[PATCH 18/19] ARM: dts: stm32: Add alternate pinmux for MP13 UART7 pins

Marek Vasut marex at denx.de
Mon Apr 22 01:17:04 CEST 2024


Add another mux option for UART7 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: u-boot at dh-electronics.com
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
 arch/arm/dts/stm32mp13-pinctrl.dtsi | 41 +++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index 7014c7a6d23..c01d39f03ea 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -647,6 +647,47 @@
 		};
 	};
 
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	uart7_idle_pins_a: uart7-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_sleep_pins_a: uart7-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
+		};
+	};
+
 	uart8_pins_a: uart8-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-- 
2.43.0



More information about the U-Boot mailing list