[PATCH 18/19] ARM: dts: stm32: Add alternate pinmux for MP13 UART7 pins

[Patrice CHOTARD]

On 4/22/24 01:17, Marek Vasut wrote:
> Add another mux option for UART7 pins, this is used on
> DH electronics STM32MP13xx DHCOR DHSBC board.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: u-boot at dh-electronics.com
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  arch/arm/dts/stm32mp13-pinctrl.dtsi | 41 +++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> index 7014c7a6d23..c01d39f03ea 100644
> --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> @@ -647,6 +647,47 @@
>  		};
>  	};
>  
> +	uart7_pins_a: uart7-0 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */
> +				 <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */
> +				 <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */
> +			bias-disable;
> +		};
> +	};
> +
> +	uart7_idle_pins_a: uart7-idle-0 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
> +				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +		pins3 {
> +			pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */
> +			bias-disable;
> +		};
> +	};
> +
> +	uart7_sleep_pins_a: uart7-sleep-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */
> +				 <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */
> +				 <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */
> +				 <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */
> +		};
> +	};
> +
>  	uart8_pins_a: uart8-0 {
>  		pins1 {
>  			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice