[PATCH v2 12/16] arm: dts: k3-am625-sk-u-boot: Add sysreset-controller node

[Jon Humphreys]

Mattijs Korpershoek <mkorpershoek at baylibre.com> writes:

> Hi Jonathan,
>
> Thank you for the patch.
>
> On lun., avril 08, 2024 at 17:31, Jonathan Humphreys <j-humphreys at ti.com> wrote:
>
>> Signed-off-by: Jonathan Humphreys <j-humphreys at ti.com>
>
> Please consider adding a commit message body.

Got it.  thanks.

BTW, the next version of this series will drop this patch as Andrew has
submitted another patch removing the need for this one.  See
https://lore.kernel.org/r/20240402160908.508974-1-afd@ti.com.

>
> On the TI vendor tree, there is a similar patch with a commit message:
> https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04&id=c5296d943c2c84dd6dcb3b91305d006ac46f3157
>
> Before patch:
> => reset
> resetting ...
> System reset not supported on this platform
> ### ERROR ### Please RESET the board ###
>
> With patch applied:
> => reset
> resetting ...
>
> Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on am62x sk evm
>
> Andrew also suggested to me that if we are interested by A53 reset only,
> we can PSCI reset instead for all k3 architecture:
>
>  --- a/arch/arm/Kconfig
>  +++ b/arch/arm/Kconfig
>  @@ -784,6 +784,9 @@ config ARCH_K3
>           bool "Texas Instruments' K3 Architecture"
>           select SPL
>           select SUPPORT_SPL
>  +       select PSCI_RESET if ARM64
>  +       select SYSRESET if ARM64
>  +       select SYSRESET_PSCI if ARM64
>           select FIT
>           select REGEX
>           select FIT_SIGNATURE if ARM64
>
> Has the above been considered?

I am not aware.  I would think that you want full reset, unless you are
thinking about specifying a reset level?

Jon

>
>
>> ---
>>  arch/arm/dts/k3-am625-sk-u-boot.dtsi | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>> index fa778b0ff4c..35bfeae75a0 100644
>> --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>> +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>> @@ -46,3 +46,12 @@
>>  &cpsw_port2 {
>>  	status = "disabled";
>>  };
>> +
>> +&dmsc {
>> +	bootph-pre-ram;
>> +
>> +	k3_sysreset: sysreset-controller {
>> +		compatible = "ti,sci-sysreset";
>> +		bootph-pre-ram;
>> +	};
>> +};
>> -- 
>> 2.34.1