"), "usb2-phy");
> + if (ret) {
> + log_err("Failed to overwrite 'phy-names' property: %d\n", ret);
> + return ret;
> + }
> +
> + ret = of_write_prop(dwc3, "maximum-speed", strlen("high-speed"), "high-speed");
> + if (ret) {
> + log_err("Failed to set 'maximum-speed' property: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void fixup_usb_nodes(void)
> +{
> + struct device_node *glue_np = NULL;
> + int ret;
> +
> + while ((glue_np = of_find_compatible_node(glue_np, NULL, "qcom,dwc3"))) {
> + ret = fixup_qcom_dwc3(glue_np);
> + if (ret)
> + log_warning("Failed to fixup node %s: %d\n", glue_np->name, ret);
> + }
> +}
> +
> +#define time_call(func, ...) \
> + do { \
> + u64 start = timer_get_us(); \
> + func(__VA_ARGS__); \
> + debug(#func " took %lluus\n", timer_get_us() - start); \
> + } while (0)
> +
> +void qcom_of_fixup_nodes(void)
> +{
> + time_call(fixup_usb_nodes);
> +}
> diff --git a/arch/arm/mach-snapdragon/qcom-priv.h b/arch/arm/mach-snapdragon/qcom-priv.h
> new file mode 100644
> index 000000000000..0a7ed5eff8b8
> --- /dev/null
> +++ b/arch/arm/mach-snapdragon/qcom-priv.h
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#ifndef __QCOM_PRIV_H__
> +#define __QCOM_PRIV_H__
> +
> +#if CONFIG_IS_ENABLED(OF_LIVE)
> +/**
> + * qcom_of_fixup_nodes() - Fixup Qualcomm DT nodes
> + *
> + * Adjusts nodes in the live tree to improve compatibility with U-Boot.
> + */
> +void qcom_of_fixup_nodes(void);
> +#else
> +static inline void qcom_of_fixup_nodes(void)
> +{
> + log_debug("Unable to dynamically fixup USB nodes, please enable CONFIG_OF_LIVE\n");
> +}
> +#endif /* OF_LIVE */
> +
> +#endif /* __QCOM_PRIV_H__ */
>
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
Also tested on SM8550 & SM8650, so:
Tested-by: Neil Armstrong <neil.armstrong at linaro.org>
More information about the U-Boot
mailing list