[PATCH v1] arm: dts: meson-axg: add NAND controller node for AXG

Arseniy Krasnov avkrasnov at salutedevices.com
Fri Apr 26 10:40:06 CEST 2024


Hi,

On 26.04.2024 11:21, Neil Armstrong wrote:
> Hi,
> 
> On 25/04/2024 19:50, Arseniy Krasnov wrote:
>> nfc: Synced from Linux commit 7ca2ef33179f ("Linux 6.6-rc1")
>> nand_all_pins: Synced from Linux commit be18d53c32b2 ("Linux 6.7-rc3")
> 
> No need to sync DT anymore, this is handled by OF_UPSTREAM and for next release
> it's already aligned with v6.9 DT.
> 
> Please try your patches with master or next branch of U-Boot repo.

Ok, so I can remove "Synced from" from commit description, thus make it empty, and test that patch applies correctly
on uboot master/ next ?

Thanks

> 
> Neil
> 
>>
>> Signed-off-by: Arseniy Krasnov <avkrasnov at salutedevices.com>
>> ---
>>   arch/arm/dts/meson-axg.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
>> index 3f5254eeb4..4f6fdd5523 100644
>> --- a/arch/arm/dts/meson-axg.dtsi
>> +++ b/arch/arm/dts/meson-axg.dtsi
>> @@ -430,6 +430,27 @@
>>                       };
>>                   };
>>   +                nand_all_pins: nand_all_pins {
>> +                    mux {
>> +                        groups = "emmc_nand_d0",
>> +                             "emmc_nand_d1",
>> +                             "emmc_nand_d2",
>> +                             "emmc_nand_d3",
>> +                             "emmc_nand_d4",
>> +                             "emmc_nand_d5",
>> +                             "emmc_nand_d6",
>> +                             "emmc_nand_d7",
>> +                             "nand_ce0",
>> +                             "nand_ale",
>> +                             "nand_cle",
>> +                             "nand_wen_clk",
>> +                             "nand_ren_wr";
>> +                        function = "nand";
>> +                        input-enable;
>> +                        bias-pull-up;
>> +                    };
>> +                };
>> +
>>                   emmc_ds_pins: emmc_ds {
>>                       mux {
>>                           groups = "emmc_ds";
>> @@ -1906,6 +1927,21 @@
>>                   resets = <&reset RESET_SD_EMMC_C>;
>>               };
>>   +            nfc: nand-controller at 7800 {
>> +                compatible = "amlogic,meson-axg-nfc";
>> +                reg = <0x0 0x7800 0x0 0x100>,
>> +                      <0x0 0x7000 0x0 0x800>;
>> +                reg-names = "nfc", "emmc";
>> +                pinctrl-0 = <&nand_all_pins>;
>> +                pinctrl-names = "default";
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +                interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>> +                clocks = <&clkc CLKID_SD_EMMC_C>,
>> +                     <&clkc CLKID_FCLK_DIV2>;
>> +                clock-names = "core", "device";
>> +            };
>> +
>>               usb2_phy1: phy at 9020 {
>>                   compatible = "amlogic,meson-gxl-usb2-phy";
>>                   #phy-cells = <0>;
> 


More information about the U-Boot mailing list