[PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings

[Chris Morgan]

From: Jernej Skrabec <jernej.skrabec at gmail.com>

Adjust H616 LPDDR4 DRAM settings to be in line with vendor driver.

Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
Tested-by: Chris Morgan <macromorgan at hotmail.com>
---
 arch/arm/mach-sunxi/dram_sun50i_h616.c        | 35 +++++++++++++------
 .../dram_timings/h616_lpddr4_2133.c           |  2 +-
 2 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c b/arch/arm/mach-sunxi/dram_sun50i_h616.c
index a20264d8b4..b6638c519e 100644
--- a/arch/arm/mach-sunxi/dram_sun50i_h616.c
+++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c
@@ -293,14 +293,22 @@ static void mctl_phy_configure_odt(const struct dram_para *para)
 	dmb();
 }
 
-static bool mctl_phy_write_leveling(const struct dram_config *config)
+static bool mctl_phy_write_leveling(const struct dram_para *para,
+				    const struct dram_config *config)
 {
 	bool result = true;
 	u32 val;
 
 	clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 0xc0, 0x80);
-	writel(4, SUNXI_DRAM_PHY0_BASE + 0xc);
-	writel(0x40, SUNXI_DRAM_PHY0_BASE + 0x10);
+
+	if (para->type == SUNXI_DRAM_TYPE_LPDDR4) {
+		/* MR2 value */
+		writel(0x1b, SUNXI_DRAM_PHY0_BASE + 0xc);
+		writel(0, SUNXI_DRAM_PHY0_BASE + 0x10);
+	} else {
+		writel(4, SUNXI_DRAM_PHY0_BASE + 0xc);
+		writel(0x40, SUNXI_DRAM_PHY0_BASE + 0x10);
+	}
 
 	setbits_le32(SUNXI_DRAM_PHY0_BASE + 8, 4);
 
@@ -859,9 +867,9 @@ static void mctl_phy_ca_bit_delay_compensation(const struct dram_para *para,
 		}
 		break;
 	case SUNXI_DRAM_TYPE_LPDDR4:
-		if (para->tpr2 & 1) {
-			writel(val, SUNXI_DRAM_PHY0_BASE + 0x788);
-		} else {
+		writel(val, SUNXI_DRAM_PHY0_BASE + 0x788);
+		if (config->ranks == 2) {
+			val = (para->tpr10 >> 11) & 0x1e;
 			writel(val, SUNXI_DRAM_PHY0_BASE + 0x794);
 		};
 		break;
@@ -949,6 +957,8 @@ static bool mctl_phy_init(const struct dram_para *para,
 		break;
 	case SUNXI_DRAM_TYPE_LPDDR4:
 		val = para->tpr6 >> 24 & 0xff;
+		if (!val)
+			val = 0x33;
 		break;
 	case SUNXI_DRAM_TYPE_DDR4:
 	default:
@@ -1080,19 +1090,27 @@ static bool mctl_phy_init(const struct dram_para *para,
 		mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
 
 		writel(0xb04, &mctl_ctl->mrctrl1);
+		udelay(10);
 		writel(0x80000030, &mctl_ctl->mrctrl0);
+		udelay(10);
 		mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
 
 		writel(0xc72, &mctl_ctl->mrctrl1);
+		udelay(10);
 		writel(0x80000030, &mctl_ctl->mrctrl0);
+		udelay(10);
 		mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
 
 		writel(0xe09, &mctl_ctl->mrctrl1);
+		udelay(10);
 		writel(0x80000030, &mctl_ctl->mrctrl0);
+		udelay(10);
 		mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
 
 		writel(0x1624, &mctl_ctl->mrctrl1);
+		udelay(10);
 		writel(0x80000030, &mctl_ctl->mrctrl0);
+		udelay(10);
 		mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0);
 		break;
 	case SUNXI_DRAM_TYPE_DDR4:
@@ -1108,7 +1126,7 @@ static bool mctl_phy_init(const struct dram_para *para,
 
 	if (para->tpr10 & TPR10_WRITE_LEVELING) {
 		for (i = 0; i < 5; i++)
-			if (mctl_phy_write_leveling(config))
+			if (mctl_phy_write_leveling(para, config))
 				break;
 		if (i == 5) {
 			debug("write leveling failed!\n");
@@ -1234,9 +1252,6 @@ static bool mctl_ctrl_init(const struct dram_para *para,
 	setbits_le32(&mctl_ctl->unk_0x3180, BIT(31) | BIT(30));
 	setbits_le32(&mctl_ctl->unk_0x4180, BIT(31) | BIT(30));
 
-	if (para->type == SUNXI_DRAM_TYPE_LPDDR4)
-		setbits_le32(&mctl_ctl->dbictl, 0x1);
-
 	setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
 	clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
 
diff --git a/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
index e6446b9180..6f5c4acbd6 100644
--- a/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
+++ b/arch/arm/mach-sunxi/dram_timings/h616_lpddr4_2133.c
@@ -23,7 +23,7 @@ void mctl_set_timing_params(const struct dram_para *para)
 	u8 trcd		= max(ns_to_t(18), 2);
 	u8 trc		= ns_to_t(65);
 	u8 txp		= max(ns_to_t(8), 2);
-	u8 trtp		= max(ns_to_t(8), 4);
+	u8 trtp		= 4;
 	u8 trp		= ns_to_t(21);
 	u8 tras		= ns_to_t(42);
 	u16 trefi	= ns_to_t(3904) / 32;
-- 
2.34.1