[PATCH v2 12/16] arm: dts: k3-am625-sk-u-boot: Add sysreset-controller node

[Mattijs Korpershoek]

Hi Jon,

On jeu., avril 11, 2024 at 15:30, Jon Humphreys <j-humphreys at ti.com> wrote:

> Mattijs Korpershoek <mkorpershoek at baylibre.com> writes:
>
>> Hi Jonathan,
>>
>> Thank you for the patch.
>>
>> On lun., avril 08, 2024 at 17:31, Jonathan Humphreys <j-humphreys at ti.com> wrote:
>>
>>> Signed-off-by: Jonathan Humphreys <j-humphreys at ti.com>
>>
>> Please consider adding a commit message body.
>
> Got it.  thanks.
>
> BTW, the next version of this series will drop this patch as Andrew has
> submitted another patch removing the need for this one.  See
> https://lore.kernel.org/r/20240402160908.508974-1-afd@ti.com.

I was not aware of that one. thank you for pointing it out. That seems
indeed a better solution.

>
>>
>> On the TI vendor tree, there is a similar patch with a commit message:
>> https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2023.04&id=c5296d943c2c84dd6dcb3b91305d006ac46f3157
>>
>> Before patch:
>> => reset
>> resetting ...
>> System reset not supported on this platform
>> ### ERROR ### Please RESET the board ###
>>
>> With patch applied:
>> => reset
>> resetting ...
>>
>> Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on am62x sk evm
>>
>> Andrew also suggested to me that if we are interested by A53 reset only,
>> we can PSCI reset instead for all k3 architecture:
>>
>>  --- a/arch/arm/Kconfig
>>  +++ b/arch/arm/Kconfig
>>  @@ -784,6 +784,9 @@ config ARCH_K3
>>           bool "Texas Instruments' K3 Architecture"
>>           select SPL
>>           select SUPPORT_SPL
>>  +       select PSCI_RESET if ARM64
>>  +       select SYSRESET if ARM64
>>  +       select SYSRESET_PSCI if ARM64
>>           select FIT
>>           select REGEX
>>           select FIT_SIGNATURE if ARM64
>>
>> Has the above been considered?
>
> I am not aware.  I would think that you want full reset, unless you are
> thinking about specifying a reset level?

On my end, I was mostly interested in resetting from the A53 core, but
the solution you linked previously should work for me.

>
> Jon
>
>>
>>
>>> ---
>>>  arch/arm/dts/k3-am625-sk-u-boot.dtsi | 9 +++++++++
>>>  1 file changed, 9 insertions(+)
>>>
>>> diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>> index fa778b0ff4c..35bfeae75a0 100644
>>> --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>> +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
>>> @@ -46,3 +46,12 @@
>>>  &cpsw_port2 {
>>>  	status = "disabled";
>>>  };
>>> +
>>> +&dmsc {
>>> +	bootph-pre-ram;
>>> +
>>> +	k3_sysreset: sysreset-controller {
>>> +		compatible = "ti,sci-sysreset";
>>> +		bootph-pre-ram;
>>> +	};
>>> +};
>>> -- 
>>> 2.34.1