[PATCH v1 10/25] ARM: dts: stm32: Add gpio-keys for stm32mp157a-dk1-scmi-u-boot

[Patrice CHOTARD]

On 4/17/24 11:07, Patrick DELAUNAY wrote:
> Hi,
> 
> On 4/9/24 17:02, Patrice Chotard wrote:
>> Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare
>> 2 gpio-keys.
>>
>> Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
>> ---
>>
>>   arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi | 19 +++++++++++++++++--
>>   1 file changed, 17 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
>> index 20728f27ee1..5d49b09c35d 100644
>> --- a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
>> +++ b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi
>> @@ -3,6 +3,7 @@
>>    * Copyright : STMicroelectronics 2022
>>    */
>>   +#include <dt-bindings/input/linux-event-codes.h>
>>   #include "stm32mp15-scmi-u-boot.dtsi"
>>     / {
>> @@ -16,8 +17,22 @@
>>           u-boot,error-led = "error";
>>           u-boot,mmc-env-partition = "u-boot-env";
>>           st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
>> -        st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>> -        st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>> +    };
>> +
>> +    gpio-keys {
>> +        compatible = "gpio-keys";
>> +
>> +        button-user-1 {
>> +            label = "User-1";
>> +            linux,code = <BTN_1>;
>> +            gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>> +        };
>> +
>> +        button-user-2 {
>> +            label = "User-2";
>> +            linux,code = <BTN_2>;
>> +            gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>> +        };
>>       };
>>         led {
> 
> 
> 
> Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> 
> Thanks
> Patrick
> 
Applied on u-boot-stm32/master