[PATCH v1] arm: dts: meson-axg: add NAND controller node for AXG

[Neil Armstrong]

Hi,

On 25/04/2024 19:50, Arseniy Krasnov wrote:
> nfc: Synced from Linux commit 7ca2ef33179f ("Linux 6.6-rc1")
> nand_all_pins: Synced from Linux commit be18d53c32b2 ("Linux 6.7-rc3")

No need to sync DT anymore, this is handled by OF_UPSTREAM and for next release
it's already aligned with v6.9 DT.

Please try your patches with master or next branch of U-Boot repo.

Neil

> 
> Signed-off-by: Arseniy Krasnov <avkrasnov at salutedevices.com>
> ---
>   arch/arm/dts/meson-axg.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
> index 3f5254eeb4..4f6fdd5523 100644
> --- a/arch/arm/dts/meson-axg.dtsi
> +++ b/arch/arm/dts/meson-axg.dtsi
> @@ -430,6 +430,27 @@
>   					};
>   				};
>   
> +				nand_all_pins: nand_all_pins {
> +					mux {
> +						groups = "emmc_nand_d0",
> +							 "emmc_nand_d1",
> +							 "emmc_nand_d2",
> +							 "emmc_nand_d3",
> +							 "emmc_nand_d4",
> +							 "emmc_nand_d5",
> +							 "emmc_nand_d6",
> +							 "emmc_nand_d7",
> +							 "nand_ce0",
> +							 "nand_ale",
> +							 "nand_cle",
> +							 "nand_wen_clk",
> +							 "nand_ren_wr";
> +						function = "nand";
> +						input-enable;
> +						bias-pull-up;
> +					};
> +				};
> +
>   				emmc_ds_pins: emmc_ds {
>   					mux {
>   						groups = "emmc_ds";
> @@ -1906,6 +1927,21 @@
>   				resets = <&reset RESET_SD_EMMC_C>;
>   			};
>   
> +			nfc: nand-controller at 7800 {
> +				compatible = "amlogic,meson-axg-nfc";
> +				reg = <0x0 0x7800 0x0 0x100>,
> +				      <0x0 0x7000 0x0 0x800>;
> +				reg-names = "nfc", "emmc";
> +				pinctrl-0 = <&nand_all_pins>;
> +				pinctrl-names = "default";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> +				clocks = <&clkc CLKID_SD_EMMC_C>,
> +					 <&clkc CLKID_FCLK_DIV2>;
> +				clock-names = "core", "device";
> +			};
> +
>   			usb2_phy1: phy at 9020 {
>   				compatible = "amlogic,meson-gxl-usb2-phy";
>   				#phy-cells = <0>;