[PATCH v1 10/25] ARM: dts: stm32: Add gpio-keys for stm32mp157a-dk1-scmi-u-boot

[Patrick DELAUNAY]

Hi,

On 4/9/24 17:02, Patrice Chotard wrote:
> Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare
> 2 gpio-keys.
>
> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
> ---
>
>   arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi | 19 +++++++++++++++++--
>   1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
> index 20728f27ee1..5d49b09c35d 100644
> --- a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
> @@ -3,6 +3,7 @@
>    * Copyright : STMicroelectronics 2022
>    */
>   
> +#include <dt-bindings/input/linux-event-codes.h>
>   #include "stm32mp15-scmi-u-boot.dtsi"
>   
>   / {
> @@ -16,8 +17,22 @@
>   		u-boot,error-led = "error";
>   		u-boot,mmc-env-partition = "u-boot-env";
>   		st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
> -		st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -		st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		button-user-1 {
> +			label = "User-1";
> +			linux,code = <BTN_1>;
> +			gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
> +
> +		button-user-2 {
> +			label = "User-2";
> +			linux,code = <BTN_2>;
> +			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
>   	};
>   
>   	led {



Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Thanks
Patrick