[PATCH v2 12/16] arm: dts: k3-am625-sk-u-boot: Add sysreset-controller node

[Mattijs Korpershoek]

Hi Jonathan,

Thank you for the patch.

On lun., avril 08, 2024 at 17:31, Jonathan Humphreys <j-humphreys at ti.com> wrote:

> Signed-off-by: Jonathan Humphreys <j-humphreys at ti.com>

Please consider adding a commit message body.

On the TI vendor tree, there is a similar patch with a commit message:
https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04&id=c5296d943c2c84dd6dcb3b91305d006ac46f3157

Before patch:
=> reset
resetting ...
System reset not supported on this platform
### ERROR ### Please RESET the board ###

With patch applied:
=> reset
resetting ...

Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on am62x sk evm

Andrew also suggested to me that if we are interested by A53 reset only,
we can PSCI reset instead for all k3 architecture:

 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
 @@ -784,6 +784,9 @@ config ARCH_K3
          bool "Texas Instruments' K3 Architecture"
          select SPL
          select SUPPORT_SPL
 +       select PSCI_RESET if ARM64
 +       select SYSRESET if ARM64
 +       select SYSRESET_PSCI if ARM64
          select FIT
          select REGEX
          select FIT_SIGNATURE if ARM64

Has the above been considered?


> ---
>  arch/arm/dts/k3-am625-sk-u-boot.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> index fa778b0ff4c..35bfeae75a0 100644
> --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
> @@ -46,3 +46,12 @@
>  &cpsw_port2 {
>  	status = "disabled";
>  };
> +
> +&dmsc {
> +	bootph-pre-ram;
> +
> +	k3_sysreset: sysreset-controller {
> +		compatible = "ti,sci-sysreset";
> +		bootph-pre-ram;
> +	};
> +};
> -- 
> 2.34.1