August 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Aug 1 00:40:09 CEST 2024
Ending: Sat Aug 31 22:33:37 CEST 2024
Messages: 2963

• Allow encrypting data in FIT with binman   Paul HENRYS (EXT)
• uboot eth_initialize   Claudio Spinelli (Nokia)
• [PATCH 0/7] Add the USB5744 hub driver as per new DT binding   Abbarapu, Venkatesh
• [PATCH] sf: Add lock info option to sf command list   Venkatesh Yadav Abbarapu
• pinctrl warning on sandbox   Sean Anderson
• [PATCH] sandbox: Fix pinmux warnings with non-test devicetrees   Sean Anderson
• [PATCH] pinmux: generic: Use ENOENT instead of ENOSYS   Sean Anderson
• [PATCH 0/2] arm: zynqmp: Initialize some registers at boot   Sean Anderson
• [PATCH 1/2] zynqmp: Disable secure access for boot devices   Sean Anderson
• [PATCH 2/2] arm: zynqmp: Enable non-invasive CCI-400 PMU debug   Sean Anderson
• [PATCH v2] sandbox: Fix pinmux warnings with non-test devicetrees   Sean Anderson
• [PATCH v3] sandbox: Fix pinmux warnings with non-test devicetrees   Sean Anderson
• [PATCH] spl: fix error handling of spl_fit_read   Sean Anderson
• [PATCH 09/21] test: Update NAND test to avoid extra macros   Sean Anderson
• Assistance with U-Boot Compilation Error   Sean Anderson
• [PATCH] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   MD Danish Anwar
• [PATCH v2] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   MD Danish Anwar
• [PATCH 5/6] efi: Use malloc() for the EFI pool   Ilias Apalodimas
• [PATCH 5/6] efi: Use malloc() for the EFI pool   Ilias Apalodimas
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Ilias Apalodimas
• [PATCH v2 29/39] efi_loader: Shorten the app rules further   Ilias Apalodimas
• [PATCH] configs: enable efidebug and EFI http boot on QEMU aarch64   Ilias Apalodimas
• [PATCH 1/1] efi_loader: correct description of efi_get_distro_fdt_name   Ilias Apalodimas
• [PATCH v2 21/39] test: mbr: Unmap the buffers after use   Ilias Apalodimas
• [PATCH v2 22/39] test: mbr: Use a constant for the block size   Ilias Apalodimas
• [PATCH v2 33/39] efi: Use the same filename for all sandbox builds   Ilias Apalodimas
• [PATCH v2 19/39] read: Use map_sysmem() with buffers in the read command   Ilias Apalodimas
• [PATCH] configs: enable efidebug and EFI http boot on QEMU aarch64   Ilias Apalodimas
• [PATCH v8 02/23] net: wget: removed unused function wget_success()   Ilias Apalodimas
• [PATCH v8 03/23] net: wget: allow EFI boot   Ilias Apalodimas
• Pull request for tpm-master-09082024   Ilias Apalodimas
• [PATCH v3 29/40] efi_loader: Shorten the app rules   Ilias Apalodimas
• [PATCH v3 31/40] efi: Show the vendor in helloworld   Ilias Apalodimas
• [PATCH v3 31/40] efi: Show the vendor in helloworld   Ilias Apalodimas
• [PATCH v3 00/40] efi: Add a test for EFI bootmeth   Ilias Apalodimas
• [PATCH 1/3] efi_loader: shorten efi_bootmgr_release_uridp_resource()   Ilias Apalodimas
• [PATCH 2/3] efi_loader: rename efi_bootmgr_image_return_notify   Ilias Apalodimas
• [PATCH 3/3] efi_loader: return the correct error in efi_bootmgr_release_uridp()   Ilias Apalodimas
• [PATCH] efi_loader: fix memory freeing in efi_get_dp_from_boot()   Ilias Apalodimas
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Ilias Apalodimas
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Ilias Apalodimas
• [PATCH v5 02/27] mbedtls: add mbedtls into the build system   Ilias Apalodimas
• [PATCH] tools/mkeficapsule: correct printf codes   Ilias Apalodimas
• [PATCH v3 00/40] efi: Add a test for EFI bootmeth   Ilias Apalodimas
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Ilias Apalodimas
• [PATCH v5 02/27] mbedtls: add mbedtls into the build system   Ilias Apalodimas
• [PATCH] Kconfig: clean up the efi configuration status   Ilias Apalodimas
• [PATCH] Kconfig: clean up the efi configuration status   Ilias Apalodimas
• [PATCH] Kconfig: clean up the efi configuration status   Ilias Apalodimas
• u-boot on raspberry pi with secure boot   Ilias Apalodimas
• [PATCH v3 18/27] lmb: remove the unused board_lmb_reserve() function   Ilias Apalodimas
• [PATCH 1/1] efi_loader: allow EFI_LOADER_BOUNCE_BUFFER on all architectures   Ilias Apalodimas
• [PATCH v4 02/14] efi_loader: Put back copyright message   Ilias Apalodimas
• [PATCH v4 03/14] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE   Ilias Apalodimas
• [PATCH v4 05/14] efi_loader: Shorten the app rules   Ilias Apalodimas
• [PATCH v2 3/3] ext4: Fix zalloc()   Ilias Apalodimas
• [PATCH v2 05/32] lmb: use the BIT macro for lmb flags   Ilias Apalodimas
• [PATCH v4 09/14] bootstd: Add debugging for efi bootmeth   Ilias Apalodimas
• [PATCH v4 08/14] efi: Use the same filename for all sandbox builds   Ilias Apalodimas
• [PATCH v4 11/14] efi_loader: Add a test app   Ilias Apalodimas
• [PATCH v4 12/14] efi_loader: Avoid using sandbox virtio devices   Ilias Apalodimas
• [PATCH v4 10/14] efi_loader: Disable ANSI output for tests   Ilias Apalodimas
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Ilias Apalodimas
• [PATCH v7 09/11] tools: mkeficapsule: support generating dynamic GUIDs   Ilias Apalodimas
• [PATCH v7 04/11] doc: uefi: document dynamic UUID generation   Ilias Apalodimas
• [PATCH v7 06/11] lib: uuid: supporting building as part of host tools   Ilias Apalodimas
• [PATCH v7 11/11] test: lib/uuid: add tests for UUID version/variant bits   Ilias Apalodimas
• [PATCH v7 03/11] efi: add a helper to generate dynamic UUIDs   Ilias Apalodimas
• [PATCH v7 02/11] lib: uuid: add UUID v5 support   Ilias Apalodimas
• [PATCH v4 07/27] lmb: remove config symbols used for lmb region count   Ilias Apalodimas
• [PATCH v4 08/27] lmb: config: add lmb config symbols for SPL   Ilias Apalodimas
• [PATCH v4 09/27] lmb: allow lmb module to be used in SPL   Ilias Apalodimas
• [PATCH v4 12/27] lmb: remove the lmb_init_and_reserve() function   Ilias Apalodimas
• [PATCH v4 14/27] lmb: bootm: remove superfluous lmb stub functions   Ilias Apalodimas
• [PATCH v4 15/27] lmb: init: initialise the lmb data structures during board init   Ilias Apalodimas
• [PATCH v4 17/27] lmb: do away with arch_lmb_reserve()   Ilias Apalodimas
• [PATCH 3/3] tpm_tcg2: hash algo optimization   Ilias Apalodimas
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Ilias Apalodimas
• [PATCH v6 02/28] mbedtls: add mbedtls into the build system   Ilias Apalodimas
• [PATCH v6 12/28] mbedtls/external: update MbedTLS PKCS7 test suites   Ilias Apalodimas
• [PATCH v6 09/28] mbedtls/external: support Microsoft Authentication Code   Ilias Apalodimas
• [PATCH v6 10/28] mbedtls/external: support PKCS9 Authenticate Attributes   Ilias Apalodimas
• [PATCH v6 28/28] configs: enable MbedTLS as default setting   Ilias Apalodimas
• [PATCH v6 26/28] asn1_decoder: add build options for ASN1 decoder   Ilias Apalodimas
• [PATCH v6 03/28] lib: Adapt digest header files to MbedTLS   Ilias Apalodimas
• [PATCH v6 07/28] hash: integrate hash on mbedtls   Ilias Apalodimas
• [PATCH v6 22/28] mbedtls: add MSCode parser porting layer   Ilias Apalodimas
• [PATCH v6 22/28] mbedtls: add MSCode parser porting layer   Ilias Apalodimas
• [PATCH v6 16/28] mbedtls: add public key porting layer   Ilias Apalodimas
• [PATCH v6 24/28] mbedtls: add RSA helper layer on MbedTLS   Ilias Apalodimas
• [PATCH v6 06/28] mbedtls: add digest shim layer for MbedTLS   Ilias Apalodimas
• [PATCH 01/13] Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word   Ilias Apalodimas
• [PATCH 03/13] at91: rename mem_init() to at91_mem_init()   Ilias Apalodimas
• [PATCH 04/13] arm: omap2: add missing #include <netdev.h>   Ilias Apalodimas
• [PATCH 07/13] net: phy: ncsi: depend on NET   Ilias Apalodimas
• [PATCH 09/13] net: wget: allow EFI boot   Ilias Apalodimas
• [PATCH 10/13] net: fec_mxc_init(): do not ignore return status of fec_open()   Ilias Apalodimas
• [PATCH 11/13] test/py: net_boot: fix comment   Ilias Apalodimas
• [PATCH 12/13] test/py: test_efi_loader: add missing dependency on cmd_tftpboot   Ilias Apalodimas
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Ilias Apalodimas
• [PATCH v9 35/37] [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX   Ilias Apalodimas
• [PATCH v6 07/28] hash: integrate hash on mbedtls   Ilias Apalodimas
• [PATCH v2] Kconfig: clean up the efi configuration status   Ilias Apalodimas
• [PATCH 09/13] net: wget: allow EFI boot   Ilias Apalodimas
• [PATCH 00/11] mach-snapdragon: various improvements for newer boards   Neil Armstrong
• [PATCH 1/7] clk/qcom: add initial clock driver for sc7280   Neil Armstrong
• [PATCH 4/7] iommu: qcom-smmu: add sc7280-smmu-500 compatible   Neil Armstrong
• [PATCH 5/7] qcom_defconfig: enable SC7280 clocks   Neil Armstrong
• [PATCH] board/qualcomm: add debug config fragments for some SoCs   Neil Armstrong
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Neil Armstrong
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Neil Armstrong
• [PATCH v3 0/3] Meson: R/W support for pages used by boot ROM   Neil Armstrong
• [PATCH v5 01/20] test: Allow signaling that U-Boot is ready   Neil Armstrong
• [PATCH 1/3] tpm: update tpm hash algorithm according to tpm2.0 spec 1.59   Benjamin BARATTE
• [PATCH 3/3] tpm_tcg2: hash algo optimization   Benjamin BARATTE
• Verified Boot through U-Boot for RPi3 with OP-TEE   Joakim Bech
• [PATCH u-boot-marvell 0/3] Turris Omnia DDR speed change with reset button (for 2024.10)   Marek Behún
• [PATCH u-boot-marvell 1/3] arm: mvebu: turris_omnia: Rename variable holding EEPROM udevice   Marek Behún
• [PATCH u-boot-marvell 2/3] arm: mvebu: turris_omnia: Use the i2c_eeprom misc driver for EEPROM reading in U-Boot proper   Marek Behún
• [PATCH u-boot-marvell 3/3] arm: mvebu: turris_omnia: Switch DDR speed to 1333H when reset 9 is selected   Marek Behún
• [PATCH 1/2] bootm: adjust the print format   Dario Binacchi
• [PATCH 2/2] cmd: booti: adjust the print format   Dario Binacchi
• [PATCH 2/2] cmd: booti: adjust the print format   Dario Binacchi
• [PATCH 0/5] imx: imx8ulp: add binman support   Gary Bisson
• [PATCH 1/5] tools: imx8image: fix soc variable for ULP   Gary Bisson
• [PATCH 2/5] tools: imx8image: add upower image support   Gary Bisson
• [PATCH 3/5] spl: binman: Disable u_boot_any symbols for i.MX 8ULP boards   Gary Bisson
• [PATCH 4/5] mach-imx: Add i.MX 8ULP binman support   Gary Bisson
• [PATCH 5/5] imx8ulp_evk: enable binman support   Gary Bisson
• [PATCH 0/5] imx: imx8ulp: add binman support   Gary Bisson
• [PATCH v2 0/5] imx: imx8ulp: add binman support   Gary Bisson
• [PATCH v2 1/5] tools: imx8image: fix soc variable for ULP   Gary Bisson
• [PATCH v2 2/5] tools: imx8image: add upower image support   Gary Bisson
• [PATCH v2 3/5] spl: binman: Disable u_boot_any symbols for i.MX 8ULP boards   Gary Bisson
• [PATCH v2 4/5] mach-imx: Add i.MX 8ULP binman support   Gary Bisson
• [PATCH v2 5/5] imx8ulp_evk: enable binman support   Gary Bisson
• [PATCH] riscv: resume needs to be a global   Anton Blanchard
• [PATCH v5 03/20] configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y   Felix Brack
• [PATCH] ram: k3-ddrss: Handle error properly in lpddr4_start   Bryan Brattlof
• [PATCH v3 0/7] Add AVS support for J721S2   Manorit Chawdhry
• [PATCH v3 1/7] power: pmic: tps65941: Add DM_PMIC dependency   Manorit Chawdhry
• [PATCH v3 2/7] drivers: misc: k3_avs: Check return code while programming AVS   Manorit Chawdhry
• [PATCH v3 3/7] arm: dts: k3-j7*-r5: Add MPU clock in clocks property   Manorit Chawdhry
• [PATCH v3 4/7] drivers: misc: k3_avs: Extract MPU clk and dev ID from DT   Manorit Chawdhry
• [PATCH v3 5/7] arm: mach-k3: j721s2_init: Initialize AVS Class 0   Manorit Chawdhry
• [PATCH v3 6/7] arm: dts: j721s2: Add VTM node in R5   Manorit Chawdhry
• [PATCH v3 7/7] configs: j721s2_evm_r5_defconfig: Add AVS Configs   Manorit Chawdhry
• [PATCH v4 0/9] Add Starfive JH7110 Cadence USB driver   Minda Chen
• [PATCH v4 1/9] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode()   Minda Chen
• [PATCH v4 2/9] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver   Minda Chen
• [PATCH v4 3/9] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Minda Chen
• [PATCH v4 4/9] usb: cdns: starfive: Add cdns USB driver   Minda Chen
• [PATCH v4 5/9] spl: starfive: visionfive2: Disable USB overcurrent pin by default.   Minda Chen
• [PATCH v4 6/9] configs: starfive: Add visionfive2 cadence USB configuration   Minda Chen
• [PATCH v4 7/9] dts: starfive: Add JH7110 Cadence USB dts node   Minda Chen
• [PATCH v4 8/9] spl: starfive: star64: Setup USB fdt fixup function   Minda Chen
• [PATCH v4 9/9] MAINTAINERS: Update Starfive visionfive2 maintain files.   Minda Chen
• [PATCH v4 7/9] dts: starfive: Add JH7110 Cadence USB dts node   Minda Chen
• [PATCH v1 0/3] Risc-V cache operations   Mayuresh Chitale
• [PATCH v1 1/3] riscv: Add support for defining instructions   Mayuresh Chitale
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Mayuresh Chitale
• [PATCH v1 3/3] board: qemu-riscv: Override enable_caches   Mayuresh Chitale
• [PATCH v1 3/3] board: qemu-riscv: Override enable_caches   Mayuresh Chitale
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Mayuresh Chitale
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Mayuresh Chitale
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Mayuresh Chitale
• [PATCH v2 0/2] Risc-V cache operations   Mayuresh Chitale
• [PATCH v2 1/2] riscv: Add support for defining instructions   Mayuresh Chitale
• [PATCH v2 2/2] riscv: cache: Add CBO instructions   Mayuresh Chitale
• [PATCH] usb: dwc3-generic: fix CONFIG_DM_REGULATOR-off case   Caleb Connolly
• [PATCH v2 0/3] ARM64: add symbol name lookup and print a backtrace on exception   Caleb Connolly
• [PATCH v2 1/3] drop unused kallsyms support   Caleb Connolly
• [PATCH v2 2/3] add support for symbol lookups   Caleb Connolly
• [PATCH v2 3/3] arm64: unwind stack on exception   Caleb Connolly
• [PATCH v6 00/11] efi: CapsuleUpdate: support for dynamic UUIDs   Caleb Connolly
• [PATCH v6 01/11] efi: define struct efi_guid   Caleb Connolly
• [PATCH v6 02/11] lib: uuid: add UUID v5 support   Caleb Connolly
• [PATCH v6 03/11] efi: add a helper to generate dynamic UUIDs   Caleb Connolly
• [PATCH v6 04/11] doc: uefi: document dynamic UUID generation   Caleb Connolly
• [PATCH v6 05/11] sandbox: switch to dynamic UUIDs   Caleb Connolly
• [PATCH v6 06/11] lib: uuid: supporting building as part of host tools   Caleb Connolly
• [PATCH v6 07/11] include: export uuid.h   Caleb Connolly
• [PATCH v6 08/11] tools: mkeficapsule: use u-boot UUID library   Caleb Connolly
• [PATCH v6 09/11] tools: mkeficapsule: support generating dynamic GUIDs   Caleb Connolly
• [PATCH v6 10/11] test: lib/uuid: add unit tests for dynamic UUIDs   Caleb Connolly
• [PATCH v6 11/11] test: lib/uuid: add tests for UUID version/variant bits   Caleb Connolly
• [PATCH] cmd: add a fetch utility   Caleb Connolly
• [PATCH v6 00/11] efi: CapsuleUpdate: support for dynamic UUIDs   Caleb Connolly
• [PATCH 00/11] mach-snapdragon: various improvements for newer boards   Caleb Connolly
• [PATCH 01/11] mach-snapdragon: refactor board_fdt_blob_setup()   Caleb Connolly
• [PATCH 02/11] mach-snapdragon: parse memory ourselves   Caleb Connolly
• [PATCH 03/11] mach-snapdragon: use 1MiB for get_page_table_size()   Caleb Connolly
• [PATCH 04/11] mach-snapdragon: set serial number   Caleb Connolly
• [PATCH 05/11] mach-snapdragon: allocate fastboot buffer dynamically   Caleb Connolly
• [PATCH 06/11] mach-snapdragon: populate fallback FDT   Caleb Connolly
• [PATCH 07/11] mach-snapdragon: set loadaddr   Caleb Connolly
• [PATCH 08/11] armv8: mmu: add a way to map additional regions   Caleb Connolly
• [PATCH 09/11] soc: qcom: cmd-db: use strncmp() instead of memcmp()   Caleb Connolly
• [PATCH 10/11] soc: qcom: cmd-db: map cmd-db region   Caleb Connolly
• [PATCH 11/11] qcom_defconfig: bump CONFIG_NR_DRAM_BANKS   Caleb Connolly
• [PATCH 03/11] mach-snapdragon: use 1MiB for get_page_table_size()   Caleb Connolly
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Caleb Connolly
• [PATCH 0/7] Qualcomm: add support for SC7280 and the RB3 Gen 2   Caleb Connolly
• [PATCH 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH 2/7] dts: qcs6490-rb3gen2-u-boot: add override dtsi   Caleb Connolly
• [PATCH 3/7] dts: qcs6490-rb3gen2-u-boot: USB host mode   Caleb Connolly
• [PATCH 4/7] iommu: qcom-smmu: add sc7280-smmu-500 compatible   Caleb Connolly
• [PATCH 5/7] qcom_defconfig: enable SC7280 clocks   Caleb Connolly
• [PATCH 6/7] configs: add qcm6490_defconfig   Caleb Connolly
• [PATCH 7/7] doc: board/qualcomm: document rb3gen2 building/flashing   Caleb Connolly
• [PATCH v7 00/11] efi: CapsuleUpdate: support for dynamic UUIDs   Caleb Connolly
• [PATCH v7 01/11] efi: define struct efi_guid   Caleb Connolly
• [PATCH v7 02/11] lib: uuid: add UUID v5 support   Caleb Connolly
• [PATCH v7 03/11] efi: add a helper to generate dynamic UUIDs   Caleb Connolly
• [PATCH v7 04/11] doc: uefi: document dynamic UUID generation   Caleb Connolly
• [PATCH v7 05/11] sandbox: switch to dynamic UUIDs   Caleb Connolly
• [PATCH v7 06/11] lib: uuid: supporting building as part of host tools   Caleb Connolly
• [PATCH v7 07/11] include: export uuid.h   Caleb Connolly
• [PATCH v7 08/11] tools: mkeficapsule: use u-boot UUID library   Caleb Connolly
• [PATCH v7 09/11] tools: mkeficapsule: support generating dynamic GUIDs   Caleb Connolly
• [PATCH v7 10/11] test: lib/uuid: add unit tests for dynamic UUIDs   Caleb Connolly
• [PATCH v7 11/11] test: lib/uuid: add tests for UUID version/variant bits   Caleb Connolly
• [PATCH] usb: dwc3-generic: fix CONFIG_DM_REGULATOR-off case   Caleb Connolly
• [PATCH] cmd: add a fetch utility   Caleb Connolly
• [PATCH] cmd: add a fetch utility   Caleb Connolly
• [PATCH 11/40] lmb: make LMB memory map persistent and global   Caleb Connolly
• [PATCH 18/40] lmb: remove the lmb_init_and_reserve() function   Caleb Connolly
• [PATCH 05/10] armv8: Add arch-specific sysinfo driver   Caleb Connolly
• usb: ehci: Fix db410c usb reset not working   Caleb Connolly
• [PATCH 00/10] SMBIOS improvements   Caleb Connolly
• [PATCH 0/4] clk/qcom: implement clk dump callback   Caleb Connolly
• [PATCH 1/4] clk/qcom: implement clk dump   Caleb Connolly
• [PATCH 2/4] clk/qcom: sdm845: add dump data   Caleb Connolly
• [PATCH 3/4] clk/qcom: sm6115: add debug data   Caleb Connolly
• [PATCH 4/4] clk/qcom: sm8250: add debug data   Caleb Connolly
• [PATCH 00/10] SMBIOS improvements   Caleb Connolly
• u-boot on raspberry pi with secure boot   Caleb Connolly
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Caleb Connolly
• [PATCH] board/qualcomm: add debug config fragments for some SoCs   Caleb Connolly
• [PATCH v2 0/7] Qualcomm: add support for SC7280 and the RB3 Gen 2   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH v2 2/7] dts: qcs6490-rb3gen2-u-boot: add override dtsi   Caleb Connolly
• [PATCH v2 3/7] dts: qcs6490-rb3gen2-u-boot: USB host mode   Caleb Connolly
• [PATCH v2 4/7] iommu: qcom-smmu: add sc7280-smmu-500 compatible   Caleb Connolly
• [PATCH v2 5/7] qcom_defconfig: enable SC7280 clocks   Caleb Connolly
• [PATCH v2 6/7] configs: add qcm6490_defconfig   Caleb Connolly
• [PATCH v2 7/7] doc: board/qualcomm: document rb3gen2 building/flashing   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH 00/11] mach-snapdragon: various improvements for newer boards   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Caleb Connolly
• [PATCH 1/2] bootm: adjust the print format   Caleb Connolly
• [PATCH 00/19] vbe: Series part E   Caleb Connolly
• [PATCH v8 00/11] efi: CapsuleUpdate: support for dynamic UUIDs   Caleb Connolly
• [PATCH v8 01/11] efi: define struct efi_guid   Caleb Connolly
• [PATCH v8 02/11] lib: uuid: add UUID v5 support   Caleb Connolly
• [PATCH v8 03/11] efi: add a helper to generate dynamic UUIDs   Caleb Connolly
• [PATCH v8 04/11] doc: uefi: document dynamic UUID generation   Caleb Connolly
• [PATCH v8 05/11] sandbox: switch to dynamic UUIDs   Caleb Connolly
• [PATCH v8 06/11] lib: uuid: supporting building as part of host tools   Caleb Connolly
• [PATCH v8 07/11] include: export uuid.h   Caleb Connolly
• [PATCH v8 08/11] tools: mkeficapsule: use u-boot UUID library   Caleb Connolly
• [PATCH v8 09/11] tools: mkeficapsule: support generating dynamic GUIDs   Caleb Connolly
• [PATCH v8 10/11] test: lib/uuid: add unit tests for dynamic UUIDs   Caleb Connolly
• [PATCH v8 11/11] test: lib/uuid: add tests for UUID version/variant bits   Caleb Connolly
• [PATCH] cmd: fdt: use U-Boot's FDT by default   Caleb Connolly
• [PATCH 0/4] Qualcomm smartphone support   Caleb Connolly
• [PATCH 1/4] board/qualcomm: introduce phone config   Caleb Connolly
• [PATCH 2/4] cli_hush: run bootmenu on retry   Caleb Connolly
• [PATCH 3/4] bootretry: check for bootretry variable changes   Caleb Connolly
• [PATCH 4/4] doc: board/qualcomm: describe phone support and bringup   Caleb Connolly
• RPI CM4 - I2C BUS and Device Tree   Romain Crausaz
• RPI CM4 - I2C BUS and Device Tree   Romain Crausaz
• [PATCH v2] rockchip: px30: clk: add UART0 clock getter/setter   Lukasz Czechowski
• [PATCH v3] rockchip: px30: clk: add UART0 clock getter/setter   Lukasz Czechowski
• [PATCH 0/4] Rockchip: Allow to silent TPL/SPL debug console   Lukasz Czechowski
• [PATCH 1/4] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set   Lukasz Czechowski
• [PATCH 2/4] ram: rockchip: Kconfig: Fix dependency of RAM_ROCKCHIP_DEBUG   Lukasz Czechowski
• [PATCH 3/4] rockchip: Kconfig: PX30: Weaken dependency TPL/SPL serial   Lukasz Czechowski
• [PATCH 4/4] arm: rockchip: PX30: Fix hard dependency to DEBUG_UART_BOARD_INIT   Lukasz Czechowski
• [PATCH] rockchip: clk: add UART0 clock getter/setter   Łukasz Czechowski
• [PATCH v2] cmd: led: fix led command usage for the LED_SW_BLINK enabled case   Alexander Dahl
• [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Alexander Dahl
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Alexander Dahl
• Fw: ECDSA for FIT Files in U-Boot   Alexander Dahl
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Alexander Dahl
• [PATCH v2 9/9] doc: introduce led.rst documentation   Alexander Dahl
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Alexander Dahl
• Vulnerability in LZMA implementation   Darek
• Vulnerability in LZMA implementation   Darek
• [PATCH] arm: dts: keystone: Move to OF_UPSTREAM   Andrew Davis
• [PATCH] defconfig: Add a config for AM335x High Security EVM with SPI Boot support   Andrew Davis
• [PATCH 1/5] arch: arm: dts: k3-j784s4-r5-evm: Add missing fss range   Andrew Davis
• [PATCH v2] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   Andrew Davis
• [PATCH v2 1/5] arch: arm: dts: k3-j784s4-r5-evm: Add missing fss range   Andrew Davis
• [PATCH v4 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Andrew Davis
• [PATCH v4 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Andrew Davis
• Advisory: Buffer overread in U-Boot DHCP   Simon Diepold
• [PATCH v2 1/1] ata: sata_rescan must scan for block devices   Tony Dinh
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Tony Dinh
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Tony Dinh
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Francesco Dolcini
• [PATCH v1 0/1] board: tegra: convert boards to text env   Francesco Dolcini
• [PATCH v1 0/1] board: tegra: convert boards to text env   Francesco Dolcini
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Francesco Dolcini
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Francesco Dolcini
• [PATCH v1 0/4] apalis/colibri imx8: enable additional features   Francesco Dolcini
• [PATCH V8 2/7] doc: ti: k3: Add TIFS Stub documentation   Francesco Dolcini
• [PATCH v2 1/1] board: tegra: convert boards to text env   Francesco Dolcini
• [PATCH] configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS   Francesco Dolcini
• [PATCH] fs: Fix SPL build if SPL_FS_LOADER is enabled and FS_LOADER is disabled   Francesco Dolcini
• [PATCH 1/1] riscv: CONFIG_SPL_FRAMEPOINTER must depend on CONFIG_SPL   Ben Dooks
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Conor Dooley
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Conor Dooley
• [PATCH 1/6] doc/arch/m68k.rst: Update toolchain comment   Angelo Dureghello
• [PATCH] configs: am64x*_r5_defconfig: Drop BOOTCOMMAND   Wadim Egorov
• [PATCH 1/2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Fabio Estevam
• [PATCH 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240802   Fabio Estevam
• [PATCH v2] warp7: Convert to OF_UPSTREAM   Fabio Estevam
• [PATCH 0/3] Enable CMD_ERASEENV for Phytec imx8m boards   Fabio Estevam
• [PATCHv5 00/14] Add a subcommand 'release' to cmd/cpu.c   Fabio Estevam
• [PATCH v2 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Fabio Estevam
• [PATCH] imx: hab: Make imx_hab_is_enabled dependent on FIELD_RETURN   Fabio Estevam
• [PATCH 0/5] imx: imx8ulp: add binman support   Fabio Estevam
• [PATCH v2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Fabio Estevam
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Fabio Estevam
• [PATCH v2 10/11] board: cm_fx6: convert to DM_I2C   Fabio Estevam
• [PATCH v8 06/23] net: fec_mxc_init(): do not ignore return status of fec_open()   Fabio Estevam
• [PATCH] tqma6q_mba6: Convert to watchdog driver model   Fabio Estevam
• [PATCH] imx6-tqma6: Convert to OF_UPSTREAM   Fabio Estevam
• [PATCH 1/2] tqma6: Convert to PMIC and I2C driver model   Fabio Estevam
• [PATCH 2/2] tqma6: Do not print the board name twice   Fabio Estevam
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Fabio Estevam
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240813   Fabio Estevam
• [PATCH 1/5] tools: imx8image: fix soc variable for ULP   Fabio Estevam
• [PATCH] imx: imx8: fix build when CONFIG_IMX_BOOTAUX is set   Fabio Estevam
• [PATCH] tqma6q_mba6: Convert to watchdog driver model   Fabio Estevam
• [PATCH] imx6-tqma6: Convert to OF_UPSTREAM   Fabio Estevam
• [PATCH 1/2] tqma6: Convert to PMIC and I2C driver model   Fabio Estevam
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Fabio Estevam
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Fabio Estevam
• u-boot does not detect and correct bitflip when loading kernel from NAND   Fabio Estevam
• [PATCH 1/3] tqma6: Remove non-DM board code   Fabio Estevam
• [PATCH 2/3] tqma6_mba6: Remove unused defines   Fabio Estevam
• [PATCH 3/3] tqma6_mba6: Remove UART board code   Fabio Estevam
• [Binman] Question regarding SPL symbol offsets generation   Fabio Estevam
• [PATCH] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Fabio Estevam
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Fabio Estevam
• [PATCH v4] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Fabio Estevam
• [PATCH] dts: imx: Enable USB support in imx8mm-phyboard-polis-rdk-u-boot.dtsi   Fabio Estevam
• [PATCH] gw_ventana: Remove unneeded comments   Fabio Estevam
• [PATCH] imx: ele_ahab: Add HUK derivation support   Fabio Estevam
• [PATCH] mx6: Expand bmode to support ecspi3 boot   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240823   Fabio Estevam
• [PATCH v1 0/4] apalis/colibri imx8: enable additional features   Fabio Estevam
• [PATCH 1/3] tqma6: Remove non-DM board code   Fabio Estevam
• [PATCH v4] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Fabio Estevam
• [PATCH] ARM: imx: Use USB SDPS as fallback option on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH] ARM: imx: Enable cat and xxd commands on Data Modul i.MX8M Mini/Plus eDM SBC   Fabio Estevam
• [PATCH] imx: imx9: Set correct critical temperature   Fabio Estevam
• [PATCH 0/2] Add and enable mcore support   Fabio Estevam
• [PATCH v2] imx: ele_ahab: Add HUK derivation support   Fabio Estevam
• [GIT PULL v2] Please pull u-boot-imx-next-20240823   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240823   Fabio Estevam
• [PATCH 1/4] mx6slevk: Convert to watchdog driver model   Fabio Estevam
• [PATCH 2/4] mx6slevk: Fix the boot device number   Fabio Estevam
• [PATCH 3/4] mx6slevk: Keep a single defconfig   Fabio Estevam
• [PATCH 4/4] mx6slevk: Convert to OF_UPSTREAM   Fabio Estevam
• [PATCH] gw_ventana: Remove unneeded comments   Fabio Estevam
• [PATCH 1/3] imx: Remove CFG_MXC_USB_FLAGS   Fabio Estevam
• [PATCH 2/3] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH 3/3] imx: Remove CFG_MXC_USB_PORTSC   Fabio Estevam
• imx8ulp_evk build with buildman fails every other time   Fabio Estevam
• [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [Binman] Question regarding SPL symbol offsets generation   Fabio Estevam
• [PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Fabio Estevam
• [PATCH v2 1/4] imx: Remove CFG_MXC_USB_FLAGS   Fabio Estevam
• [PATCH v2 2/4] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH v2 3/4] mx5: Remove CFG_MXC_USB_PORT   Fabio Estevam
• [PATCH v2 4/4] imx: Remove CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH v2 4/4] imx: Remove CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH v2] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH v3 1/4] imx: Remove CFG_MXC_USB_FLAGS   Fabio Estevam
• [PATCH v3 2/4] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH v3 3/4] mx5: Remove CFG_MXC_USB_PORT   Fabio Estevam
• [PATCH v3 4/4] imx: Remove CFG_MXC_USB_PORTSC   Fabio Estevam
• [PATCH] ARM: imx: Enable MMU and dcache very early on i.MX8M   Fabio Estevam
• [PATCH v4] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Fabio Estevam
• [PATCH] ARM: imx: Wrap i.MX config options in HAVE_IMX   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20240829   Fabio Estevam
• [PATCH] mach-imx: do not use if_changed more than once per target   Fabio Estevam
• imx6ull-evk: Hanging with Ethernet enabled   Fabio Estevam
• imx6ull-evk: Hanging with Ethernet enabled   Fabio Estevam
• [PATCH] ARM: imx: Enable MMU and dcache very early on i.MX8M   Fabio Estevam
• [PATCH 1/5] tools: imx8image: fix soc variable for ULP   Peng Fan
• [PATCH 2/5] tools: imx8image: add upower image support   Peng Fan
• [PATCH 3/5] spl: binman: Disable u_boot_any symbols for i.MX 8ULP boards   Peng Fan
• [PATCH 4/5] mach-imx: Add i.MX 8ULP binman support   Peng Fan
• [PATCH 5/5] imx8ulp_evk: enable binman support   Peng Fan
• [PATCH] imx: imx8: fix build when CONFIG_IMX_BOOTAUX is set   Peng Fan
• [PATCH] mx6: Expand bmode to support ecspi3 boot   Peng Fan
• [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Peng Fan
• [PATCH v2 1/4] imx: Remove CFG_MXC_USB_FLAGS   Peng Fan
• [PATCH v2 2/4] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Peng Fan
• [PATCH v2 3/4] mx5: Remove CFG_MXC_USB_PORT   Peng Fan
• [PATCH 05/17] serial: serial_pl01x: Implement .getinfo() for PL01   Moritz Fischer
• [PATCH 06/17] acpi: Add define for GTDT   Moritz Fischer
• [PATCH 07/17] arm: acpi: Add generic ACPI methods   Moritz Fischer
• [PATCH] imx: imx9: Set correct critical temperature   Primoz Fiser
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Marcus Folkesson
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Marcus Folkesson
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Marcus Folkesson
• [PATCH 01/12] omap3: Define common SPL text base in Kconfig instead of defconfigs   Adam Ford
• [PATCH v5 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v5 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v6 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v6 01/20] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH v6 02/20] net: introduce alternative implementation as net-lwip/   Jerome Forissier
• [PATCH v6 03/20] configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y   Jerome Forissier
• [PATCH v6 04/20] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v6 05/20] net: split include/net.h into net{, -common, -legacy, -lwip}.h   Jerome Forissier
• [PATCH v6 06/20] net: eth-uclass: add function eth_start_udev()   Jerome Forissier
• [PATCH v6 07/20] net-lwip: build lwIP   Jerome Forissier
• [PATCH v6 08/20] net-lwip: add DHCP support and dhcp commmand   Jerome Forissier
• [PATCH v6 09/20] net-lwip: add TFTP support and tftpboot command   Jerome Forissier
• [PATCH v6 10/20] net-lwip: add ping command   Jerome Forissier
• [PATCH v6 11/20] net-lwip: add dns command   Jerome Forissier
• [PATCH v6 12/20] net: split cmd/net.c into cmd/net.c and cmd/net-common.c   Jerome Forissier
• [PATCH v6 13/20] net-lwip: add wget command   Jerome Forissier
• [PATCH v6 14/20] net-lwip: lwIP wget supports user defined port in the uri, so allow it.   Jerome Forissier
• [PATCH v6 15/20] cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y   Jerome Forissier
• [PATCH v6 16/20] configs: add qemu_arm64_lwip_defconfig   Jerome Forissier
• [PATCH v6 17/20] lwip: tftp: add support of blksize option to client   Jerome Forissier
• [PATCH v6 18/20] net-lwip: add TFTP_BLOCKSIZE   Jerome Forissier
• [PATCH v6 19/20] CI: add qemu_arm64_lwip to the test matrix   Jerome Forissier
• [PATCH v6 20/20] MAINTAINERS: net-lwip: add myself as a maintainer   Jerome Forissier
• [PATCH v7 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v7 01/20] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH v7 02/20] net: introduce alternative implementation as net-lwip/   Jerome Forissier
• [PATCH v7 03/20] configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y   Jerome Forissier
• [PATCH v7 04/20] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v7 05/20] net: split include/net.h into net{, -common, -legacy, -lwip}.h   Jerome Forissier
• [PATCH v7 06/20] net: eth-uclass: add function eth_start_udev()   Jerome Forissier
• [PATCH v7 07/20] net-lwip: build lwIP   Jerome Forissier
• [PATCH v7 08/20] net-lwip: add DHCP support and dhcp commmand   Jerome Forissier
• [PATCH v7 09/20] net-lwip: add TFTP support and tftpboot command   Jerome Forissier
• [PATCH v7 10/20] net-lwip: add ping command   Jerome Forissier
• [PATCH v7 11/20] net-lwip: add dns command   Jerome Forissier
• [PATCH v7 12/20] net: split cmd/net.c into cmd/net.c and cmd/net-common.c   Jerome Forissier
• [PATCH v7 13/20] net-lwip: add wget command   Jerome Forissier
• [PATCH v7 14/20] net-lwip: lwIP wget supports user defined port in the uri, so allow it.   Jerome Forissier
• [PATCH v7 15/20] cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y   Jerome Forissier
• [PATCH v7 16/20] configs: add qemu_arm64_lwip_defconfig   Jerome Forissier
• [PATCH v7 17/20] lwip: tftp: add support of blksize option to client   Jerome Forissier
• [PATCH v7 18/20] net-lwip: add TFTP_BLOCKSIZE   Jerome Forissier
• [PATCH v7 19/20] CI: add qemu_arm64_lwip to the test matrix   Jerome Forissier
• [PATCH v7 20/20] MAINTAINERS: net-lwip: add myself as a maintainer   Jerome Forissier
• [PATCH v7 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v7 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v7 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v7 08/20] net-lwip: add DHCP support and dhcp commmand   Jerome Forissier
• [PATCH v5 00/20] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 01/23] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH v8 02/23] net: wget: removed unused function wget_success()   Jerome Forissier
• [PATCH v8 03/23] net: wget: allow EFI boot   Jerome Forissier
• [PATCH v8 04/23] net: introduce alternative implementation as net-lwip/   Jerome Forissier
• [PATCH v8 05/23] configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y   Jerome Forissier
• [PATCH v8 06/23] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v8 07/23] net: split include/net.h into net{, -common, -legacy, -lwip}.h   Jerome Forissier
• [PATCH v8 08/23] net: eth-uclass: add function eth_start_udev()   Jerome Forissier
• [PATCH v8 09/23] net-lwip: build lwIP   Jerome Forissier
• [PATCH v8 10/23] net-lwip: add DHCP support and dhcp commmand   Jerome Forissier
• [PATCH v8 11/23] net-lwip: add TFTP support and tftpboot command   Jerome Forissier
• [PATCH v8 12/23] net-lwip: add ping command   Jerome Forissier
• [PATCH v8 13/23] net-lwip: add dns command   Jerome Forissier
• [PATCH v8 14/23] net: split cmd/net.c into cmd/net.c and cmd/net-common.c   Jerome Forissier
• [PATCH v8 15/23] net-lwip: add wget command   Jerome Forissier
• [PATCH v8 16/23] net-lwip: lwIP wget supports user defined port in the uri, so allow it.   Jerome Forissier
• [PATCH v8 17/23] cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y   Jerome Forissier
• [PATCH v8 18/23] configs: add qemu_arm64_lwip_defconfig   Jerome Forissier
• [PATCH v8 19/23] lwip: tftp: add support of blksize option to client   Jerome Forissier
• [PATCH v8 20/23] net-lwip: add TFTP_BLOCKSIZE   Jerome Forissier
• [PATCH v8 21/23] CI: add qemu_arm64_lwip to the test matrix   Jerome Forissier
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v8 23/23] MAINTAINERS: net-lwip: add myself as a maintainer   Jerome Forissier
• [PATCH v8 06/23] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 03/23] net: wget: allow EFI boot   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v8 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v9 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v9 01/37] Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word   Jerome Forissier
• [PATCH v9 02/37] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH v9 03/37] at91: rename mem_init() to at91_mem_init()   Jerome Forissier
• [PATCH v9 04/37] arm: omap2: add missing #include <netdev.h>   Jerome Forissier
• [PATCH v9 05/37] net: fm: call dtsec_init_phy() only when it is defined   Jerome Forissier
• [PATCH v9 06/37] net: wget: removed unused function wget_success()   Jerome Forissier
• [PATCH v9 07/37] net: phy: ncsi: depend on NET   Jerome Forissier
• [PATCH v9 08/37] net: ftgmac100: depend on NET   Jerome Forissier
• [PATCH v9 09/37] net: wget: allow EFI boot   Jerome Forissier
• [PATCH v9 10/37] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v9 11/37] test/py: net_boot: fix comment   Jerome Forissier
• [PATCH v9 12/37] test/py: test_efi_loader: add missing dependency on cmd_tftpboot   Jerome Forissier
• [PATCH v9 13/37] test/py: test_efi_loader: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v9 14/37] net: introduce alternative implementation as net-lwip/   Jerome Forissier
• [PATCH v9 15/37] configs: replace '# CONFIG_NET is not set' with CONFIG_NO_NET=y   Jerome Forissier
• [PATCH v9 16/37] net: split include/net.h into net{, -common, -legacy, -lwip}.h   Jerome Forissier
• [PATCH v9 17/37] net: move copy_filename() to new file net/net-common.c   Jerome Forissier
• [PATCH v9 18/37] net: eth-uclass: add function eth_start_udev()   Jerome Forissier
• [PATCH v9 19/37] net-lwip: build lwIP   Jerome Forissier
• [PATCH v9 20/37] net-lwip: add DHCP support and dhcp commmand   Jerome Forissier
• [PATCH v9 21/37] net-lwip: add TFTP support and tftpboot command   Jerome Forissier
• [PATCH v9 22/37] net-lwip: add ping command   Jerome Forissier
• [PATCH v9 23/37] net-lwip: add dns command   Jerome Forissier
• [PATCH v9 24/37] net: split cmd/net.c into cmd/net.c and cmd/net-common.c   Jerome Forissier
• [PATCH v9 25/37] net-lwip: add wget command   Jerome Forissier
• [PATCH v9 26/37] net-lwip: lwIP wget supports user defined port in the uri, so allow it.   Jerome Forissier
• [PATCH v9 27/37] cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y   Jerome Forissier
• [PATCH v9 28/37] configs: add qemu_arm64_lwip_defconfig   Jerome Forissier
• [PATCH v9 29/37] lwip: tftp: add support of blksize option to client   Jerome Forissier
• [PATCH v9 30/37] net-lwip: add TFTP_BLOCKSIZE   Jerome Forissier
• [PATCH v9 31/37] CI: add qemu_arm64_lwip to the test matrix   Jerome Forissier
• [PATCH v9 32/37] MAINTAINERS: net-lwip: add myself as a maintainer   Jerome Forissier
• [PATCH v9 33/37] Kconfig: fix undefined symbols (g_dnl*) when NET_LWIP is default enabled   Jerome Forissier
• [PATCH v9 34/37] configs: use syntax CONFIG_FOO=n in tools-only_defconfig   Jerome Forissier
• [PATCH v9 35/37] [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX   Jerome Forissier
• [PATCH v9 36/37] [TESTING] configs: set CONFIG_NET=y for FTGMAC100   Jerome Forissier
• [PATCH v9 37/37] [TESTING] configs: set CONFIG_NET=y when PXE is enabled   Jerome Forissier
• [PATCH v9 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH v9 34/37] configs: use syntax CONFIG_FOO=n in tools-only_defconfig   Jerome Forissier
• [PATCH v9 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH] doc/develop/sending_patches.rst: Clarify when to use which branch   Jerome Forissier
• imx8ulp_evk build with buildman fails every other time   Jerome Forissier
• [PATCH v9 00/23] Introduce the lwIP network stack   Jerome Forissier
• [PATCH 00/13] Miscellaneous fixes   Jerome Forissier
• [PATCH 01/13] Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word   Jerome Forissier
• [PATCH 02/13] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH 03/13] at91: rename mem_init() to at91_mem_init()   Jerome Forissier
• [PATCH 04/13] arm: omap2: add missing #include <netdev.h>   Jerome Forissier
• [PATCH 05/13] net: fm: call dtsec_init_phy() only when it is defined   Jerome Forissier
• [PATCH 06/13] net: wget: removed unused function wget_success()   Jerome Forissier
• [PATCH 07/13] net: phy: ncsi: depend on NET   Jerome Forissier
• [PATCH 08/13] net: ftgmac100: depend on NET   Jerome Forissier
• [PATCH 09/13] net: wget: allow EFI boot   Jerome Forissier
• [PATCH 10/13] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH 11/13] test/py: net_boot: fix comment   Jerome Forissier
• [PATCH 12/13] test/py: test_efi_loader: add missing dependency on cmd_tftpboot   Jerome Forissier
• [PATCH 13/13] test/py: test_efi_loader: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH] mach-imx: do not use if_changed more than once per target   Jerome Forissier
• imx8ulp_evk build with buildman fails every other time   Jerome Forissier
• [PATCH v9 18/37] net: eth-uclass: add function eth_start_udev()   Jerome Forissier
• [PATCH v9 35/37] [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX   Jerome Forissier
• [PATCH 05/13] net: fm: call dtsec_init_phy() only when it is defined   Jerome Forissier
• [PATCH v2 00/16] Miscellaneous fixes   Jerome Forissier
• [PATCH v2 01/16] Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word   Jerome Forissier
• [PATCH v2 02/16] buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set   Jerome Forissier
• [PATCH v2 03/16] flash: prefix error codes with FL_   Jerome Forissier
• [PATCH v2 04/16] at91: rename mem_init() to at91_mem_init()   Jerome Forissier
• [PATCH v2 05/16] arm: omap2: add missing #include <netdev.h>   Jerome Forissier
• [PATCH v2 06/16] net: fm: call dtsec_init_phy() only when it is defined   Jerome Forissier
• [PATCH v2 07/16] net: wget: removed unused function wget_success()   Jerome Forissier
• [PATCH v2 08/16] net: phy: ncsi: depend on NET   Jerome Forissier
• [PATCH v2 09/16] net: ftgmac100: depend on NET   Jerome Forissier
• [PATCH v2 10/16] net: wget: allow EFI boot   Jerome Forissier
• [PATCH v2 11/16] net: fec_mxc_init(): do not ignore return status of fec_open()   Jerome Forissier
• [PATCH v2 12/16] test/py: net_boot: fix comment   Jerome Forissier
• [PATCH v2 13/16] test/py: test_efi_loader: add missing dependency on cmd_tftpboot   Jerome Forissier
• [PATCH v2 14/16] test/py: test_efi_loader: add HTTP (wget) test for the EFI loader   Jerome Forissier
• [PATCH v2 15/16] common: update: UPDATE_COMMON implies CMD_TFTPBOOT   Jerome Forissier
• [PATCH v2 16/16] cmd: pxe: CMD_PXE implies CMD_TFTPBOOT   Jerome Forissier
• [PATCH] arm: dts: keystone: Move to OF_UPSTREAM   Neha Malcom Francis
• [PATCH] tools/scripts/Kconfig: Update references from kconfig-language.txt to rst   Hiago De Franco
• [PATCH] fs: Fix SPL build if SPL_FS_LOADER is enabled and FS_LOADER is disabled   Hiago De Franco
• [PATCH] configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS   Hiago De Franco
• [RFC PATCH 2/4] lmb: Tighten up the code in lmb_add_region_flags()   Sughosh Ganu
• [RFC PATCH 2/4] lmb: Tighten up the code in lmb_add_region_flags()   Sughosh Ganu
• [RFC PATCH 2/4] lmb: Tighten up the code in lmb_add_region_flags()   Sughosh Ganu
• [PATCH 30/40] sandbox: iommu: remove lmb allocation in the driver   Sughosh Ganu
• [PATCH 23/40] lmb: add a flags parameter to the API's   Sughosh Ganu
• [PATCH 23/40] lmb: add a flags parameter to the API's   Sughosh Ganu
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Sughosh Ganu
• [PATCH 23/40] lmb: add a flags parameter to the API's   Sughosh Ganu
• [PATCH 23/40] lmb: add a flags parameter to the API's   Sughosh Ganu
• [PATCH v2 00/32] Make LMB memory map global and persistent   Sughosh Ganu
• [PATCH v2 01/32] alist: add a helper to check if the list is full   Sughosh Ganu
• [PATCH v2 02/32] lmb: ut: disable unit tests for lmb changes   Sughosh Ganu
• [PATCH v2 03/32] lmb: remove the unused lmb_is_reserved() function   Sughosh Ganu
• [PATCH v2 04/32] lmb: staticize __lmb_alloc_base()   Sughosh Ganu
• [PATCH v2 05/32] lmb: use the BIT macro for lmb flags   Sughosh Ganu
• [PATCH v2 06/32] lmb: make LMB memory map persistent and global   Sughosh Ganu
• [PATCH v2 07/32] lmb: allow for resizing lmb regions   Sughosh Ganu
• [PATCH v2 08/32] lmb: remove config symbols used for lmb region count   Sughosh Ganu
• [PATCH v2 09/32] test: lmb: remove the test for max regions   Sughosh Ganu
• [PATCH v2 10/32] lmb: config: add lmb config symbols for SPL   Sughosh Ganu
• [PATCH v2 11/32] lmb: allow lmb module to be used in SPL   Sughosh Ganu
• [PATCH v2 12/32] lmb: remove the lmb_init_and_reserve() function   Sughosh Ganu
• [PATCH v2 13/32] lmb: remove lmb_init_and_reserve_range() function   Sughosh Ganu
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v2 15/32] lmb: reserve common areas during board init   Sughosh Ganu
• [PATCH v2 16/32] lmb: bootm: remove superfluous lmb stub functions   Sughosh Ganu
• [PATCH v2 17/32] lmb: init: initialise the lmb data structures during board init   Sughosh Ganu
• [PATCH v2 18/32] lmb: add a common implementation of arch_lmb_reserve()   Sughosh Ganu
• [PATCH v2 19/32] sandbox: move the TCG event log to the start of ram memory   Sughosh Ganu
• [PATCH v2 20/32] spl: call spl_board_init() at the end of the spl init sequence   Sughosh Ganu
• [PATCH v2 21/32] spl: sandbox: initialise the ram banksize in spl   Sughosh Ganu
• [PATCH v2 22/32] sandbox: spl: enable lmb config for SPL   Sughosh Ganu
• [PATCH v2 23/32] sandbox: iommu: remove lmb allocation in the driver   Sughosh Ganu
• [PATCH v2 24/32] zynq: lmb: do not add to lmb map before relocation   Sughosh Ganu
• [PATCH v2 25/32] stm32mp: allow calling optee_get_reserved_memory() from U-Boot   Sughosh Ganu
• [PATCH v2 26/32] stm32mp: compute ram_top based on the optee base address   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 28/32] test: lmb: tweak the tests for the persistent lmb memory map   Sughosh Ganu
• [PATCH v2 29/32] test: bdinfo: dump the global LMB memory map   Sughosh Ganu
• [PATCH v2 30/32] sandbox: adjust load address of couple of tests   Sughosh Ganu
• [PATCH v2 31/32] lmb: ut: re-enable unit tests   Sughosh Ganu
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Sughosh Ganu
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Sughosh Ganu
• [PATCH 18/40] lmb: remove the lmb_init_and_reserve() function   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 18/32] lmb: add a common implementation of arch_lmb_reserve()   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Sughosh Ganu
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v3 00/27] Make LMB memory map global and persistent   Sughosh Ganu
• [PATCH v3 01/27] alist: add a helper to check if the list is full   Sughosh Ganu
• [PATCH v3 02/27] lmb: remove the unused lmb_is_reserved() function   Sughosh Ganu
• [PATCH v3 03/27] lmb: staticize __lmb_alloc_base()   Sughosh Ganu
• [PATCH v3 04/27] lmb: use the BIT macro for lmb flags   Sughosh Ganu
• [PATCH v3 05/27] lmb: make LMB memory map persistent and global   Sughosh Ganu
• [PATCH v3 06/27] lmb: allow for resizing lmb regions   Sughosh Ganu
• [PATCH v3 07/27] lmb: remove config symbols used for lmb region count   Sughosh Ganu
• [PATCH v3 08/27] lmb: config: add lmb config symbols for SPL   Sughosh Ganu
• [PATCH v3 09/27] lmb: allow lmb module to be used in SPL   Sughosh Ganu
• [PATCH v3 10/27] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v3 11/27] lmb: reserve common areas during board init   Sughosh Ganu
• [PATCH v3 12/27] lmb: remove the lmb_init_and_reserve() function   Sughosh Ganu
• [PATCH v3 13/27] lmb: remove lmb_init_and_reserve_range() function   Sughosh Ganu
• [PATCH v3 14/27] lmb: bootm: remove superfluous lmb stub functions   Sughosh Ganu
• [PATCH v3 15/27] lmb: init: initialise the lmb data structures during board init   Sughosh Ganu
• [PATCH v3 16/27] ppc: lmb: move arch specific lmb reservations to arch_misc_init()   Sughosh Ganu
• [PATCH v3 17/27] lmb: do away with arch_lmb_reserve()   Sughosh Ganu
• [PATCH v3 18/27] lmb: remove the unused board_lmb_reserve() function   Sughosh Ganu
• [PATCH v3 19/27] sandbox: move the TCG event log to the start of ram memory   Sughosh Ganu
• [PATCH v3 20/27] spl: call spl_board_init() at the end of the spl init sequence   Sughosh Ganu
• [PATCH v3 21/27] spl: sandbox: initialise the ram banksize in spl   Sughosh Ganu
• [PATCH v3 22/27] sandbox: spl: enable lmb config for SPL   Sughosh Ganu
• [PATCH v3 23/27] sandbox: iommu: remove lmb allocation in the driver   Sughosh Ganu
• [PATCH v3 24/27] zynq: lmb: do not add to lmb map before relocation   Sughosh Ganu
• [PATCH v3 25/27] stm32mp: allow calling optee_get_reserved_memory() from U-Boot   Sughosh Ganu
• [PATCH v3 26/27] stm32mp: compute ram_top based on the optee base address   Sughosh Ganu
• [PATCH v3 27/27] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v3 00/27] Make LMB memory map global and persistent   Sughosh Ganu
• [PATCH v3 17/27] lmb: do away with arch_lmb_reserve()   Sughosh Ganu
• [PATCH v4 00/27] Make LMB memory map global and persistent   Sughosh Ganu
• [PATCH v4 01/27] alist: add a helper to check if the list is full   Sughosh Ganu
• [PATCH v4 02/27] lmb: remove the unused lmb_is_reserved() function   Sughosh Ganu
• [PATCH v4 03/27] lmb: staticize __lmb_alloc_base()   Sughosh Ganu
• [PATCH v4 04/27] lmb: use the BIT macro for lmb flags   Sughosh Ganu
• [PATCH v4 05/27] lmb: make LMB memory map persistent and global   Sughosh Ganu
• [PATCH v4 06/27] lmb: allow for resizing lmb regions   Sughosh Ganu
• [PATCH v4 07/27] lmb: remove config symbols used for lmb region count   Sughosh Ganu
• [PATCH v4 08/27] lmb: config: add lmb config symbols for SPL   Sughosh Ganu
• [PATCH v4 09/27] lmb: allow lmb module to be used in SPL   Sughosh Ganu
• [PATCH v4 10/27] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
• [PATCH v4 11/27] lmb: reserve common areas during board init   Sughosh Ganu
• [PATCH v4 12/27] lmb: remove the lmb_init_and_reserve() function   Sughosh Ganu
• [PATCH v4 13/27] lmb: remove lmb_init_and_reserve_range() function   Sughosh Ganu
• [PATCH v4 14/27] lmb: bootm: remove superfluous lmb stub functions   Sughosh Ganu
• [PATCH v4 15/27] lmb: init: initialise the lmb data structures during board init   Sughosh Ganu
• [PATCH v4 16/27] ppc: lmb: move arch specific lmb reservations to arch_misc_init()   Sughosh Ganu
• [PATCH v4 17/27] lmb: do away with arch_lmb_reserve()   Sughosh Ganu
• [PATCH v4 18/27] lmb: remove the unused board_lmb_reserve() function   Sughosh Ganu
• [PATCH v4 19/27] sandbox: move the TCG event log to the start of ram memory   Sughosh Ganu
• [PATCH v4 20/27] spl: call spl_board_init() at the end of the spl init sequence   Sughosh Ganu
• [PATCH v4 21/27] spl: sandbox: initialise the ram banksize in spl   Sughosh Ganu
• [PATCH v4 22/27] sandbox: spl: enable lmb config for SPL   Sughosh Ganu
• [PATCH v4 23/27] sandbox: iommu: remove lmb allocation in the driver   Sughosh Ganu
• [PATCH v4 24/27] zynq: lmb: do not add to lmb map before relocation   Sughosh Ganu
• [PATCH v4 25/27] stm32mp: allow calling optee_get_reserved_memory() from U-Boot   Sughosh Ganu
• [PATCH v4 26/27] stm32mp: compute ram_top based on the optee base address   Sughosh Ganu
• [PATCH v4 27/27] lmb: add logic to print lmb flag strings   Sughosh Ganu
• [PATCH v2] list: use list_count_nodes() to count list entries   Sughosh Ganu
• [PATCH 17/18] rockchip: mmc: Fix a missing colon   Sughosh Ganu
• [PATCH 0/6] Miscellaneous FWU fixes   Sughosh Ganu
• [PATCH 1/6] fwu: v2: perform some checks before reading metadata   Sughosh Ganu
• [PATCH 2/6] fwu: v2: try reading both copies of metadata   Sughosh Ganu
• [PATCH 3/6] fwu: v1: do a version check for the metadata   Sughosh Ganu
• [PATCH 4/6] fwu: check all images for transitioning out of Trial State   Sughosh Ganu
• [PATCH 5/6] fwu: add dependency checks for selecting FWU metadata version   Sughosh Ganu
• [PATCH 6/6] fwu: do not allow capsule processing on exceeding Trial Counter threshold   Sughosh Ganu
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Sumit Garg
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Sumit Garg
• [PATCH v4 10/10] dts: upstream: src: arm64: ti: k3-am62x-sk-common: Sync DT with Linux v6.11-rc3   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• [PATCH v5 10/10] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• OF_UPSTREAM vs. additional dtbs   Sumit Garg
• [PATCH v4 7/9] dts: starfive: Add JH7110 Cadence USB dts node   Sumit Garg
• [PATCH v1] dm: core: Make SPL_DM_SEQ_ALIAS select SPL_STRTO   Gaskell, Oliver
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Gaskell, Oliver
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Gaskell, Oliver
• [PATCH v9 7/8] rockchip: Ensure memory size is available in RK3399 SPL   Simon Glass
• [PATCH v9 8/8] rockchip: Avoid #ifdefs in RK3399 SPL   Simon Glass
• [PATCH v8 8/8] rockchip: Avoid #ifdefs in RK3399 SPL   Simon Glass
• [RFC] rockchip: rk3399: Migrate to use TPL on bob and kevin   Simon Glass
• [PATCH v2] boot: android: fix booting without a ramdisk   Simon Glass
• [PATCH v2] bootstage: Fix out-of-bounds read in reloc_bootstage()   Simon Glass
• [RFC PATCH 2/4] dm: core: Show device sequence instead in dm_dump_tree()   Simon Glass
• [RFC PATCH 3/4] cmd: bind: Use device sequence instead for driver bind/unbind   Simon Glass
• [RFC PATCH 0/4] dm: Duplicate uclass name fix and alias improvements   Simon Glass
• [PATCH] list: use list_count_nodes() to count list entries   Simon Glass
• [PATCHv4 10/14] cmd: cpu: add release subcommand   Simon Glass
• [RFC PATCH 2/4] lmb: Tighten up the code in lmb_add_region_flags()   Simon Glass
• [PATCH 5/6] efi: Use malloc() for the EFI pool   Simon Glass
• [PATCH v2] bootstage: Fix out-of-bounds read in reloc_bootstage()   Simon Glass
• [PATCH v2 0/3] efi: Start tidying up memory management   Simon Glass
• [PATCH v2 1/3] efi: Allow use of malloc() for the EFI pool   Simon Glass
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Simon Glass
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Simon Glass
• [PATCH 5/6] efi: Use malloc() for the EFI pool   Simon Glass
• [RFC PATCH 2/4] lmb: Tighten up the code in lmb_add_region_flags()   Simon Glass
• [RFC PATCH 0/4] dm: Duplicate uclass name fix and alias improvements   Simon Glass
• [PATCH v2 00/39] efi: Add a test for EFI bootmeth   Simon Glass
• [PATCH v2 01/39] nvmxip: Drop the message on probe   Simon Glass
• [PATCH v2 02/39] nvmxip: Avoid probing on boot   Simon Glass
• [PATCH v2 03/39] bootstd: Add UT_TESTF_CONSOLE_REC to bootflow tests   Simon Glass
• [PATCH v2 04/39] test/py: Fix some pylint warnings in test_ut.py   Simon Glass
• [PATCH v2 05/39] scripts: Update pylint.base   Simon Glass
• [PATCH v2 06/39] bootstd: Create a function to reset USB   Simon Glass
• [PATCH v2 07/39] usb: Drop old non-DM code   Simon Glass
• [PATCH v2 08/39] log: Add a new log category for the console   Simon Glass
• [PATCH v2 09/39] usb: Add DEV_FLAGS_DM to stdio for USB keyboard   Simon Glass
• [PATCH v2 10/39] dm: usb: Deal with USB keyboard persisting across tests   Simon Glass
• [PATCH v2 11/39] test: mbr: Adjust test to use lower-case hex   Simon Glass
• [PATCH v2 12/39] test: mbr: Adjust test to drop 0x   Simon Glass
• [PATCH v2 13/39] sandbox: Change the range used for memory-mapping tags   Simon Glass
• [PATCH v2 14/39] sandbox: Update cpu to use logging   Simon Glass
• [PATCH v2 15/39] sandbox: Unmap old tags   Simon Glass
• [PATCH v2 16/39] sandbox: Add some debugging to pci_io   Simon Glass
• [PATCH v2 17/39] sandbox: Implement reference counting for address mapping   Simon Glass
• [PATCH v2 18/39] mmc: Use map_sysmem() with buffers in the mmc command   Simon Glass
• [PATCH v2 19/39] read: Use map_sysmem() with buffers in the read command   Simon Glass
• [PATCH v2 20/39] cmd: Fix memory-mapping in cmp command   Simon Glass
• [PATCH v2 21/39] test: mbr: Unmap the buffers after use   Simon Glass
• [PATCH v2 22/39] test: mbr: Use a constant for the block size   Simon Glass
• [PATCH v2 23/39] test: mbr: Use RAM for the buffers   Simon Glass
• [PATCH v2 24/39] test: mbr: Drop a duplicate test   Simon Glass
• [PATCH v2 25/39] efi: Use puts() in cout so that console recording works   Simon Glass
• [PATCH v2 26/39] efi_loader: Put back copyright message   Simon Glass
• [PATCH v2 27/39] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE   Simon Glass
• [PATCH v2 28/39] efi_loader: Shorten the app rules   Simon Glass
• [PATCH v2 29/39] efi_loader: Shorten the app rules further   Simon Glass
• [PATCH v2 30/39] efi: Show the vendor in helloworld   Simon Glass
• [PATCH v2 31/39] Revert "bootdev: avoid infinite probe loop"   Simon Glass
• [PATCH v2 32/39] bootstd: Make bootdev_next_prio() continue after failure   Simon Glass
• [PATCH v2 33/39] efi: Use the same filename for all sandbox builds   Simon Glass
• [PATCH v2 34/39] bootstd: Add debugging for efi bootmeth   Simon Glass
• [PATCH v2 35/39] efi: Disable ANSI output for tests   Simon Glass
• [PATCH v2 36/39] efi: Add a test app   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH v2 38/39] test: Set up an image suitable for EFI testing   Simon Glass
• [PATCH v2 39/39] efi: Add a test for the efi bootmeth   Simon Glass
• [PATCH v7 00/20] Introduce the lwIP network stack   Simon Glass
• [PATCH v4 1/5] x86: provide mb() macro   Simon Glass
• [PATCH 30/40] sandbox: iommu: remove lmb allocation in the driver   Simon Glass
• [PATCH 05/14] initcall: Adjust the failure message and return value   Simon Glass
• [PATCH 1/4] x86: Fix ptrdiff_t for x86_64   Simon Glass
• [PATCH 2/4] dlmalloc: Fix integer overflow in request2size()   Simon Glass
• [PATCH 3/4] dlmalloc: Fix integer overflow in sbrk()   Simon Glass
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Simon Glass
• [PATCH] dm: core: Show device sequence instead in dm_dump_tree()   Simon Glass
• [PATCH] cmd: bind: Use device sequence instead for driver bind/unbind   Simon Glass
• Selecting serial device for console   Simon Glass
• [PATCH 1/1] Makefile: don't use CFLAGS for environment text file   Simon Glass
• [PATCH 4/4] dlmalloc: Make sure allocation size is within malloc area   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [PATCH 23/40] lmb: add a flags parameter to the API's   Simon Glass
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [PATCH 1/3] dm: core: fdtaddr: Avoid multiple calls to fdt_parent_offset()   Simon Glass
• [PATCH 2/3] dm: core: ofnode: Avoid multiple calls to ofnode_get_parent()   Simon Glass
• [PATCH v2 2/3] tools: binman: Add a property to pass a key directory to mkimage   Simon Glass
• [PATCH v7 00/20] Introduce the lwIP network stack   Simon Glass
• [PATCH 3/3] dm: core: regmap: Avoid multiple calls to ofnode_get_parent()   Simon Glass
• [PATCH v2 1/3] aes: Allow to store randomly generated IV in the FIT   Simon Glass
• [PATCH v2 3/3] tools: binman: Add tests for FIT with data encrypted by mkimage   Simon Glass
• Fw: ECDSA for FIT Files in U-Boot   Simon Glass
• [PATCH v2 00/21] Universal Payload initial series   Simon Glass
• [PATCH] configs: enable efidebug and EFI http boot on QEMU aarch64   Simon Glass
• [PATCH v2 1/1] board: tegra: convert boards to text env   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Simon Glass
• [PATCH 1/1] efi_loader: correct description of efi_get_distro_fdt_name   Simon Glass
• [PATCH v2 36/39] efi: Add a test app   Simon Glass
• [PATCH v2 06/39] bootstd: Create a function to reset USB   Simon Glass
• Fw: ECDSA for FIT Files in U-Boot   Simon Glass
• [PATCH 0/6] bootstd: sunxi: Migrate to standard boot   Simon Glass
• [PATCH 1/6] sunxi: Drop BOOTCMD_SUNXI_COMPAT   Simon Glass
• [PATCH 2/6] sunxi: Add a bootmeth for FEL   Simon Glass
• [PATCH 3/6] sunxi: Move to bootstd   Simon Glass
• [PATCH 4/6] sunxi: Drop old distro boot variables   Simon Glass
• [PATCH 5/6] env: Provide a work-around for unquoting fdtfile   Simon Glass
• [PATCH 6/6] sunxi: Move to text environment   Simon Glass
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [PATCH v4 00/21] Universal Payload initial series   Simon Glass
• [PATCH v4 01/21] sandbox: Use const in os_jump_to_file()   Simon Glass
• [PATCH v4 02/21] sandbox: Fix a comment in os_find_u_boot()   Simon Glass
• [PATCH v4 03/21] test: Move some SPL-loading test-code into sandbox common   Simon Glass
• [PATCH v4 04/21] fdt: Don't overwrite bloblist devicetree   Simon Glass
• [PATCH v4 05/21] sandbox: fdt: Avoid overwriting an existing fdt   Simon Glass
• [PATCH v4 06/21] sandbox: Return error code from read/write/seek   Simon Glass
• [PATCH v4 07/21] sandbox: Add ELF file to VPL u-boot.img   Simon Glass
• [PATCH v4 08/21] sandbox: Set up global_data earlier   Simon Glass
• [PATCH v4 09/21] upl: Add support for reading a upl handoff   Simon Glass
• [PATCH v4 10/21] upl: Add support for writing a upl handoff   Simon Glass
• [PATCH v4 11/21] upl: Add basic tests   Simon Glass
• [PATCH v4 12/21] upl: Add a command   Simon Glass
• [PATCH v4 13/21] upl: Add support for Universal Payload in SPL   Simon Glass
• [PATCH v4 14/21] spl: Set SPL_FIT_FOUND for full FIT also   Simon Glass
• [PATCH v4 15/21] spl: Plumb in the Universal Payload handoff   Simon Glass
• [PATCH v4 16/21] upl: Plumb in universal payload to the init process   Simon Glass
• [PATCH v4 17/21] sandbox_vpl: Enable Universal Payload   Simon Glass
• [PATCH v4 18/21] upl: Add initial documentation   Simon Glass
• [PATCH v4 19/21] sandbox: Add a flag to enable UPL   Simon Glass
• [PATCH v4 20/21] sandbox: Add an SPL loader for UPL   Simon Glass
• [PATCH v4 21/21] upl: Add an end-to-end test   Simon Glass
• pinctrl warning on sandbox   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [Binman] Question regarding SPL symbol offsets generation   Simon Glass
• Selecting serial device for console   Simon Glass
• [PATCH 23/40] lmb: add a flags parameter to the API's   Simon Glass
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH] cmd: add a fetch utility   Simon Glass
• pinctrl warning on sandbox   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [PATCH] sf: Add lock info option to sf command list   Simon Glass
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Simon Glass
• [PATCH 23/40] lmb: add a flags parameter to the API's   Simon Glass
• [PATCH] env: remove vars that are not in default env   Simon Glass
• [PATCH v3 19/19] CI: Allow running tests on sjg lab   Simon Glass
• [PATCH v2 0/3] efi: Start tidying up memory management   Simon Glass
• [PATCH] cmd: add a fetch utility   Simon Glass
• [PATCH v2 1/3] efi: Allow use of malloc() for the EFI pool   Simon Glass
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Simon Glass
• [PATCH 00/20] i2c: Chip away at some old code   Simon Glass
• [PATCH 00/21] Tidy up console recording in tests   Simon Glass
• [PATCH 01/21] buildman: Make test_process_limit handle time.monotonic()   Simon Glass
• [PATCH 02/21] test: Fail when an empty line is expected but not present   Simon Glass
• [PATCH 03/21] test: Rename unit-test flags   Simon Glass
• [PATCH 04/21] test: Drop the blank line before test macros   Simon Glass
• [PATCH 05/21] test: Rename UTF_CONSOLE_REC to UTF_CONSOLE   Simon Glass
• [PATCH 06/21] mmc: Drop the blank line before accesses   Simon Glass
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Simon Glass
• [PATCH 08/21] sandbox: Enable wget command   Simon Glass
• [PATCH 09/21] test: Update NAND test to avoid extra macros   Simon Glass
• [PATCH 10/21] test: bloblist: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 11/21] test: boot: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 12/21] test: fdt: Check internal-function return values   Simon Glass
• [PATCH 13/21] test: fdt: Move common code into the setup functions   Simon Glass
• [PATCH 14/21] test: cmd: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 15/21] test: cmd: Drop unnecessary console_record_reset_enable()   Simon Glass
• [PATCH 16/21] test: dm: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 17/21] test: hush: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 18/21] test: log: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH 19/21] test: Use UTF_CONSOLE in remaining tests   Simon Glass
• [PATCH 20/21] test: Tidy up checking for console end   Simon Glass
• [PATCH 21/21] doc: Add a few notes about how to use console checking   Simon Glass
• [PATCH v3 00/15] spl: mmc: Some tweaks for SPL, particularly with MMC   Simon Glass
• [PATCH v3 01/15] configs: Resync with savedefconfig   Simon Glass
• [PATCH v3 02/15] rockchip: Move the default timer init to a common file   Simon Glass
• [PATCH v3 03/15] spl: Correct use of CMD_BOOTI and CMD_BOOTZ   Simon Glass
• [PATCH v3 04/15] spl: Remove some #ifdefs in spl_parse_image_header()   Simon Glass
• [PATCH v3 05/15] spl: Remove remaining #ifdef in spl_parse_image_header()   Simon Glass
• [PATCH v3 06/15] mmc: Use logging instead of printf()   Simon Glass
• [PATCH v3 07/15] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v3 08/15] log: Avoid including function names by default   Simon Glass
• [PATCH v3 09/15] spl: mmc: Drop checks for CONFIG_SPL_LIBCOMMON_SUPPORT   Simon Glass
• [PATCH v3 10/15] spl: mmc: Handle error codes consistently   Simon Glass
• [PATCH v3 11/15] spl: mmc: Adjust args of spl_mmc_find_device()   Simon Glass
• [PATCH v3 12/15] spl: mmc: Try to clean up raw-mode options   Simon Glass
• [PATCH v3 13/15] spl: Use unified inline functions for spl_load_info   Simon Glass
• [PATCH v3 14/15] spl: Create a function to init spl_load_info   Simon Glass
• [PATCH v3 15/15] blk: Correct comment for blk_get_devnum_by_uclass_idname()   Simon Glass
• [PATCH v2] env: remove vars that are not in default env   Simon Glass
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Simon Glass
• [PATCH] pinmux: generic: Use ENOENT instead of ENOSYS   Simon Glass
• [PATCH] sandbox: Fix pinmux warnings with non-test devicetrees   Simon Glass
• [PATCH v4 00/21] Universal Payload initial series   Simon Glass
• I think I found a typographical error   Simon Glass
• [PATCH v2 04/14] spl: Remove remaining #ifdef in spl_parse_image_header()   Simon Glass
• [PATCH v2 05/14] mmc: Use logging instead of printf()   Simon Glass
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v2 07/14] log: Avoid including function names by default   Simon Glass
• [PATCH v2 11/14] spl: mmc: Try to clean up raw-mode options   Simon Glass
• [PATCH v2 36/39] efi: Add a test app   Simon Glass
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Simon Glass
• [PATCH v2 06/39] bootstd: Create a function to reset USB   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• Selecting serial device for console   Simon Glass
• [PATCH v2 00/18] i2c: Chip away at some old code   Simon Glass
• [PATCH v2 01/18] i2c: Remove board_i2c_init()   Simon Glass
• [PATCH v2 02/18] i2c: Remove IC2_xxx enum   Simon Glass
• [PATCH v2 03/18] i2c: Remove CFG_I2C_MULTI_BUS   Simon Glass
• [PATCH v2 04/18] mips: malta: Drop CMD_DATE   Simon Glass
• [PATCH v2 05/18] armv8: ls2085a: Drop CMD_DATE   Simon Glass
• [PATCH v2 06/18] mx28 / mx51: Drop CMD_DATE   Simon Glass
• [PATCH v2 07/18] MPC837XERDB: ethernut5: work_92105: Drop CMD_DATE   Simon Glass
• [PATCH v2 08/18] rtc: Drop CFG_SYS_RTC_BUS_NUM   Simon Glass
• [PATCH v2 09/18] date: Drop the legacy I2C code   Simon Glass
• [PATCH v2 10/18] fsl: mxc: Drop legacy I2c   Simon Glass
• [PATCH v2 11/18] i2c: Drop reference to SYS_I2C_INIT_BOARD   Simon Glass
• [PATCH v2 12/18] octeon: Drop OCTEON_I2C_FDT dead code   Simon Glass
• [PATCH v2 13/18] i2c: Remove I2C_SET_BUS()   Simon Glass
• [PATCH v2 14/18] i2c: Remove I2C_GET_BUS()   Simon Glass
• [PATCH v2 15/18] i2c: Drop CFG_SYS_MAX_I2C_BUS   Simon Glass
• [PATCH v2 16/18] i2c: Drop i2c_get_bus_num_fdt() and i2c_reset_port_fdt()   Simon Glass
• [PATCH v2 17/18] i2c: Remove CFG_SYS_I2C_MAX_HOPS   Simon Glass
• [PATCH v2 18/18] i2c: Remove CFG_SYS_I2C_DIRECT_BUS   Simon Glass
• [PATCH v3 00/40] efi: Add a test for EFI bootmeth   Simon Glass
• [PATCH v3 01/40] nvmxip: Drop the message on probe   Simon Glass
• [PATCH v3 02/40] nvmxip: Avoid probing on boot   Simon Glass
• [PATCH v3 03/40] bootstd: Add UT_TESTF_CONSOLE_REC to bootflow tests   Simon Glass
• [PATCH v3 04/40] test/py: Fix some pylint warnings in test_ut.py   Simon Glass
• [PATCH v3 05/40] scripts: Update pylint.base   Simon Glass
• [PATCH v3 06/40] bootstd: Create a function to reset USB   Simon Glass
• [PATCH v3 07/40] usb: Drop old non-DM code   Simon Glass
• [PATCH v3 08/40] log: Add a new log category for the console   Simon Glass
• [PATCH v3 09/40] usb: Add DEV_FLAGS_DM to stdio for USB keyboard   Simon Glass
• [PATCH v3 10/40] dm: usb: Deal with USB keyboard persisting across tests   Simon Glass
• [PATCH v3 11/40] test: mbr: Adjust test to use lower-case hex   Simon Glass
• [PATCH v3 12/40] test: mbr: Adjust test to drop 0x   Simon Glass
• [PATCH v3 13/40] sandbox: Change the range used for memory-mapping tags   Simon Glass
• [PATCH v3 14/40] sandbox: Update cpu to use logging   Simon Glass
• [PATCH v3 15/40] sandbox: Unmap old tags   Simon Glass
• [PATCH v3 16/40] sandbox: Add some debugging to pci_io   Simon Glass
• [PATCH v3 17/40] sandbox: Implement reference counting for address mapping   Simon Glass
• [PATCH v3 18/40] mmc: Use map_sysmem() with buffers in the mmc command   Simon Glass
• [PATCH v3 19/40] read: Tidy up use of map_sysmem() in the read command   Simon Glass
• [PATCH v3 20/40] cmd: Fix memory-mapping in cmp command   Simon Glass
• [PATCH v3 21/40] test: mbr: Unmap the buffers after use   Simon Glass
• [PATCH v3 22/40] test: mbr: Use a constant for the block size   Simon Glass
• [PATCH v3 23/40] test: mbr: Use RAM for the buffers   Simon Glass
• [PATCH v3 24/40] test: mbr: Drop a duplicate test   Simon Glass
• [PATCH v3 25/40] efi: Use puts() in cout so that console recording works   Simon Glass
• [PATCH v3 26/40] efi_loader: Put back copyright message   Simon Glass
• [PATCH v3 27/40] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE   Simon Glass
• [PATCH v3 28/40] efi: arm: x86: riscv: Drop crt0/relocal extra- rules   Simon Glass
• [PATCH v3 29/40] efi_loader: Shorten the app rules   Simon Glass
• [PATCH v3 30/40] efi_loader: Shorten the app rules further   Simon Glass
• [PATCH v3 31/40] efi: Show the vendor in helloworld   Simon Glass
• [PATCH v3 32/40] Revert "bootdev: avoid infinite probe loop"   Simon Glass
• [PATCH v3 33/40] bootstd: Make bootdev_next_prio() continue after failure   Simon Glass
• [PATCH v3 34/40] efi: Use the same filename for all sandbox builds   Simon Glass
• [PATCH v3 35/40] bootstd: Add debugging for efi bootmeth   Simon Glass
• [PATCH v3 36/40] efi: Disable ANSI output for tests   Simon Glass
• [PATCH v3 37/40] efi: Add a test app   Simon Glass
• [PATCH v3 38/40] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH v3 39/40] test: Set up an image suitable for EFI testing   Simon Glass
• [PATCH v3 40/40] efi: Add a test for the efi bootmeth   Simon Glass
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Simon Glass
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v3 01/15] configs: Resync with savedefconfig   Simon Glass
• [PATCH v3 06/15] mmc: Use logging instead of printf()   Simon Glass
• [PATCH v3 31/40] efi: Show the vendor in helloworld   Simon Glass
• [PATCH 0/6] bootstd: sunxi: Migrate to standard boot   Simon Glass
• [PATCH v3] env: remove vars that are not in default env   Simon Glass
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Simon Glass
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Simon Glass
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Simon Glass
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Simon Glass
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Simon Glass
• [PATCH 23/40] lmb: add a flags parameter to the API's   Simon Glass
• [PATCH v3 00/40] efi: Add a test for EFI bootmeth   Simon Glass
• [PATCH v3 0/3] This series adds a few patches to make it easy to use the system dtc in   Simon Glass
• [PATCH v3 1/3] buildman: Support building within a Python venv   Simon Glass
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Simon Glass
• [PATCH v3 3/3] RFC: CI: Skip building dtc for world builds   Simon Glass
• [PATCH v4 00/14] efi: Add a test for EFI bootmeth   Simon Glass
• [PATCH v4 01/14] efi_loader: Use puts() in cout so that console recording works   Simon Glass
• [PATCH v4 02/14] efi_loader: Put back copyright message   Simon Glass
• [PATCH v4 03/14] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE   Simon Glass
• [PATCH v4 04/14] efi: arm: x86: riscv: Drop crt0/relocal extra- rules   Simon Glass
• [PATCH v4 05/14] efi_loader: Shorten the app rules   Simon Glass
• [PATCH v4 06/14] efi_loader: Shorten the app rules further   Simon Glass
• [PATCH v4 07/14] efi_loader: Show the vendor in helloworld   Simon Glass
• [PATCH v4 08/14] efi: Use the same filename for all sandbox builds   Simon Glass
• [PATCH v4 09/14] bootstd: Add debugging for efi bootmeth   Simon Glass
• [PATCH v4 10/14] efi_loader: Disable ANSI output for tests   Simon Glass
• [PATCH v4 11/14] efi_loader: Add a test app   Simon Glass
• [PATCH v4 12/14] efi_loader: Avoid using sandbox virtio devices   Simon Glass
• [PATCH v4 13/14] test: efi: boot: Set up an image suitable for EFI testing   Simon Glass
• [PATCH v4 14/14] test: efi: boot: Add a test for the efi bootmeth   Simon Glass
• [PATCH v3 00/24] Fix various bugs   Simon Glass
• [PATCH v3 01/24] nvmxip: Drop the message on probe   Simon Glass
• [PATCH v3 02/24] nvmxip: Avoid probing on boot   Simon Glass
• [PATCH v3 03/24] bootstd: Add UT_TESTF_CONSOLE_REC to bootflow tests   Simon Glass
• [PATCH v3 04/24] test/py: Fix some pylint warnings in test_ut.py   Simon Glass
• [PATCH v3 05/24] scripts: Update pylint.base   Simon Glass
• [PATCH v3 06/24] bootstd: Create a function to reset USB   Simon Glass
• [PATCH v3 07/24] usb: Drop old non-DM code   Simon Glass
• [PATCH v3 08/24] log: Add a new log category for the console   Simon Glass
• [PATCH v3 09/24] usb: Add DEV_FLAGS_DM to stdio for USB keyboard   Simon Glass
• [PATCH v3 10/24] dm: usb: Deal with USB keyboard persisting across tests   Simon Glass
• [PATCH v3 11/24] test: mbr: Adjust test to use lower-case hex   Simon Glass
• [PATCH v3 12/24] test: mbr: Adjust test to drop 0x   Simon Glass
• [PATCH v3 13/24] sandbox: Change the range used for memory-mapping tags   Simon Glass
• [PATCH v3 14/24] sandbox: Update cpu to use logging   Simon Glass
• [PATCH v3 15/24] sandbox: Unmap old tags   Simon Glass
• [PATCH v3 16/24] sandbox: Add some debugging to pci_io   Simon Glass
• [PATCH v3 17/24] sandbox: Implement reference counting for address mapping   Simon Glass
• [PATCH v3 18/24] mmc: Use map_sysmem() with buffers in the mmc command   Simon Glass
• [PATCH v3 19/24] read: Tidy up use of map_sysmem() in the read command   Simon Glass
• [PATCH v3 20/24] cmd: Fix memory-mapping in cmp command   Simon Glass
• [PATCH v3 21/24] test: mbr: Unmap the buffers after use   Simon Glass
• [PATCH v3 22/24] test: mbr: Use a constant for the block size   Simon Glass
• [PATCH v3 23/24] test: mbr: Use RAM for the buffers   Simon Glass
• [PATCH v3 24/24] test: mbr: Drop a duplicate test   Simon Glass
• [PATCH v4 0/2] bootstd: Try again to resolve infinite-loop bug   Simon Glass
• [PATCH v4 1/2] Revert "bootdev: avoid infinite probe loop"   Simon Glass
• [PATCH v4 2/2] bootstd: Make bootdev_next_prio() continue after failure   Simon Glass
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Simon Glass
• [PATCH 1/2] sandbox: Enable wget command   Simon Glass
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Simon Glass
• [PATCH v2 05/32] lmb: use the BIT macro for lmb flags   Simon Glass
• [PATCH v2 19/32] sandbox: move the TCG event log to the start of ram memory   Simon Glass
• [PATCH v2 23/32] sandbox: iommu: remove lmb allocation in the driver   Simon Glass
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Simon Glass
• [PATCH v2 30/32] sandbox: adjust load address of couple of tests   Simon Glass
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Simon Glass
• [PATCH v4 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing   Simon Glass
• [PATCH v4] doc: document the pwm command   Simon Glass
• [PATCH] Kconfig: clean up the efi configuration status   Simon Glass
• [PATCH 2/2] sandbox: fix wget test failure after fixing wget issue   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH 18/40] lmb: remove the lmb_init_and_reserve() function   Simon Glass
• [PATCH v2 02/32] lmb: ut: disable unit tests for lmb changes   Simon Glass
• [PATCH v2 10/32] lmb: config: add lmb config symbols for SPL   Simon Glass
• [PATCH v2 11/32] lmb: allow lmb module to be used in SPL   Simon Glass
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Simon Glass
• [PATCH v2 18/32] lmb: add a common implementation of arch_lmb_reserve()   Simon Glass
• [PATCH v2 21/32] spl: sandbox: initialise the ram banksize in spl   Simon Glass
• [PATCH v2 22/32] sandbox: spl: enable lmb config for SPL   Simon Glass
• [PATCH v2 29/32] test: bdinfo: dump the global LMB memory map   Simon Glass
• [PATCH v2 17/32] lmb: init: initialise the lmb data structures during board init   Simon Glass
• [PATCH 06/21] mmc: Drop the blank line before accesses   Simon Glass
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Simon Glass
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Simon Glass
• [PATCH] Kconfig: clean up the efi configuration status   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH v2] sandbox: Fix pinmux warnings with non-test devicetrees   Simon Glass
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Simon Glass
• [PATCH 1/3] test/overlay: Make this depend on SANDBOX   Simon Glass
• [PATCH 2/3] test/boot: Make BOOTSTD tests depend on UT_BOOTSTD   Simon Glass
• [PATCH 3/3] test/cmd: Move wget test to under a sandbox guard   Simon Glass
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Simon Glass
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• RPI CM4 - I2C BUS and Device Tree   Simon Glass
• [PATCH] lib: move phdr increment to for loop heading   Simon Glass
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Simon Glass
• [PATCH 00/10] SMBIOS improvements   Simon Glass
• [PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot   Simon Glass
• [RESEND PATCH v2 2/2] spi: soft_spi: Parse cs-gpios only if num-chipselects is not <0>   Simon Glass
• [RESEND PATCH v4 10/10] mtd: nand: add initial ecc engine support   Simon Glass
• [RESEND PATCH v3 1/9] net/tcp: fix TCP options processing   Simon Glass
• [RESEND PATCH v3 2/9] net/tcp: fix selective acknowledge   Simon Glass
• [RESEND PATCH v3 3/9] net/tcp: put connection specific data into a tcp_stream structure   Simon Glass
• [RESEND PATCH v3 4/9] net/tcp: add connection info to tcp_stream structure   Simon Glass
• [RESEND PATCH v3 5/9] net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs   Simon Glass
• [RESEND PATCH v3 6/9] net/tcp: improve tcp framework, use better state machine   Simon Glass
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Simon Glass
• [RESEND PATCH v3 8/9] net/tcp: define a fallback value for rcv_wnd size   Simon Glass
• [RESEND PATCH v3 9/9] net/netcat: add netcat over tcp support   Simon Glass
• [PATCH] spl: fix error handling of spl_fit_read   Simon Glass
• [PATCH] usb: add reset pin handling to onboard-hub driver   Simon Glass
• [PATCH] Kconfig: clean up the efi configuration status   Simon Glass
• [PATCH 1/3] test_fs: Allow running unprivileged   Simon Glass
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Simon Glass
• [PATCH 1/3] test_fs: Allow running unprivileged   Simon Glass
• u-boot on raspberry pi with secure boot   Simon Glass
• [PATCH 1/2] pytest: requirements.txt: Resync with the rest of the project   Simon Glass
• [PATCH 2/2] Dockerfile: Update to namespace for some labels   Simon Glass
• [PATCH v1] dm: core: Make SPL_DM_SEQ_ALIAS select SPL_STRTO   Simon Glass
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Simon Glass
• clarifying i2c_get_chip_for_busnum()   Simon Glass
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Simon Glass
• [PATCH v4 13/14] test: efi: boot: Set up an image suitable for EFI testing   Simon Glass
• clarifying i2c_get_chip_for_busnum()   Simon Glass
• [PATCH v2 32/32] lmb: add logic to print lmb flag strings   Simon Glass
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH v2 2/7] dts: qcs6490-rb3gen2-u-boot: add override dtsi   Simon Glass
• [PATCH v2 4/7] iommu: qcom-smmu: add sc7280-smmu-500 compatible   Simon Glass
• [PATCH v2 5/7] qcom_defconfig: enable SC7280 clocks   Simon Glass
• [PATCH v2 6/7] configs: add qcm6490_defconfig   Simon Glass
• [PATCH v2 7/7] doc: board/qualcomm: document rb3gen2 building/flashing   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH v2 00/35] global_data: Reduce size of struct global_data   Simon Glass
• [PATCH v2 01/35] global_data: Move pci_clk to m68k and powerpc   Simon Glass
• [PATCH v2 02/35] x86: Drop use of global_data fb_base   Simon Glass
• [PATCH v2 03/35] video: Add a function to obtain the framebuffer address   Simon Glass
• [PATCH v2 04/35] video: mxc: Avoid setting global_data fb_base   Simon Glass
• [PATCH v2 05/35] video: mxs: Avoid setting global_data fb_base   Simon Glass
• [PATCH v2 06/35] arm: friendlyarm: Avoid accessing global_data fb_base   Simon Glass
• [PATCH v2 07/35] arm: ronetix: Avoid accessing global_data fb_base   Simon Glass
• [PATCH v2 08/35] zynqmp: Avoid setting the framebuffer address   Simon Glass
• [PATCH v2 09/35] video: Avoid setting global_data fb_base from SPL handoff   Simon Glass
• [PATCH v2 10/35] video: Avoid setting global_data fb_base in video setup   Simon Glass
• [PATCH v2 11/35] global_data: Drop fb_base   Simon Glass
• [PATCH v2 12/35] global_data: Convert have_console into a flag   Simon Glass
• [PATCH v2 13/35] global_data: Remove pci_ram_top   Simon Glass
• [PATCH v2 14/35] global_data: Drop global_data hose   Simon Glass
• [PATCH v2 15/35] global_data: Drop pci_bootdelay   Simon Glass
• [PATCH v2 16/35] global_data: Use less space for environment fields   Simon Glass
• [PATCH v2 17/35] board_f: Add a new struct to hold pre-relocation info   Simon Glass
• [PATCH v2 18/35] board_f: Move fdt_size to board   Simon Glass
• [PATCH v2 19/35] board_f: Move new_bootstage to boardf   Simon Glass
• [PATCH v2 20/35] board_f: Move new_bloblist to boardf   Simon Glass
• [PATCH v2 21/35] global_data: Drop spl_handoff   Simon Glass
• [PATCH v2 22/35] global_data: Collect common fields at the top   Simon Glass
• [PATCH v2 23/35] global_data: Reduce the size of bus_clk and mem_clk   Simon Glass
• [PATCH v2 24/35] global_data: Reduce the size of mon_len   Simon Glass
• [PATCH v2 25/35] global_data: log: Reorder and shrink fields   Simon Glass
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• [PATCH v2 27/35] global_data: Move baud_rate field lower   Simon Glass
• [PATCH v2 28/35] global_data: Move env_addr field higher   Simon Glass
• [PATCH v2 29/35] global_data: Put phys_addr fields near the top   Simon Glass
• [PATCH v2 30/35] global_data: Move ulong fields together   Simon Glass
• [PATCH v2 31/35] global_data: Move pointer members together   Simon Glass
• [PATCH v2 32/35] global_data: Remove jump table in SPL   Simon Glass
• [PATCH v2 33/35] global_data: Remove environment members if not used   Simon Glass
• [PATCH v2 34/35] doc: Move generic-board documentation into rst   Simon Glass
• [PATCH v2 35/35] doc: Add some guidelines about global data   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH] qconfig: Fix an incorrect format-string with negative value   Simon Glass
• [PATCH v4 00/19] labgrid: Provide an integration with Labgrid   Simon Glass
• [PATCH v4 01/19] test: Allow signaling that U-Boot is ready   Simon Glass
• [PATCH v4 02/19] test: Use a constant for the test timeout   Simon Glass
• [PATCH v4 03/19] test: Pass stderr to stdout   Simon Glass
• [PATCH v4 04/19] test: Release board after tests complete   Simon Glass
• [PATCH v4 05/19] test: Allow connecting to a running board   Simon Glass
• [PATCH v4 06/19] test: Avoid failing skipped tests   Simon Glass
• [PATCH v4 07/19] test: Create a common function to get the config   Simon Glass
• [PATCH v4 08/19] test: Introduce the concept of a role   Simon Glass
• [PATCH v4 09/19] test: Move the receive code into a function   Simon Glass
• [PATCH v4 10/19] test: Separate out the exception handling   Simon Glass
• [PATCH v4 11/19] test: Detect dead connections   Simon Glass
• [PATCH v4 12/19] test: Tidy up remaining exceptions   Simon Glass
• [PATCH v4 13/19] test: Introduce lab mode   Simon Glass
• [PATCH v4 14/19] test: Improve handling of sending commands   Simon Glass
• [PATCH v4 15/19] test: Fix mulptiplex_log typo   Simon Glass
• [PATCH v4 16/19] test: Avoid double echo when starting up   Simon Glass
• [PATCH v4 17/19] test: Try to shut down the lab console gracefully   Simon Glass
• [PATCH v4 18/19] test: Add a section for closing the connection   Simon Glass
• [PATCH v4 19/19] CI: Allow running tests on sjg lab   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Simon Glass
• [PATCH v3 06/19] test: Avoid failing skipped tests   Simon Glass
• [PATCH v4 00/14] spl: mmc: Some tweaks for SPL, particularly with MMC   Simon Glass
• [PATCH v4 01/14] rockchip: Move the default timer init to a common file   Simon Glass
• [PATCH v4 02/14] spl: Correct use of CMD_BOOTI and CMD_BOOTZ   Simon Glass
• [PATCH v4 03/14] spl: Remove some #ifdefs in spl_parse_image_header()   Simon Glass
• [PATCH v4 04/14] spl: Remove remaining #ifdef in spl_parse_image_header()   Simon Glass
• [PATCH v4 05/14] mmc: Use logging instead of printf()   Simon Glass
• [PATCH v4 06/14] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v4 07/14] log: Avoid including function names by default   Simon Glass
• [PATCH v4 08/14] spl: mmc: Drop checks for CONFIG_SPL_LIBCOMMON_SUPPORT   Simon Glass
• [PATCH v4 09/14] spl: mmc: Handle error codes consistently   Simon Glass
• [PATCH v4 10/14] spl: mmc: Adjust args of spl_mmc_find_device()   Simon Glass
• [PATCH v4 11/14] spl: mmc: Try to clean up raw-mode options   Simon Glass
• [PATCH v4 12/14] spl: Use unified inline functions for spl_load_info   Simon Glass
• [PATCH v4 13/14] spl: Create a function to init spl_load_info   Simon Glass
• [PATCH v4 14/14] blk: Correct comment for blk_get_devnum_by_uclass_idname()   Simon Glass
• [PATCH v3 07/15] mmc: Use logging instead of pr_err()   Simon Glass
• [PATCH v2 00/19] Tidy up console recording in tests   Simon Glass
• [PATCH v2 01/19] buildman: Make test_process_limit handle time.monotonic()   Simon Glass
• [PATCH v2 02/19] test: Fail when an empty line is expected but not present   Simon Glass
• [PATCH v2 03/19] test: Rename unit-test flags   Simon Glass
• [PATCH v2 04/19] test: Drop the blank line before test macros   Simon Glass
• [PATCH v2 05/19] test: Rename UTF_CONSOLE_REC to UTF_CONSOLE   Simon Glass
• [PATCH v2 06/19] mmc: Drop the blank line before accesses   Simon Glass
• [PATCH v2 07/19] test: Update NAND test to avoid extra macros   Simon Glass
• [PATCH v2 08/19] test: bloblist: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 09/19] test: boot: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 10/19] test: fdt: Check internal-function return values   Simon Glass
• [PATCH v2 11/19] test: fdt: Move common code into the setup functions   Simon Glass
• [PATCH v2 12/19] test: cmd: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 13/19] test: cmd: Drop unnecessary console_record_reset_enable()   Simon Glass
• [PATCH v2 14/19] test: dm: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 15/19] test: hush: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 16/19] test: log: Use UTF_CONSOLE in tests   Simon Glass
• [PATCH v2 17/19] test: Use UTF_CONSOLE in remaining tests   Simon Glass
• [PATCH v2 18/19] test: Tidy up checking for console end   Simon Glass
• [PATCH v2 19/19] doc: Add a few notes about how to use console checking   Simon Glass
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Simon Glass
• [PATCH v3 06/19] test: Avoid failing skipped tests   Simon Glass
• [PATCH v2 1/7] clk/qcom: add initial clock driver for sc7280   Simon Glass
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Simon Glass
• [PATCH v3 00/35] global_data: Reduce size of struct global_data   Simon Glass
• [PATCH v3 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• [PATCH 0/6] bootstd: sunxi: Migrate to standard boot   Simon Glass
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Simon Glass
• [PATCH v3 16/27] ppc: lmb: move arch specific lmb reservations to arch_misc_init()   Simon Glass
• [PATCH v3 17/27] lmb: do away with arch_lmb_reserve()   Simon Glass
• [PATCH v3 18/27] lmb: remove the unused board_lmb_reserve() function   Simon Glass
• [PATCH v3 19/27] sandbox: move the TCG event log to the start of ram memory   Simon Glass
• [PATCH v3 27/27] lmb: add logic to print lmb flag strings   Simon Glass
• [PATCH v3 01/27] alist: add a helper to check if the list is full   Simon Glass
• [PATCH v2 0/8] bootstd: sunxi: Migrate to standard boot   Simon Glass
• [PATCH v2 1/8] blk: Make functions available unconditionally   Simon Glass
• [PATCH v2 2/8] bootstd: Avoid calling unavailable block functions   Simon Glass
• [PATCH v2 3/8] bootstd: Avoid depending on BLK   Simon Glass
• [PATCH v2 4/8] sunxi: Add a bootmeth for FEL   Simon Glass
• [PATCH v2 5/8] sunxi: Move to bootstd   Simon Glass
• [PATCH v2 6/8] sunxi: Drop old distro boot variables   Simon Glass
• [PATCH v2 7/8] env: Provide a work-around for unquoting fdtfile   Simon Glass
• [PATCH v2 8/8] sunxi: Move to text environment   Simon Glass
• [u-boot-test-hooks PATCH v3 0/2] Add support for Labgrid   Simon Glass
• [u-boot-test-hooks PATCH v3 1/2] Create a common file for test scripts   Simon Glass
• [u-boot-test-hooks PATCH v3 2/2] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• xPL terminology   Simon Glass
• [PATCH 1/2] bootm: adjust the print format   Simon Glass
• [PATCH v4 10/14] efi_loader: Disable ANSI output for tests   Simon Glass
• [PATCH v4 11/14] efi_loader: Add a test app   Simon Glass
• [PATCH v4 12/14] efi_loader: Avoid using sandbox virtio devices   Simon Glass
• [PATCH 00/10] SMBIOS improvements   Simon Glass
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Simon Glass
• [PATCH 00/15] binman: More patches to support VBE   Simon Glass
• [PATCH 01/15] binman: Fix up test coverage for mkeficapsule   Simon Glass
• [PATCH 02/15] binman: Correct the comment for fdtgrep   Simon Glass
• [PATCH 03/15] binman: Tidy up comments for Entry.GetEntryArgsOrProps()   Simon Glass
• [PATCH 04/15] binman: Tidy up comments and pylint warnings in fit   Simon Glass
• [PATCH 05/15] binman: Avoid setting the image_pos attribute directly   Simon Glass
• [PATCH 06/15] binman: Update fdt-list-dir to use the provided directory   Simon Glass
• [PATCH 07/15] binman: fit: Avoid assuming that a FIT member is a section   Simon Glass
• [PATCH 08/15] binman: fit: Set the image_pos attributes only once   Simon Glass
• [PATCH 09/15] binman: fit: Refine handling of devicetrees for OF_UPSTREAM   Simon Glass
• [PATCH 10/15] binman: Adjust naming for reading symbols   Simon Glass
• [PATCH 11/15] binman: Add minor improvements to symbol-writing   Simon Glass
• [PATCH 12/15] binman: Provide a way to set the symbol base address   Simon Glass
• [PATCH 13/15] binman: Unwind the end-at-4gb special-case a little   Simon Glass
• [PATCH 14/15] binman: Allow image_pos to be None when writing symbols   Simon Glass
• [PATCH 15/15] binman: Make a start on an iMX8 test   Simon Glass
• [PATCH 00/10] SMBIOS improvements   Simon Glass
• imx8ulp_evk build with buildman fails every other time   Simon Glass
• xPL terminology   Simon Glass
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Simon Glass
• [Binman] Question regarding SPL symbol offsets generation   Simon Glass
• [PATCH 0/6] x86: Correct timer overflow and add msr/cpuid commands   Simon Glass
• [PATCH 1/6] x86: Show the CPU vendor in bdinfo   Simon Glass
• [PATCH 2/6] x86: Ensure the CPU identity exists for timer init   Simon Glass
• [PATCH 3/6] x86: Avoid timer-clock overflow   Simon Glass
• [PATCH 4/6] x86: Sync up tsc_timer with Linux   Simon Glass
• [PATCH 5/6] x86: Add a cpuid command   Simon Glass
• [PATCH 6/6] x86: Add msr command   Simon Glass
• [PATCH 00/18] vbe: Series part D   Simon Glass
• [PATCH 01/18] sandbox: Add missing header file   Simon Glass
• [PATCH 02/18] bootstd: Add stub for bootdev_setup_for_sibling_blk()   Simon Glass
• [PATCH 03/18] gzip: Correct function comment for gunzip()   Simon Glass
• [PATCH 04/18] fdtdec: Support separate BSS for all XPL builds   Simon Glass
• [PATCH 05/18] tiny-printf: Correct return values   Simon Glass
• [PATCH 06/18] tpl: Support numbered aliases in device tree   Simon Glass
• [PATCH 07/18] ram: Support driver model in TPL   Simon Glass
• [PATCH 08/18] serial: Support debug UART in TPL   Simon Glass
• [PATCH 09/18] armv8: Support not having separate BSS   Simon Glass
• [PATCH 10/18] arm: cache: Drop a stale comment   Simon Glass
• [PATCH 11/18] arm: Fix up a stale comment in sections.c   Simon Glass
• [PATCH 12/18] mmc: Support driver model in TPL   Simon Glass
• [PATCH 13/18] mmc: Add more debugging for SPL   Simon Glass
• [PATCH 14/18] mmc: Log the error when init fails   Simon Glass
• [PATCH 15/18] mmc: rockchip: Log some error returns   Simon Glass
• [PATCH 16/18] mmc: rockchip: Allow clocks to be missing   Simon Glass
• [PATCH 17/18] rockchip: mmc: Fix a missing colon   Simon Glass
• [PATCH 18/18] rockchip: Provided SPL control over efuse presence   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [u-boot-test-hooks PATCH v4 0/3] Add support for Labgrid   Simon Glass
• [u-boot-test-hooks PATCH v4 1/3] Create a common file for test scripts   Simon Glass
• [u-boot-test-hooks PATCH v4 2/3] Add .none scripts for power off/on   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [PATCH 1/3] x86: coreboot: Update the timestamp code to use sysinfo   Simon Glass
• [PATCH 2/3] x86: coreboot: Add timestamps from coreboot to bootstage   Simon Glass
• [PATCH 3/3] x86: coreboot: Enable receiving timestamps from coreboot   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH v5 00/20] labgrid: Provide an integration with Labgrid   Simon Glass
• [PATCH v5 01/20] test: Allow signaling that U-Boot is ready   Simon Glass
• [PATCH v5 02/20] test: Use a constant for the test timeout   Simon Glass
• [PATCH v5 03/20] test: Pass stderr to stdout   Simon Glass
• [PATCH v5 04/20] test: Release board after tests complete   Simon Glass
• [PATCH v5 05/20] test: Allow connecting to a running board   Simon Glass
• [PATCH v5 06/20] test: Avoid failing skipped tests   Simon Glass
• [PATCH v5 07/20] test: Create a common function to get the config   Simon Glass
• [PATCH v5 08/20] test: Introduce the concept of a role   Simon Glass
• [PATCH v5 09/20] test: Move the receive code into a function   Simon Glass
• [PATCH v5 10/20] test: Separate out the exception handling   Simon Glass
• [PATCH v5 11/20] test: Detect dead connections   Simon Glass
• [PATCH v5 12/20] test: Tidy up remaining exceptions   Simon Glass
• [PATCH v5 13/20] test: Introduce lab mode   Simon Glass
• [PATCH v5 14/20] test: Improve handling of sending commands   Simon Glass
• [PATCH v5 15/20] test: Fix mulptiplex_log typo   Simon Glass
• [PATCH v5 16/20] test: Avoid double echo when starting up   Simon Glass
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   Simon Glass
• [PATCH v5 18/20] test: Add a section for closing the connection   Simon Glass
• [PATCH v5 19/20] test: Support testing with two board-builds   Simon Glass
• [PATCH v5 20/20] CI: Allow running tests on sjg lab   Simon Glass
• [PATCH 00/18] vbe: Series part D   Simon Glass
• imx8ulp_evk build with buildman fails every other time   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH] test/py/tests/test_bootstage.py: Combine stash/unstash tests   Simon Glass
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Simon Glass
• Re: Grub doesn’t load devicetree   Simon Glass
• [PATCH 2/2] bootstage: Do not sort records   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH 05/13] net: fm: call dtsec_init_phy() only when it is defined   Simon Glass
• [PATCH 08/13] net: ftgmac100: depend on NET   Simon Glass
• [PATCH 09/13] net: wget: allow EFI boot   Simon Glass
• [PATCH 1/4] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set   Simon Glass
• [RFC PATCH 1/1] env: introduce variable ranges   Simon Glass
• [PATCH 2/2] cmd: booti: adjust the print format   Simon Glass
• [PATCH 02/10] sysinfo: Add sysinfo driver and data structure for SMBIOS   Simon Glass
• [PATCH 13/18] mmc: Add more debugging for SPL   Simon Glass
• [PATCH v9 20/37] net-lwip: add DHCP support and dhcp commmand   Simon Glass
• [PATCH v9 18/37] net: eth-uclass: add function eth_start_udev()   Simon Glass
• [PATCH v9 35/37] [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX   Simon Glass
• [PATCH v2 14/32] lmb: introduce a function to add memory to the lmb memory map   Simon Glass
• RPI CM4 - I2C BUS and Device Tree   Simon Glass
• [PATCH v4 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing   Simon Glass
• [PATCH 12/35] global_data: Convert have_console into a flag   Simon Glass
• [PATCH v2 2/3] efi: Convert device_path allocation to use malloc()   Simon Glass
• [PATCH 00/19] vbe: Series part E   Simon Glass
• [PATCH 01/19] image: Add a prototype for fit_image_get_phase()   Simon Glass
• [PATCH 02/19] serial: ns16550: Allow clocks to be missing   Simon Glass
• [PATCH 03/19] boot: Allow FIT to fall back from best-match option   Simon Glass
• [PATCH 04/19] bootstd: Avoid sprintf() in SPL when creating bootdevs   Simon Glass
• [PATCH 05/19] boot: Respect the load_op in fit_image_load()   Simon Glass
• [PATCH 06/19] malloc: Show amount of used space when memory runs out   Simon Glass
• [PATCH 07/19] malloc: Provide a simple malloc for VPL   Simon Glass
• [PATCH 08/19] Support setting a maximum size for the VPL image   Simon Glass
• [PATCH 09/19] spl: Report a loader failure   Simon Glass
• [PATCH 10/19] spl: Allow serial to be disabled in any XPL phase   Simon Glass
• [PATCH 11/19] spl: Support a relocated stack in any XPL phase   Simon Glass
• [PATCH 12/19] spl: Drop use of uintptr_t   Simon Glass
• [PATCH 13/19] spl: Drop a duplicate variable in boot_from_devices()   Simon Glass
• [PATCH 14/19] spl: Add some more debugging to load_simple_fit()   Simon Glass
• [PATCH 15/19] spl: lib: Allow for decompression in any SPL build   Simon Glass
• [PATCH 16/19] boot: Allow use of FIT in TPL and VPL   Simon Glass
• [PATCH 17/19] lib: Allow crc8 in TPL and VPL   Simon Glass
• [PATCH 18/19] boot: Imply CRC8 with VBE   Simon Glass
• [PATCH 19/19] hash: Plumb crc8 into the hash functions   Simon Glass
• [PATCH v5 00/20] labgrid: Provide an integration with Labgrid   Simon Glass
• [PATCH 2/2] cmd: booti: adjust the print format   Simon Glass
• [PATCH v5 08/20] test: Introduce the concept of a role   Simon Glass
• [PATCH 12/35] global_data: Convert have_console into a flag   Simon Glass
• [PATCH v5 03/20] test: Pass stderr to stdout   Simon Glass
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   Simon Glass
• [PATCH v5 01/20] test: Allow signaling that U-Boot is ready   Simon Glass
• [PATCH v6 07/28] hash: integrate hash on mbedtls   Simon Glass
• [PATCH 00/15] binman: More patches to support VBE   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH 2/2] cmd: booti: adjust the print format   Simon Glass
• [PATCH 05/13] net: fm: call dtsec_init_phy() only when it is defined   Simon Glass
• [PATCH v9 35/37] [TESTING] Kconfig: enable NET_LWIP by default except for SANDBOX   Simon Glass
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   Simon Glass
• xPL terminology   Simon Glass
• [u-boot-test-hooks][PATCH 1/2] bin/writer.rpi_mount: Use kernel= and simplify logic   Simon Glass
• [u-boot-test-hooks][PATCH 2/2] bin/flashair.rpi: Use kernel= and simplify logic   Simon Glass
• [u-boot-test-hooks][PATCH] labgrid: Add wrapper scripts around using labgrid-client for device control   Simon Glass
• [PATCH 00/19] vbe: Series part E   Simon Glass
• [PATCH 00/18] vbe: Series part D   Simon Glass
• [PATCH v5 03/20] test: Pass stderr to stdout   Simon Glass
• My labgrid setup   Simon Glass
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Simon Glass
• [PATCH 09/13] net: wget: allow EFI boot   Simon Glass
• [u-boot-test-hooks][PATCH 1/2] bin/writer.rpi_mount: Use kernel= and simplify logic   Simon Glass
• [PATCH V8 0/7] Low Power Mode: Package TIFS Stub in BeaglePlay   Dhruva Gole
• [PATCH V8 1/7] MAINTAINERS: Include the TI docs under ARM TI   Dhruva Gole
• [PATCH V8 2/7] doc: ti: k3: Add TIFS Stub documentation   Dhruva Gole
• [PATCH V8 3/7] doc: board: ti: Update to use the new boot firmware labels   Dhruva Gole
• [PATCH V8 4/7] doc: ti: am62*: Mention TIFS Stub in img fmts and boot flow   Dhruva Gole
• [PATCH V8 5/7] arm: dts: k3-am625-beagleplay: Package TIFS Stub   Dhruva Gole
• [PATCH V8 6/7] doc: beagle: am62x_beagleplay: Document the use of TIFS Stub   Dhruva Gole
• [PATCH V8 7/7] arm: dts: phycore-am62x: Package TIFS Stub   Dhruva Gole
• [PATCH 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   Henrik Grimler
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   Henrik Grimler
• [PATCH v4 14/38] arm: dts: exynos: Add upstream DW MMC properties to all Exynos dts   Henrik Grimler
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   Henrik Grimler
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   Henrik Grimler
• [PATCH 01/11] board: shc: convert to DM_I2C   Anatolij Gustschin
• [PATCH 02/11] board: chiliboard: convert to DM_I2C   Anatolij Gustschin
• [PATCH 03/11] board: cm-t43: convert to DM_I2C   Anatolij Gustschin
• [PATCH 04/11] board: igep003x: convert to DM_I2C   Anatolij Gustschin
• [PATCH 05/11] board: sl50: convert to DM_I2C   Anatolij Gustschin
• [PATCH 06/11] board: rut: convert to DM_I2C   Anatolij Gustschin
• [PATCH 07/11] board: novena: convert to DM_I2C   Anatolij Gustschin
• [PATCH 08/11] board: vining_2000: convert to DM_I2C   Anatolij Gustschin
• [PATCH 09/11] board: sniper: convert to DM_I2C   Anatolij Gustschin
• [PATCH 10/11] board: cm_fx6: convert to DM_I2C   Anatolij Gustschin
• [PATCH 11/11] board: vf610twr: convert to DM_I2C   Anatolij Gustschin
• [PATCH] driver: pwm: pwm-imx: fix probing on imx6   Anatolij Gustschin
• [PATCH v2 10/11] board: cm_fx6: convert to DM_I2C   Anatolij Gustschin
• [PATCH 10/11] board: cm_fx6: convert to DM_I2C   Anatolij Gustschin
• [PATCH v2 08/11] board: vining_2000: convert to DM_I2C   Anatolij Gustschin
• [PATCH 00/20] i2c: Chip away at some old code   Anatolij Gustschin
• [PATCH v2 1/3] aes: Allow to store randomly generated IV in the FIT   Paul HENRYS
• [PATCH v2 2/3] tools: binman: Add a property to pass a key directory to mkimage   Paul HENRYS
• [PATCH v2 3/3] tools: binman: Add tests for FIT with data encrypted by mkimage   Paul HENRYS
• [PATCH 1/2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Benjamin Hahn
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Benjamin Hahn
• [PATCH v4] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Benjamin Hahn
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Benjamin Hahn
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Benjamin Hahn
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Benjamin Hahn
• [PATCH 0/2] phycore-imx8mp: Add support for SPI NOR flash   Benjamin Hahn
• [PATCH 1/2] configs: phycore-imx8mp_defconfig: Enable SPI NOR flash support   Benjamin Hahn
• [PATCH 2/2] board: phytec: phycore_imx8mp: Add mtd spi partitions   Benjamin Hahn
• [PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Benjamin Hahn
• [RESEND PATCH v4 0/3] provide names for emmc hardware partitions   Tim Harvey
• [PATCH] gw_ventana: Remove unneeded comments   Tim Harvey
• [PATCH 3/3] imx: Remove CFG_MXC_USB_PORTSC   Tim Harvey
• [PATCH v2 4/4] imx: Remove CFG_MXC_USB_PORTSC   Tim Harvey
• [PATCHv4 11/14] doc: cmd: add documentation for cpu command   Z.Q. Hou
• [PATCHv4 10/14] cmd: cpu: add release subcommand   Z.Q. Hou
• [PATCHv4 11/14] doc: cmd: add documentation for cpu command   Z.Q. Hou
• [PATCHv4 10/14] cmd: cpu: add release subcommand   Z.Q. Hou
• [PATCHv5 00/14] Add a subcommand 'release' to cmd/cpu.c   Zhiqiang Hou
• [PATCHv5 01/14] clk: imx8m: register ARM A53 core clock   Zhiqiang Hou
• [PATCHv5 02/14] cpu: add release_core callback   Zhiqiang Hou
• [PATCHv5 03/14] cpu: sandbox: implement release_core callback   Zhiqiang Hou
• [PATCHv5 04/14] test: cpu: add test for release CPU core.   Zhiqiang Hou
• [PATCHv5 05/14] cpu: imx: fix the CPU frequency in cpu_imx_get_info()   Zhiqiang Hou
• [PATCHv5 06/14] cpu: imx: fix the CPU type field width   Zhiqiang Hou
• [PATCHv5 07/14] cpu: imx: removed the tail '\n' of the CPU description   Zhiqiang Hou
• [PATCHv5 08/14] cpu: imx: Add i.MX 8M series SoCs   Zhiqiang Hou
• [PATCHv5 09/14] cpu: imx: implement release_core callback   Zhiqiang Hou
• [PATCHv5 10/14] cmd: cpu: add release subcommand   Zhiqiang Hou
• [PATCHv5 11/14] doc: cmd: add documentation for cpu command   Zhiqiang Hou
• [PATCHv5 12/14] MAINTAINERS: add entry for cpu command   Zhiqiang Hou
• [PATCHv5 13/14] configs: imx8m: enable the 'cpu' command   Zhiqiang Hou
• [PATCHv5 14/14] configs: imx93: enable the 'cpu' command   Zhiqiang Hou
• [PATCH 0/5] arch: arm: dts: ti: Add missing fss range   Jonathan Humphreys
• [PATCH 1/5] arch: arm: dts: k3-j784s4-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH 2/5] arch: arm: dts: k3-am69-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH 3/5] arch: arm: dts: k3-j7200-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH 4/5] arch: arm: dts: k3-j721e-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH 5/5] arch: arm: dts: k3-j721e-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH v2 0/5] arch: arm: dts: ti: Add missing fss range   Jonathan Humphreys
• [PATCH v2 1/5] arch: arm: dts: k3-j784s4-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v2 2/5] arch: arm: dts: k3-am69-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH v2 3/5] arch: arm: dts: k3-j7200-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v2 4/5] arch: arm: dts: k3-j721e-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v2 5/5] arch: arm: dts: k3-j721e-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH v3 0/5] arch: arm: dts: ti: Add missing fss range   Jonathan Humphreys
• [PATCH v3 1/5] arch: arm: dts: k3-j784s4-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v3 2/5] arch: arm: dts: k3-am69-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH v3 3/5] arch: arm: dts: k3-j7200-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v3 4/5] arch: arm: dts: k3-j721e-r5-evm: Add missing fss range   Jonathan Humphreys
• [PATCH v3 5/5] arch: arm: dts: k3-j721e-r5-sk: Add missing fss range   Jonathan Humphreys
• [PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings   Mikhail Kalashnikov
• [PATCH 2/9] sunxi: H616: dram: LPDDR3: adjust settings   Mikhail Kalashnikov
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Mikhail Kalashnikov
• [PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings   Mikhail Kalashnikov
• [PATCH V2 1/3] nvmem: u-boot-env: error if NVMEM device is too small   Srinivas Kandagatla
• [PATCH] MAINTAINERS: Update path for U-Boot environment variables YAML   Srinivas Kandagatla
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Minkyu Kang
• Please pull u-boot-samsung master   Minkyu Kang
• Please pull u-boot-samsung master   Minkyu Kang
• [PATCH v7 8/8] rockchip: Avoid #ifdefs in RK3399 SPL   Jonas Karlman
• [PATCH v8 8/8] rockchip: Avoid #ifdefs in RK3399 SPL   Jonas Karlman
• [RFC] rockchip: rk3399: Migrate to use TPL on bob and kevin   Jonas Karlman
• [PATCH 4/5] dm: adc: Add SPL_ADC Kconfig symbol for use of ADC in SPL   Jonas Karlman
• [RFC] rockchip: rk3399: Migrate to use TPL on bob and kevin   Jonas Karlman
• [PATCH v3 3/7] board: rock5b-rk3588: add USB-C controller support   Jonas Karlman
• [PATCH v3 4/7] board: rock5b-rk3588: enable USB-C in operating system   Jonas Karlman
• [PATCH v2 0/5] board: rockchip: Add Radxa ZERO 3W/3E   Jonas Karlman
• [PATCH v2 1/5] arm64: dts: rockchip: Add Radxa ZERO 3W/3E   Jonas Karlman
• [PATCH v2 2/5] arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W   Jonas Karlman
• [PATCH v2 3/5] arm64: dts: rockchip: add gpio-line-names to radxa-zero-3   Jonas Karlman
• [PATCH v2 4/5] dm: adc: Add SPL_ADC Kconfig symbol for use of ADC in SPL   Jonas Karlman
• [PATCH v2 5/5] board: rockchip: Add Radxa ZERO 3W/3E   Jonas Karlman
• [PATCH v2 00/10] rockchip: pinctrl: Add support for pinmux status cmd   Jonas Karlman
• [PATCH v2 01/10] pinctrl: rockchip: Use syscon_regmap_lookup_by_phandle()   Jonas Karlman
• [PATCH v2 02/10] pinctrl: rockchip: Add a pin_to_bank() helper   Jonas Karlman
• [PATCH v2 03/10] pinctrl: rockchip: Update get_gpio_mux() ops   Jonas Karlman
• [PATCH v2 04/10] pinctrl: rockchip: Add pinmux status related ops   Jonas Karlman
• [PATCH v2 05/10] pinctrl: rockchip: Add gpio_request_enable() ops   Jonas Karlman
• [PATCH v2 06/10] gpio: rockchip: Get pinctrl device from gpio-ranges prop   Jonas Karlman
• [PATCH v2 07/10] gpio: rockchip: Use pinctrl pin offset to get_gpio_mux()   Jonas Karlman
• [PATCH v2 08/10] gpio: rockchip: Add request() ops   Jonas Karlman
• [PATCH v2 09/10] rockchip: gpio: Add gpio-ranges props   Jonas Karlman
• [PATCH v2 10/10] rockchip: gpio: Add missing gpio aliases   Jonas Karlman
• [PATCH] rockchip: rk3568-nanopi-r5: Disable SPL_DM_WARN Kconfig option   Jonas Karlman
• [PATCH 0/2] bootstage: Fix unstash and sorting of records   Jonas Karlman
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Jonas Karlman
• [PATCH 2/2] bootstage: Do not sort records   Jonas Karlman
• [PATCH 0/3] dm: core: Avoid multiple calls to fdt_parent_offset()   Jonas Karlman
• [PATCH 1/3] dm: core: fdtaddr: Avoid multiple calls to fdt_parent_offset()   Jonas Karlman
• [PATCH 2/3] dm: core: ofnode: Avoid multiple calls to ofnode_get_parent()   Jonas Karlman
• [PATCH 3/3] dm: core: regmap: Avoid multiple calls to ofnode_get_parent()   Jonas Karlman
• [PATCH] serial: ns16550: Try get serial clock rate from DT before CLK   Jonas Karlman
• [PATCH 0/4] rockchip: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH 1/4] rockchip: rk3308: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH 2/4] rockchip: rk356x: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH 3/4] rockchip: rk3588: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH 4/4] rockchip: px30: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH] serial: ns16550: Try get serial clock rate from DT before CLK   Jonas Karlman
• [PATCH 0/4] rockchip: Skip serial pinctrl at pre-reloc phase   Jonas Karlman
• [PATCH v3 3/7] board: rock5b-rk3588: add USB-C controller support   Jonas Karlman
• [PATCH v3 4/7] board: rock5b-rk3588: enable USB-C in operating system   Jonas Karlman
• [PATCH v3 0/7] FUSB302 USB-C controller support   Jonas Karlman
• OF_UPSTREAM vs. additional dtbs   Jonas Karlman
• OF_UPSTREAM vs. additional dtbs   Jonas Karlman
• OF_UPSTREAM vs. additional dtbs   Jonas Karlman
• [PATCH 2/2] bootstage: Do not sort records   Jonas Karlman
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Jonas Karlman
• [PATCH 2/2] bootstage: Do not sort records   Jonas Karlman
• [PATCH 2/2] bootstage: Do not sort records   Jonas Karlman
• [PATCH] regulator: rk8xx: Fix buck get and set enabled state on RK806   Jonas Karlman
• Selecting serial device for console   Mark Kettenis
• [PATCH] tools/mkeficapsule: correct printf codes   Mark Kettenis
• [PATCH] tools: imagetool: Remove unnecessary check from toc0_verify_cert_item()   Seung-Woo Kim
• [PATCH] tools: imagetool: Remove unnecessary check from toc0_verify_cert_item()   Seung-Woo Kim
• [PATCH] usb: dwc3-generic: fix CONFIG_DM_REGULATOR-off case   Jan Kiszka
• [PATCH] usb: dwc3-generic: fix CONFIG_DM_REGULATOR-off case   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• OF_UPSTREAM vs. additional dtbs   Jan Kiszka
• Selecting serial device for console   Fiona Klute
• Selecting serial device for console   Fiona Klute
• What is the proper way to sign fit images using binman/mkimage for verified boot   Alexander Kochetkov
• [PATCH 09/11] board: sniper: convert to DM_I2C   Paul Kocialkowski
• [PATCH v1 2/4] cmd: ab: introduce 'ab_dump' command to print BCB block content   Mattijs Korpershoek
• [PATCH] cmd: bcb: Fix segfault on invalid block device   Mattijs Korpershoek
• [PATCH v2] boot: android: fix booting without a ramdisk   Mattijs Korpershoek
• [PATCH v4 0/7] usb: gadget: atmel: Code refactor and DM_USB_GADGET support   Mattijs Korpershoek
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Mattijs Korpershoek
• [PATCH 1/3] test_fs: Allow running unprivileged   Mattijs Korpershoek
• [PATCH 2/3] test_fs: Rename mount dir to scratch   Mattijs Korpershoek
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Mattijs Korpershoek
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Mattijs Korpershoek
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Mattijs Korpershoek
• [PATCH] usb: gadget: usbhs: Add Renesas USBHS device driver   Mattijs Korpershoek
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Mattijs Korpershoek
• [PATCH] usb: gadget: usbhs: Add Renesas USBHS device driver   Mattijs Korpershoek
• [PATCH] usb: gadget: usbhs: Add Renesas USBHS device driver   Mattijs Korpershoek
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Mattijs Korpershoek
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Mattijs Korpershoek
• [PATCH 2/6] sunxi: Add a bootmeth for FEL   Mattijs Korpershoek
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Mattijs Korpershoek
• [PATCH] android_ab: Fix backup offset calculation   Mattijs Korpershoek
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Mattijs Korpershoek
• [PATCH] usb: gadget: ux500: Do not redefine ops if CONFIG_USB_MUSB_HOST set   Mattijs Korpershoek
• [PATCH] usb: gadget: ux500: Do not redefine ops if CONFIG_USB_MUSB_HOST set   Mattijs Korpershoek
• [PATCH] cmd: bind: Use device sequence instead for driver bind/unbind   Mattijs Korpershoek
• [PATCH 02/21] test: Fail when an empty line is expected but not present   Mattijs Korpershoek
• [PATCH 05/21] test: Rename UTF_CONSOLE_REC to UTF_CONSOLE   Mattijs Korpershoek
• [PATCH 11/21] test: boot: Use UTF_CONSOLE in tests   Mattijs Korpershoek
• [PATCH 17/21] test: hush: Use UTF_CONSOLE in tests   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240820   Mattijs Korpershoek
• [PATCH] cmd: bind: Use device sequence instead for driver bind/unbind   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20240820   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240820   Mattijs Korpershoek
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Mattijs Korpershoek
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240820   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240822   Mattijs Korpershoek
• [PATCH 1/2] bootm: adjust the print format   Mattijs Korpershoek
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Mattijs Korpershoek
• [PATCH 1/6] usb: gadget: Inline usb_add_gadget_udc_release   Mattijs Korpershoek
• [PATCH 2/6] usb: gadget: Drop usb_udc_release()   Mattijs Korpershoek
• [PATCH 3/6] usb: gadget: Track driver data as part of struct usb_gadget   Mattijs Korpershoek
• [PATCH 4/6] usb: gadget: Drop dev_to_usb_gadget()   Mattijs Korpershoek
• [PATCH 5/6] usb: gadget: dwc2: Drop get/set_udc_gadget_private_data()   Mattijs Korpershoek
• [PATCH 6/6] usb: gadget: Pass struct udevice to usb_add_gadget_udc()   Mattijs Korpershoek
• [PATCH v2] android_ab: Fixes: Fix backup offset calculation   Mattijs Korpershoek
• [PATCH] mmc: Hide mmc speed command under mmc command   Mattijs Korpershoek
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [RESEND PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [PATCH v2 1/3] mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag   Arseniy Krasnov
• [PATCH v2 2/3] mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()'   Arseniy Krasnov
• [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Arseniy Krasnov
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Arseniy Krasnov
• [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Arseniy Krasnov
• [PATCH v3 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
• [PATCH v3 1/3] mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag   Arseniy Krasnov
• [PATCH v3 2/3] mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()'   Arseniy Krasnov
• [PATCH v3 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Arseniy Krasnov
• [PATCH v2] doc: document the pwm command   Emil Kronborg
• [PATCH v3] doc: document the pwm command   Emil Kronborg
• [PATCH v3] doc: document the pwm command   Emil Kronborg
• [PATCH v3] doc: document the pwm command   Emil Kronborg
• [PATCH v4] doc: document the pwm command   Emil Kronborg
• [PATCH] imx: imx8: fix build when CONFIG_IMX_BOOTAUX is set   Max Krummenacher
• [RESEND PATCH v2] cmd: led: fix led command usage for the LED_SW_BLINK enabled case   Mikhail Kshevetskiy
• [RESEND PATCH v2 0/2] spi: dtb parsing fixes   Mikhail Kshevetskiy
• [RESEND PATCH v2 1/2] spi: soft_spi: fix miso gpio property name   Mikhail Kshevetskiy
• [RESEND PATCH v2 2/2] spi: soft_spi: Parse cs-gpios only if num-chipselects is not <0>   Mikhail Kshevetskiy
• [RESEND PATCH v4 00/10] mtd: spinand: initial support of ecc engines   Mikhail Kshevetskiy
• [RESEND PATCH v4 01/10] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
• [RESEND PATCH v4 02/10] mtd: spinand: Add a NAND page I/O request type   Mikhail Kshevetskiy
• [RESEND PATCH v4 03/10] mtd: spinand: add missed add missed MODULE_DEVICE_TABLE()   Mikhail Kshevetskiy
• [RESEND PATCH v4 04/10] mtd: spinand: simulate behavior of linux's function spinand_wait()   Mikhail Kshevetskiy
• [RESEND PATCH v4 05/10] mtd: spinand: more use of spinand_to_{something} helpers   Mikhail Kshevetskiy
• [RESEND PATCH v4 06/10] mtd: spinand: replace enable_ecc variable with disable_ecc and update corresponding logic   Mikhail Kshevetskiy
• [RESEND PATCH v4 07/10] mtd: spinand: minor refactoring   Mikhail Kshevetskiy
• [RESEND PATCH v4 08/10] mtd: spinand: more refactoring   Mikhail Kshevetskiy
• [RESEND PATCH v4 09/10] mtd: spinand: sync supported flashes with linux-6.10   Mikhail Kshevetskiy
• [RESEND PATCH v4 10/10] mtd: nand: add initial ecc engine support   Mikhail Kshevetskiy
• [RESEND PATCH v2 0/3] cmd/mtd: add missed featuries   Mikhail Kshevetskiy
• [RESEND PATCH v2 1/3] cmd: mtd: add markbad command support   Mikhail Kshevetskiy
• [RESEND PATCH v2 2/3] cmd: mtd: add torture command support   Mikhail Kshevetskiy
• [RESEND PATCH v2 3/3] cmd: mtd: add nandtest command support   Mikhail Kshevetskiy
• [RESEND PATCH v3 0/9] net: tcp: improve tcp support   Mikhail Kshevetskiy
• [RESEND PATCH v3 1/9] net/tcp: fix TCP options processing   Mikhail Kshevetskiy
• [RESEND PATCH v3 2/9] net/tcp: fix selective acknowledge   Mikhail Kshevetskiy
• [RESEND PATCH v3 3/9] net/tcp: put connection specific data into a tcp_stream structure   Mikhail Kshevetskiy
• [RESEND PATCH v3 4/9] net/tcp: add connection info to tcp_stream structure   Mikhail Kshevetskiy
• [RESEND PATCH v3 5/9] net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs   Mikhail Kshevetskiy
• [RESEND PATCH v3 6/9] net/tcp: improve tcp framework, use better state machine   Mikhail Kshevetskiy
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
• [RESEND PATCH v3 8/9] net/tcp: define a fallback value for rcv_wnd size   Mikhail Kshevetskiy
• [RESEND PATCH v3 9/9] net/netcat: add netcat over tcp support   Mikhail Kshevetskiy
• [RESEND PATCH v4 10/10] mtd: nand: add initial ecc engine support   Mikhail Kshevetskiy
• [RESEND PATCH v3 4/9] net/tcp: add connection info to tcp_stream structure   Mikhail Kshevetskiy
• [RESEND PATCH v3 6/9] net/tcp: improve tcp framework, use better state machine   Mikhail Kshevetskiy
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
• [PATCH v4 0/9] net: tcp: improve tcp support   Mikhail Kshevetskiy
• [PATCH v4 1/9] net/tcp: fix TCP options processing   Mikhail Kshevetskiy
• [PATCH v4 2/9] net/tcp: fix selective acknowledge   Mikhail Kshevetskiy
• [PATCH v4 3/9] net/tcp: put connection specific data into a tcp_stream structure   Mikhail Kshevetskiy
• [PATCH v4 4/9] net/tcp: add connection info to tcp_stream structure   Mikhail Kshevetskiy
• [PATCH v4 5/9] net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs   Mikhail Kshevetskiy
• [PATCH v4 6/9] net/tcp: improve tcp framework, use better state machine   Mikhail Kshevetskiy
• [PATCH v4 7/9] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
• [PATCH v4 8/9] net/tcp: define a fallback value for rcv_wnd size   Mikhail Kshevetskiy
• [PATCH v4 9/9] net/netcat: add netcat over tcp support   Mikhail Kshevetskiy
• [PATCH v5 00/11] net: tcp: improve tcp support   Mikhail Kshevetskiy
• [PATCH v5 01/11] net/tcp: fix TCP options processing   Mikhail Kshevetskiy
• [PATCH v5 02/11] net/tcp: fix selective acknowledge   Mikhail Kshevetskiy
• [PATCH v5 03/11] net/tcp: put connection specific data into a tcp_stream structure   Mikhail Kshevetskiy
• [PATCH v5 04/11] net/tcp: add connection info to tcp_stream structure   Mikhail Kshevetskiy
• [PATCH v5 05/11] net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs   Mikhail Kshevetskiy
• [PATCH v5 06/11] net/tcp: improve tcp framework, use better state machine   Mikhail Kshevetskiy
• [PATCH v5 07/11] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
• [PATCH v5 08/11] net/tcp: define a fallback value for rcv_wnd size   Mikhail Kshevetskiy
• [PATCH v5 09/11] net/netcat: add netcat over tcp support   Mikhail Kshevetskiy
• [PATCH v5 10/11] net/httpd: add httpd common code   Mikhail Kshevetskiy
• [PATCH v5 11/11] net/httpd-upload: an example web-server implementation for file uploading   Mikhail Kshevetskiy
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
• [PATCH] versal2: Update the sys prompt name   Love Kumar
• [PATCH] test/py/tests/test_bootstage.py: Combine stash/unstash tests   Love Kumar
• [PATCH] test/py: spi: Set the expected error message   Love Kumar
• [PATCH v3 3/7] arm: dts: k3-j7*-r5: Add MPU clock in clocks property   Kumar, Udit
• [PATCH v3 4/7] drivers: misc: k3_avs: Extract MPU clk and dev ID from DT   Kumar, Udit
• [PATCH v3 5/7] arm: mach-k3: j721s2_init: Initialize AVS Class 0   Kumar, Udit
• [PATCH v3 6/7] arm: dts: j721s2: Add VTM node in R5   Kumar, Udit
• [PATCH v3 7/7] configs: j721s2_evm_r5_defconfig: Add AVS Configs   Kumar, Udit
• [PATCH] ram: k3-ddrss: Handle error properly in lpddr4_start   Udit Kumar
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Prasad Kummari
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Kummari, Prasad
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Kummari, Prasad
• [PATCH] arm64: zynqmp: Add u-boot command to boot into recovery image   Prasad Kummari
• [PATCH v2] mtd: spi-nor: Disable chip erase for S28HS02GT flash   Takahiro Kuwano
• u-boot on raspberry pi with secure boot   Jonas Kvinge
• u-boot on raspberry pi with secure boot   Jonas Kvinge
• u-boot on raspberry pi with secure boot   Jonas Kvinge
• [RFC PATCH 0/4] dm: Duplicate uclass name fix and alias improvements   Zixun LI
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Zixun LI
• [PATCH] dm: core: Show device sequence instead in dm_dump_tree()   Zixun LI
• [PATCH] cmd: bind: Use device sequence instead for driver bind/unbind   Zixun LI
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Zixun LI
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Zixun LI
• [PATCH] usb: gadget: udc: Fix duplicate uclass name   Zixun LI
• [PATCH 0/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Zixun LI
• M68K Vectors   Peter LaDow
• [PATCH] imx: ele_ahab: Add HUK derivation support   Ye Li
• [PATCH v3] imx: ele_ahab: Add HUK derivation support   Ye Li
• [PATCH 1/1] riscv: CONFIG_SPL_FRAMEPOINTER must depend on CONFIG_SPL   Leo Liang
• [PATCH 1/2] riscv: allow to enable SHOW_REGS in main U-Boot only   Leo Liang
• [PATCH 2/2] riscv: show registers in crash dumps by default   Leo Liang
• [PATCH 1/1] cmd: add rdcycle test to RISC-V exception command   Leo Liang
• [PATCH v3 3/5] arch: arm: dts: k3-j7200-r5-evm: Add missing fss range   Limaye, Aniket
• [EXTERNAL] Re: [PATCH 1/6] arm: dts: k3-j7200-r5: Add the pmic node in R5 dt   Limaye, Aniket
• [PATCH v1] arm: dts: nuvoton: add dts support for npcm845 yosemite4   Jim Liu
• [PATCH] maintainers: Update list of maintainers for Corstone-1000   Hugues KAMBA MPIANA
• [PATCH 1/2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Lukasz Majewski
• [PATCH 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Lukasz Majewski
• [PATCH v2 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Lukasz Majewski
• [PATCH 1/2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH v2 2/2] config: Adjust Phytec imx8mm module config to support NVME disk   Lukasz Majewski
• [PATCH v2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH v2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [Binman] Question regarding SPL symbol offsets generation   Lukasz Majewski
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [Binman] Question regarding SPL symbol offsets generation   Lukasz Majewski
• [PATCH v4] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Lukasz Majewski
• [PATCH] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Lukasz Majewski
• [PATCH] dts: imx: Enable USB support in imx8mm-phyboard-polis-rdk-u-boot.dtsi   Lukasz Majewski
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Lukasz Majewski
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Lukasz Majewski
• [Binman] Question regarding SPL symbol offsets generation   Lukasz Majewski
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Lukasz Majewski
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Lukasz Majewski
• [PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Lukasz Majewski
• [PATCH v2] dts: imx: Enable USB support in imx8mm-phyboard-polis-rdk-u-boot.dtsi   Lukasz Majewski
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Lukasz Majewski
• [PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget   Lukasz Majewski
• [PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Lukasz Majewski
• [Binman] Question regarding SPL symbol offsets generation   Lukasz Majewski
• [Binman] Question regarding SPL symbol offsets generation   Lukasz Majewski
• [PATCH v2] config: imx: Define CFG_SYS_UBOOT_BASE for Phytec's imx8mm SoM QSPI boot   Lukasz Majewski
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Raymond Mao
• [PATCH v5 02/27] mbedtls: add mbedtls into the build system   Raymond Mao
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Raymond Mao
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Raymond Mao
• [PATCH 00/10] SMBIOS improvements   Raymond Mao
• [PATCH 01/10] sysinfo: Add sysinfo API for accessing data area   Raymond Mao
• [PATCH 02/10] sysinfo: Add sysinfo driver and data structure for SMBIOS   Raymond Mao
• [PATCH 03/10] smbios: Refactor SMBIOS library   Raymond Mao
• [PATCH 04/10] smbios: ignore the non-existence of platform sysinfo detect   Raymond Mao
• [PATCH 05/10] armv8: Add arch-specific sysinfo driver   Raymond Mao
• [PATCH 06/10] sysinfo: Add sysinfo driver for SMBIOS type 7   Raymond Mao
• [PATCH 07/10] smbios: Add support to SMBIOS type 7   Raymond Mao
• [PATCH 08/10] armv8: Add sysinfo driver for cache information   Raymond Mao
• [PATCH 09/10] configs: Enable sysinfo for QEMU Arm64   Raymond Mao
• [PATCH 10/10] tests: update smbios pytest   Raymond Mao
• [PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot   Raymond Mao
• [PATCH v6 01/28] CI: Exclude MbedTLS subtree for CONFIG checks   Raymond Mao
• [PATCH v6 02/28] mbedtls: add mbedtls into the build system   Raymond Mao
• [PATCH v6 03/28] lib: Adapt digest header files to MbedTLS   Raymond Mao
• [PATCH v6 04/28] md5: Remove md5 non-watchdog API   Raymond Mao
• [PATCH v6 05/28] sha1: Remove sha1 non-watchdog API   Raymond Mao
• [PATCH v6 06/28] mbedtls: add digest shim layer for MbedTLS   Raymond Mao
• [PATCH v6 07/28] hash: integrate hash on mbedtls   Raymond Mao
• [PATCH v6 08/28] mbedtls: Enable smaller implementation for SHA256/512   Raymond Mao
• [PATCH v6 09/28] mbedtls/external: support Microsoft Authentication Code   Raymond Mao
• [PATCH v6 10/28] mbedtls/external: support PKCS9 Authenticate Attributes   Raymond Mao
• [PATCH v6 11/28] mbedtls/external: support decoding multiple signer's cert   Raymond Mao
• [PATCH v6 12/28] mbedtls/external: update MbedTLS PKCS7 test suites   Raymond Mao
• [PATCH v6 13/28] public_key: move common functions to public key helper   Raymond Mao
• [PATCH v6 14/28] x509: move common functions to x509 helper   Raymond Mao
• [PATCH v6 15/28] pkcs7: move common functions to PKCS7 helper   Raymond Mao
• [PATCH v6 16/28] mbedtls: add public key porting layer   Raymond Mao
• [PATCH v6 17/28] lib/crypto: Adapt public_key header with MbedTLS   Raymond Mao
• [PATCH v6 18/28] mbedtls: add X509 cert parser porting layer   Raymond Mao
• [PATCH v6 19/28] lib/crypto: Adapt x509_cert_parser to MbedTLS   Raymond Mao
• [PATCH v6 20/28] mbedtls: add PKCS7 parser porting layer   Raymond Mao
• [PATCH v6 21/28] lib/crypto: Adapt PKCS7 parser to MbedTLS   Raymond Mao
• [PATCH v6 22/28] mbedtls: add MSCode parser porting layer   Raymond Mao
• [PATCH v6 23/28] lib/crypto: Adapt mscode_parser to MbedTLS   Raymond Mao
• [PATCH v6 24/28] mbedtls: add RSA helper layer on MbedTLS   Raymond Mao
• [PATCH v6 25/28] lib/rypto: Adapt rsa_helper to MbedTLS   Raymond Mao
• [PATCH v6 26/28] asn1_decoder: add build options for ASN1 decoder   Raymond Mao
• [PATCH v6 27/28] test: Remove ASN1 library test   Raymond Mao
• [PATCH v6 28/28] configs: enable MbedTLS as default setting   Raymond Mao
• [PATCH 0/5] clk: mediatek: mt7623: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH 1/5] clk: mediatek: mt7623: fix broken peri_cgs clk with XTAL parents   Christian Marangi
• [PATCH 2/5] clk: mediatek: mt7623: split clk tree to dedicated topckgen and apmixed   Christian Marangi
• [PATCH 3/5] clk: mediatek: mt7623: define id_offs_map and import clk ID from upstream   Christian Marangi
• [PATCH 4/5] clk: mediatek: mt7623: remap apmixedsys clock ID   Christian Marangi
• [PATCH 5/5] clk: mediatek: mt7623: remap peri clock ID and add MUX   Christian Marangi
• [PATCH 0/8] clk: mediatek: mt7622: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH 1/8] clk: mediatek: mt7622: fix broken peri_cgs clk with XTAL parents   Christian Marangi
• [PATCH 2/8] clk: mediatek_ mt7622: rename AUDIO_AWB3 to AUDIO_AWB2   Christian Marangi
• [PATCH 3/8] clk: mediatek: mt7622: move INFRA_TRNG to the bottom   Christian Marangi
• [PATCH 4/8] clk: mediatek: mt7622: add missing clock define for MAIN_CORE_EN   Christian Marangi
• [PATCH 5/8] clk: mediatek: mt7622: add missing clock MUX1_SEL   Christian Marangi
• [PATCH 6/8] clk: mediatek: mt7622: add missing clock PERI_UART4_PD   Christian Marangi
• [PATCH 7/8] clk: mediatek: mt7622: add missing clock PERIBUS_SEL clock   Christian Marangi
• [PATCH 8/8] clk: mediatek: mt7622: add missing A1/2SYS clock ID   Christian Marangi
• [PATCH 00/14] clk: mediatek: mt7981: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH 01/14] clk: mediatek: mt7981: add missing clock for infra_ipcie_pipe   Christian Marangi
• [PATCH 02/14] clk: mediatek: mt7981: fix typo for infra_i2c0_ck   Christian Marangi
• [PATCH 03/14] clk: mediatek: mt7981: fix wrong mux width for pwm2 and pwm1 clock   Christian Marangi
• [PATCH 04/14] clk: mediatek: mt7981: fix wrong clock definition for spi2   Christian Marangi
• [PATCH 05/14] clk: mediatek: mt7981: add missing clock for spi1 node   Christian Marangi
• [PATCH 06/14] clk: mediatek: mt7981: swap wrong clock-names for spi nodes   Christian Marangi
• [PATCH 07/14] clk: mediatek: mt7981: fix wrong parent for TOP_FAUD clock   Christian Marangi
• [PATCH 08/14] clk: mediatek: mt7981: fix wrong parent list for INFRA_PWM1_SEL mux   Christian Marangi
• [PATCH 09/14] clk: mediatek: mt7981: implement sgmii0/1 clock   Christian Marangi
• [PATCH 10/14] clk: mediatek: mt7981: drop 1/1 spurious factor   Christian Marangi
• [PATCH 11/14] clk: mediatek: mt7981: replace infracfg ID with upstream linux   Christian Marangi
• [PATCH 12/14] clk: mediatek: mt7981: fix support for pwm3 clock   Christian Marangi
• [PATCH 13/14] clk: mediatek: mt7981: convert to unified infracfg gates + muxes   Christian Marangi
• [PATCH 14/14] clk: mediatek: mt7981: rename CK to CLK   Christian Marangi
• [PATCH 00/13] clk: mediatek: mt7988: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH 01/13] clk: mediatek: mt7988: rename CB_CKSQ_40M to TOP_XTAL   Christian Marangi
• [PATCH 02/13] clk: mediatek: mt7988: rename TOP_DA_SELM_XTAL_SEL to TOP_DA_SEL   Christian Marangi
• [PATCH 03/13] clk: mediatek: mt7988: rename TOP_CK_NPU_SEL_CM_TOPS_SEL to TOP_NPU_SEL   Christian Marangi
• [PATCH 04/13] clk: mediatek: mt7988: move INFRA_PCIE_PERI_26M_CK_Px clock at top   Christian Marangi
• [PATCH 05/13] clk: mediatek: mt7988: fix wrong parent for INFRA_PCIE_PERI_26M_CK_P2   Christian Marangi
• [PATCH 06/13] clk: mediatek: mt7988: drop 1/1 infracfg spurious factor   Christian Marangi
• [PATCH 07/13] clk: mediatek: mt7988: rename TOPCKGEN factor clock to upstream naming   Christian Marangi
• [PATCH 08/13] clk: mediatek: mt7988: reorder TOPCKGEN factor ID   Christian Marangi
• [PATCH 09/13] clk: mediatek: mt7988: drop 1/1 spurious factor for topckgen   Christian Marangi
• [PATCH 10/13] clk: mediatek: mt7988: comment out infracfg clk not defined   Christian Marangi
• [PATCH 11/13] clk: mediatek: mt7988: replace clock ID with upstream linux   Christian Marangi
• [PATCH 12/13] clk: mediatek: mt7988: convert to unified infracfg gates + muxes   Christian Marangi
• [PATCH 13/13] clk: mediatek: mt7988: rename CK to CLK   Christian Marangi
• [PATCH 00/15] clk: mediatek: mt7986: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH 01/15] clk: mediatek: mt7986: fix wrong shift for PCIe clocks   Christian Marangi
• [PATCH 02/15] clk: mediatek: mt7986: rename CB_CKSQ_40M to TOP_XTAL   Christian Marangi
• [PATCH 03/15] clk: mediatek: mt7986: rename 66M_MCK to SYSAXI_D2   Christian Marangi
• [PATCH 04/15] clk: mediatek: mt7986: fix wrong parent for INFRA_ADC_26M_CK   Christian Marangi
• [PATCH 05/15] clk: mediatek: mt7986: drop 1/1 infracfg spurious factor   Christian Marangi
• [PATCH 06/15] clk: mediatek: mt7986: add missing entry for IPCIE_PIPE_CK infra gate   Christian Marangi
• [PATCH 07/15] clk: mediatek: mt7986: fix typo for infra_i2c0_ck   Christian Marangi
• [PATCH 08/15] clk: mediatek: mt7986: rename TOPCKGEN factor clock to upstream naming   Christian Marangi
• [PATCH 09/15] clk: mediatek: mt7986: reorder TOPCKGEN factor ID   Christian Marangi
• [PATCH 10/15] clk: mediatek: mt7986: drop 1/1 spurious factor for topckgen   Christian Marangi
• [PATCH 11/15] clk: mediatek: mt7986: comment out CK_TOP_A_TUNER as not used   Christian Marangi
• [PATCH 12/15] clk: mediatek: mt7986: move INFRA_TRNG_CK to the bottom of the list   Christian Marangi
• [PATCH 13/15] clk: mediatek: mt7986: replace infracfg ID with upstream linux   Christian Marangi
• [PATCH 14/15] clk: mediatek: mt7986: convert to unified infracfg gates + muxes   Christian Marangi
• [PATCH 15/15] clk: mediatek: mt7986: rename CK to CLK   Christian Marangi
• [PATCH v2 0/8] clk: mediatek: mt7622: clk migration for OF_UPSTREAM   Christian Marangi
• [PATCH v2 1/8] clk: mediatek: mt7622: fix broken peri_cgs clk with XTAL parents   Christian Marangi
• [PATCH v2 2/8] clk: mediatek: mt7622: rename AUDIO_AWB3 to AUDIO_AWB2   Christian Marangi
• [PATCH v2 3/8] clk: mediatek: mt7622: move INFRA_TRNG to the bottom   Christian Marangi
• [PATCH v2 4/8] clk: mediatek: mt7622: add missing clock define for MAIN_CORE_EN   Christian Marangi
• [PATCH v2 5/8] clk: mediatek: mt7622: add missing clock MUX1_SEL   Christian Marangi
• [PATCH v2 6/8] clk: mediatek: mt7622: add missing clock PERI_UART4_PD   Christian Marangi
• [PATCH v2 7/8] clk: mediatek: mt7622: add missing clock PERIBUS_SEL clock   Christian Marangi
• [PATCH v2 8/8] clk: mediatek: mt7622: add missing A1/2SYS clock ID   Christian Marangi
• [PATCH v2 0/9] led: introduce LED boot and activity function   Christian Marangi
• [PATCH v2 1/9] led: turn LED ON on initial SW blink   Christian Marangi
• [PATCH v2 2/9] led: implement led_set_state/period_by_label   Christian Marangi
• [PATCH v2 3/9] led: implement LED boot API   Christian Marangi
• [PATCH v2 4/9] common: board_r: rework BOOT LED handling   Christian Marangi
• [PATCH v2 5/9] led: implement LED activity API   Christian Marangi
• [PATCH v2 6/9] tftp: implement support for LED activity   Christian Marangi
• [PATCH v2 7/9] mtd: implement support for LED activity   Christian Marangi
• [PATCH v2 8/9] ubi: implement support for LED activity   Christian Marangi
• [PATCH v2 9/9] doc: introduce led.rst documentation   Christian Marangi
• [PATCH v2 9/9] doc: introduce led.rst documentation   Christian Marangi
• [PATCH v3 0/9] led: introduce LED boot and activity function   Christian Marangi
• [PATCH v3 1/9] led: turn LED ON on initial SW blink   Christian Marangi
• [PATCH v3 2/9] led: implement led_set_state/period_by_label   Christian Marangi
• [PATCH v3 3/9] led: implement LED boot API   Christian Marangi
• [PATCH v3 4/9] common: board_r: rework BOOT LED handling   Christian Marangi
• [PATCH v3 5/9] led: implement LED activity API   Christian Marangi
• [PATCH v3 6/9] tftp: implement support for LED activity   Christian Marangi
• [PATCH v3 7/9] mtd: implement support for LED activity   Christian Marangi
• [PATCH v3 8/9] ubi: implement support for LED activity   Christian Marangi
• [PATCH v3 9/9] doc: introduce led.rst documentation   Christian Marangi
• [PATCH] pci: mediatek: add support for upstream split PCIe node   Christian Marangi
• [PATCH v3 8/9] ubi: implement support for LED activity   Christian Marangi
• [PATCH v3 8/9] ubi: implement support for LED activity   Christian Marangi
• [PATCH v3 8/9] ubi: implement support for LED activity   Christian Marangi
• [PATCH v3 1/9] led: turn LED ON on initial SW blink   Christian Marangi
• imx93 accessing MCU_BOOTROM_BASE_ADDR   Belisko Marek
• [PATCH v5 10/10] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node   Nishanth Menon
• [PATCH v5 08/10] configs: am62: Enable configs required for Ethboot   Nishanth Menon
• OF_UPSTREAM vs. additional dtbs   Nishanth Menon
• [EXTERNAL] Re: [PATCH 1/6] arm: dts: k3-j7200-r5: Add the pmic node in R5 dt   Nishanth Menon
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Ravi Minnikanti
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Ravi Minnikanti
• [PATCH] env: remove vars that are not in default env   Ravi Minnikanti
• [PATCH v2] env: remove vars that are not in default env   Ravi Minnikanti
• [PATCH v3] env: remove vars that are not in default env   Ravi Minnikanti
• [PATCH] MAINTAINERS: Update path for U-Boot environment variables YAML   Rafał Miłecki
• [PATCH v3 0/7] FUSB302 USB-C controller support   Soeren Moch
• [PATCH v3 0/7] FUSB302 USB-C controller support   Soeren Moch
• [PATCH 3/3] imx: Remove CFG_MXC_USB_PORTSC   Soeren Moch
• [PATCH v3 4/4] imx: Remove CFG_MXC_USB_PORTSC   Soeren Moch
• [PATCH v4 0/6] FUSB302 USB-C controller support   Soeren Moch
• [PATCH v3 0/7] FUSB302 USB-C controller support   Sören Moch
• [PATCH v1 00/12] Bind Syscon driver with OF_REAL   Anand Moon
• [PATCH v1 01/12] arm: rockchip: rk3399: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 02/12] arch: rockchip: rv1126: Update syscon driver binding method   Anand Moon
• [PATCH v1 03/12] arm: rockchip: rv1126: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 04/12] arm: rockchip: px30: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 05/12] arch: rockchip: rk3066: Update syscon driver binding method   Anand Moon
• [PATCH v1 06/12] arm: rockchip: rk3066: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 07/12] arch: rockchip: rk3368: Update syscon driver binding method   Anand Moon
• [PATCH v1 08/12] arm: rockchip: rk3368: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 09/12] arch: rockchip: rk3188: Update syscon driver binding method   Anand Moon
• [PATCH v1 10/12] arm: rockchip: rk3188: Remove unused syscon drivers code   Anand Moon
• [PATCH v1 11/12] arch: rockchip: rk3288: Update syscon driver binding method   Anand Moon
• [PATCH v1 12/12] arm: rockchip: rk3288: Remove unused syscon drivers code   Anand Moon
• [PATCH 0/9] Add Anbernic RG35XX-2024   Chris Morgan
• [PATCH 1/9] sunxi: H616: dram: DDR3: adjust settings   Chris Morgan
• [PATCH 2/9] sunxi: H616: dram: LPDDR3: adjust settings   Chris Morgan
• [PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings   Chris Morgan
• [PATCH 4/9] sunxi: H616: DRAM: Add alternative pin mapping   Chris Morgan
• [PATCH 5/9] sunxi: H616: DRAM: Adjust configuration procedure   Chris Morgan
• [PATCH 6/9] sunxi: H616: DRAM: Adjust size scan procedure   Chris Morgan
• [PATCH 7/9] sunxi: H616: dram: Update mbus priorities   Chris Morgan
• [PATCH 8/9] sunxi: dts: arm/arm64: update sun50i-h616.dtsi from Linux-v6.11-rc1   Chris Morgan
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Chris Morgan
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Chris Morgan
• [PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings   Chris Morgan
• [PATCH 3/9] sunxi: H616: dram: LPDDR4: adjust settings   Chris Morgan
• [PATCH V2 0/9] Add Anbernic RG35XX-2024   Chris Morgan
• [PATCH V2 1/9] sunxi: H616: dram: LPDDR4: adjust settings   Chris Morgan
• [PATCH V2 2/9] sunxi: H616: DRAM: Add alternative pin mapping   Chris Morgan
• [PATCH V2 3/9] sunxi: H616: DRAM: Adjust configuration procedure   Chris Morgan
• [PATCH V2 4/9] sunxi: H616: DRAM: Adjust size scan procedure   Chris Morgan
• [PATCH V2 5/9] sunxi: H616: dram: Update mbus priorities   Chris Morgan
• [PATCH V2 6/9] arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes   Chris Morgan
• [PATCH V2 7/9] sunxi: Correct TPR6 parameter for H616 DRAM driver   Chris Morgan
• [PATCH V2 8/9] arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c   Chris Morgan
• [PATCH V2 9/9] sunxi: Add support for Anbernic RG35XX-2024   Chris Morgan
• [PATCH V3 0/9] Add Anbernic RG35XX-2024   Chris Morgan
• [PATCH V3 1/9] sunxi: H616: dram: LPDDR4: adjust settings   Chris Morgan
• [PATCH V3 2/9] sunxi: H616: DRAM: Add alternative pin mapping   Chris Morgan
• [PATCH V3 3/9] sunxi: H616: DRAM: Adjust configuration procedure   Chris Morgan
• [PATCH V3 4/9] sunxi: H616: DRAM: Adjust size scan procedure   Chris Morgan
• [PATCH V3 5/9] sunxi: H616: dram: Update mbus priorities   Chris Morgan
• [PATCH V3 6/9] sunxi: Correct TPR6 parameter for H616 DRAM driver   Chris Morgan
• [PATCH V3 7/9] arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes   Chris Morgan
• [PATCH V3 8/9] arm64: dts: allwinner: h616: Change RG35XX PMIC to r_i2c   Chris Morgan
• [PATCH V3 9/9] sunxi: Add support for Anbernic RG35XX-2024   Chris Morgan
• [PATCH v5] board: rockchip: add Radxa ROCK 3 Model C   Maxim Moskalets
• [PATCH v6] board: rockchip: add Radxa ROCK 3 Model C   Maxim Moskalets
• [PATCH] lib: move phdr increment to for loop heading   Maxim Moskalets
• [PATCH v4] board: rockchip: add Radxa ROCK 3 Model C   Maxim M. Moskalets
• [PATCH v4] board: rockchip: add Radxa ROCK 3 Model C   FUKAUMI Naoki
• [PATCH 5/5] board: rockchip: Add Radxa ZERO 3W/3E   FUKAUMI Naoki
• [PATCH 2/2] board: rockchip: Add Radxa ROCK 3B   FUKAUMI Naoki
• [PATCH v4] board: rockchip: add Radxa ROCK 3 Model C   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: disable "usb_host0_ohci" to make boot faster for Radxa ROCK 3A   FUKAUMI Naoki
• [PATCH] configs: rockchip: enable USB gadget functions for Radxa ROCK 3A   FUKAUMI Naoki
• [PATCH v4] board: rockchip: add Radxa ROCK 3 Model C   FUKAUMI Naoki
• [PATCH] configs: rockchip: enable USB gadget functions for Radxa ROCK 3A   FUKAUMI Naoki
• [PATCH] arm64: dts: rockchip: change spi-max-frequency for Radxa ROCK 3C   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: sort usbdp_phy nodes for Radxa ROCK 5B   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: sort usbdp_phy nodes for Radxa ROCK 5B   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: remove upstreamed props for Radxa ROCK 3A   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: remove upstreamed props for Radxa ROCK 5B   FUKAUMI Naoki
• [PATCH] configs: rockchip: enable "ums" command for Radxa ROCK 5B   FUKAUMI Naoki
• [PATCH v5] board: rockchip: add Radxa ROCK 3 Model C   FUKAUMI Naoki
• [PATCH 1/2] configs: rockchip: enable gpio-leds driver for Radxa boards   FUKAUMI Naoki
• [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: fix dts for Radxa ROCK 4C+   FUKAUMI Naoki
• [PATCH v2 1/2] configs: rockchip: enable gpio-leds driver for Radxa boards   FUKAUMI Naoki
• [PATCH v2 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: disable "usb_host0_ohci" to make boot faster for Radxa ROCK 3A   FUKAUMI Naoki
• [PATCH v6] board: rockchip: add Radxa ROCK 3 Model C   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: fix dts for Radxa ROCK 4C+   FUKAUMI Naoki
• [PATCH 8/8] rockchip: rk3308-rock-pi-s: Enable LED and IO Domain driver   FUKAUMI Naoki
• [PATCH v2] arm: dts: rockchip: fix dts for Radxa ROCK 4C+   FUKAUMI Naoki
• [PATCH 1/2] configs: rockchip: enable gpio-leds driver for Radxa boards   FUKAUMI Naoki
• [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards   FUKAUMI Naoki
• [PATCH 1/2] arm64: dts: rockchip: add (but disabled) SFC node for Radxa ROCK 5A   FUKAUMI Naoki
• [PATCH 2/2] arm: dts: rockchip: add support for Radxa ROCK 5A with SPI NOR flash module   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: add support for SPI NOR flash on Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH] arm: dts: rockchip: add support for SPI NOR flash on Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH] rockchip: add SPI NOR flash support for Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH v2] rockchip: add SPI NOR flash support for Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH] rockchip: add SPI NOR flash support for Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH 1/2] configs: rockchip: enable gpio-leds driver for Radxa boards   FUKAUMI Naoki
• [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards   FUKAUMI Naoki
• [PATCH v2 1/2] arm64: dts: rockchip: add (but disabled) SFC node for Radxa ROCK 5A   FUKAUMI Naoki
• [PATCH v2 2/2] rockchip: add support for Radxa ROCK 5A with SPI NOR flash module   FUKAUMI Naoki
• [PATCH] rockchip: add SPI NOR flash support for Radxa E25(CM3I)   FUKAUMI Naoki
• [PATCH] rockchip: modify devicetree at runtime for Radxa ROCK Pi E v3.0   FUKAUMI Naoki
• [PATCH] led: gpio: handle GPIO_ACTIVE_LOW flag properly   FUKAUMI Naoki
• [PATCH] led: gpio: handle GPIO_ACTIVE_LOW flag properly   FUKAUMI Naoki
• [PATCH v3 0/5] net: dwc_eth_qos: Add glue driver for Intel MAC   Philip Oberfichtner
• [PATCH v4 0/5] net: dwc_eth_qos: Add glue driver for Intel MAC   Philip Oberfichtner
• [PATCH v4 1/5] x86: provide mb() macro   Philip Oberfichtner
• [PATCH v4 2/5] net: dwc_eth_qos: Fix header to be self-contained   Philip Oberfichtner
• [PATCH v4 3/5] net: dwc_eth_qos: Adapt probe() for PCI devices   Philip Oberfichtner
• [PATCH v4 4/5] net: dwc_eth_qos: Implement bind() for PCI devices   Philip Oberfichtner
• [PATCH v4 5/5] net: dwc_eth_qos: Add glue driver for Intel MAC   Philip Oberfichtner
• [PATCH] imx: ele_ahab: Add HUK derivation support   Mathieu Othacehe
• [PATCH v2] imx: ele_ahab: Add HUK derivation support   Mathieu Othacehe
• [PATCH] imx: ele_ahab: Add HUK derivation support   Mathieu Othacehe
• [PATCH v3] imx: ele_ahab: Add HUK derivation support   Mathieu Othacehe
• [PATCH v2] imx: ele_ahab: Add HUK derivation support   Mathieu Othacehe
• [PATCH] spl: spl_load: fix comparison between negative error code and unsigned size   Daniel Palmer
• [PATCH 00/11] mach-snapdragon: various improvements for newer boards   Luka Panio
• [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• [PATCH] lib: crypto: fix ASYMMETRIC_KEY_TYPE dependency   Tomas Paukrt
• Re: [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• Re: [PATCH] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• [PATCH v2] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• RE: [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• [PATCH v4] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• Re: [PATCH v4] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Tomas Paukrt
• [PATCH 1/2] watchdog: Add a driver for the photonicat watchdog   Coia Prant
• [PATCH 1/2] watchdog: Add a driver for the photonicat watchdog   Coia Prant
• [PATCH] mkimage: ecdsa: add signature/key nodes to dtb if missing   Matthias Pritschet
• [PATCH] mkimage: ecdsa: add signature/key nodes to dtb if missing   Matthias Pritschet
• [PATCH] mkimage: ecdsa: add nodes to signature/key node   Matthias Pritschet
• [PATCH v4 14/38] arm: dts: exynos: Add upstream DW MMC properties to all Exynos dts   Sam Protsenko
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Sam Protsenko
• [PATCH v5 01/38] mmc: dw_mmc: Remove unused version field from struct dwmci_host   Sam Protsenko
• [PATCH v5 02/38] mmc: dw_mmc: Move struct idmac to dw_mmc.c   Sam Protsenko
• [PATCH v5 03/38] mmc: dw_mmc: Extract waiting for data busy into a separate routine   Sam Protsenko
• [PATCH v5 04/38] mmc: dw_mmc: Extract FIFO init into a separate routine   Sam Protsenko
• [PATCH v5 05/38] mmc: dw_mmc: Extract divider update to a separate function   Sam Protsenko
• [PATCH v5 06/38] mmc: dw_mmc: Extract FIFO data transfer into a separate routine   Sam Protsenko
• [PATCH v5 07/38] mmc: dw_mmc: Extract DMA transfer handling code into a separate routine   Sam Protsenko
• [PATCH v5 08/38] mmc: dw_mmc: Extract setting the DMA descriptor into a separate routine   Sam Protsenko
• [PATCH v5 09/38] mmc: dw_mmc: Improve 32-bit IDMAC descriptor namings   Sam Protsenko
• [PATCH v5 10/38] mmc: dw_mmc: Add support for 64-bit IDMAC   Sam Protsenko
• [PATCH v5 11/38] mmc: dw_mmc: Replace fifoth_val property with fifo-depth   Sam Protsenko
• [PATCH v5 12/38] mmc: dw_mmc: Fix kernel-doc comments in dwmmc.h   Sam Protsenko
• [PATCH v5 13/38] mmc: dw_mmc: Improve coding style   Sam Protsenko
• [PATCH v5 14/38] arm: dts: exynos: Add upstream DW MMC properties to all Exynos dts   Sam Protsenko
• [PATCH v5 15/38] dt-bindings: exynos: Update bindings doc for DW MMC controller   Sam Protsenko
• [PATCH v5 16/38] arm: exynos: Add header guard for dwmmc.h   Sam Protsenko
• [PATCH v5 17/38] mmc: exynos_dw_mmc: Fix obtaining the base address of controller   Sam Protsenko
• [PATCH v5 18/38] mmc: exynos_dw_mmc: Fix getting private data in exynos_dwmci_board_init()   Sam Protsenko
• [PATCH v5 19/38] mmc: exynos_dw_mmc: Don't call pinmux functions on ARM64 chips   Sam Protsenko
• [PATCH v5 20/38] mmc: exynos_dw_mmc: Obtain and use CIU clock via CCF API   Sam Protsenko
• [PATCH v5 21/38] mmc: exynos_dw_mmc: Use .of_to_plat for device tree parsing   Sam Protsenko
• [PATCH v5 22/38] mmc: exynos_dw_mmc: Convert to use livetree API   Sam Protsenko
• [PATCH v5 23/38] mmc: exynos_dw_mmc: Read upstream SDR timing properties   Sam Protsenko
• [PATCH v5 24/38] mmc: exynos_dw_mmc: Abstract CLKSEL register   Sam Protsenko
• [PATCH v5 25/38] mmc: exynos_dw_mmc: Refactor fixed CIU clock divider   Sam Protsenko
• [PATCH v5 26/38] mmc: exynos_dw_mmc: Read common bus-width property   Sam Protsenko
• [PATCH v5 27/38] mmc: exynos_dw_mmc: Read common clock-frequency property   Sam Protsenko
• [PATCH v5 28/38] mmc: exynos_dw_mmc: Move quirks from struct dwmci_host to chip data   Sam Protsenko
• [PATCH v5 29/38] mmc: exynos_dw_mmc: Read and use DDR timing when available   Sam Protsenko
• [PATCH v5 30/38] mmc: exynos_dw_mmc: Set requested freq in get_mmc_clk() callback   Sam Protsenko
• [PATCH v5 31/38] mmc: exynos_dw_mmc: Add support for ARM64 Exynos chips   Sam Protsenko
• [PATCH v5 32/38] mmc: exynos_dw_mmc: Pull all init code into probe function   Sam Protsenko
• [PATCH v5 33/38] mmc: exynos_dw_mmc: Don't call dwmci_setup_cfg() after add_dwmci()   Sam Protsenko
• [PATCH v5 34/38] mmc: exynos_dw_mmc: Use dev->name as driver's displayed name   Sam Protsenko
• [PATCH v5 35/38] mmc: exynos_dw_mmc: Improve coding style   Sam Protsenko
• [PATCH v5 36/38] arm: dts: exynos: Remove outdated DW MMC properties in all Exynos dts   Sam Protsenko
• [PATCH v5 37/38] configs: e850-96: Enable MMC   Sam Protsenko
• [PATCH v5 38/38] doc: samsung: Mention enabled eMMC in E850-96 board doc   Sam Protsenko
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Sam Protsenko
• [PATCH] clk: Propagate clk_set_rate() if CLK_SET_PARENT_RATE present   Sam Protsenko
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Sam Protsenko
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Sam Protsenko
• [PATCH] android_ab: Fix backup offset calculation   Sam Protsenko
• [PATCH] tools: imagetool: Remove unnecessary check from toc0_verify_cert_item()   Andre Przywara
• [PATCH] tools: imagetool: Remove unnecessary check from toc0_verify_cert_item()   Andre Przywara
• [PATCH 9/9] sunxi: Add support for Anbernic RG35XX-2024   Andre Przywara
• [PATCH v2 1/2] spi: sunxi: fix CDR2 calculation   Andre Przywara
• [PATCH v2 2/2] spi: sunxi: fix clock divider calculation for max frequency setting   Andre Przywara
• Pull request: u-boot-sunxi/master for v2024.10   Andre Przywara
• [PATCH 1/1] tools: fix signature of toc0_verify_cert_item()   Andre Przywara
• [PATCH 0/6] bootstd: sunxi: Migrate to standard boot   Andre Przywara
• [PATCH 0/6] bootstd: sunxi: Migrate to standard boot   Andre Przywara
• [PATCH V2 9/9] sunxi: Add support for Anbernic RG35XX-2024   Andre Przywara
• [PATCH V2 2/9] sunxi: H616: DRAM: Add alternative pin mapping   Andre Przywara
• [PATCH] mtd: nand: raw: omap_gpmc: Check return value of gpmc_nand_init   Roger Quadros
• [PATCH] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   Roger Quadros
• [PATCH v2] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   Roger Quadros
• [PATCH v6 05/11] soc: ti: k3-navss-ringacc: Fix reconfiguration of qmode API   Vignesh Raghavendra
• How to retrieve cpu info from u-boot fucntion?   Sourabh Hegde Ramu
• How to retrieve cpu info from u-boot fucntion?   Sourabh Hegde Ramu
• [PATCH v2 4/4] squashfs: Fix stack overflow while symlink resolving   Miquel Raynal
• [PATCH] squashfs: Fix heap corruption in sqfs_search_dir()   Miquel Raynal
• [RESEND PATCH v4 10/10] mtd: nand: add initial ecc engine support   Miquel Raynal
• [PATCH 1/6] usb: gadget: Inline usb_add_gadget_udc_release   Miquel Raynal
• [PATCH v3 0/7] FUSB302 USB-C controller support   Sebastian Reichel
• [PATCH v3 1/7] usb: tcpm: add core framework   Sebastian Reichel
• [PATCH v3 2/7] usb: tcpm: fusb302: add driver   Sebastian Reichel
• [PATCH v3 3/7] board: rock5b-rk3588: add USB-C controller support   Sebastian Reichel
• [PATCH v3 4/7] board: rock5b-rk3588: enable USB-C in operating system   Sebastian Reichel
• [PATCH v3 5/7] rockchip: rk3588-rock-5b: Add USB-C controller to u-boot.dtsi   Sebastian Reichel
• [PATCH v3 6/7] rockchip: rock5b-rk3588: Enable USB-C PD support   Sebastian Reichel
• [PATCH v3 7/7] MAINTAINERS: add TCPM section   Sebastian Reichel
• [PATCH v3 4/7] board: rock5b-rk3588: enable USB-C in operating system   Sebastian Reichel
• [PATCH v3 3/7] board: rock5b-rk3588: add USB-C controller support   Sebastian Reichel
• [PATCH v3 0/7] FUSB302 USB-C controller support   Sebastian Reichel
• [PATCH v3 0/7] FUSB302 USB-C controller support   Sebastian Reichel
• [PATCH v4 0/6] FUSB302 USB-C controller support   Sebastian Reichel
• [PATCH v4 1/6] usb: tcpm: add core framework   Sebastian Reichel
• [PATCH v4 2/6] usb: tcpm: fusb302: add driver   Sebastian Reichel
• [PATCH v4 3/6] board: rock5b-rk3588: enable USB-C in operating system   Sebastian Reichel
• [PATCH v4 4/6] rockchip: rk3588-rock-5b: Add USB-C controller to u-boot.dtsi   Sebastian Reichel
• [PATCH v4 5/6] rockchip: rock5b-rk3588: Enable USB-C PD support   Sebastian Reichel
• [PATCH v4 6/6] MAINTAINERS: add TCPM section   Sebastian Reichel
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Oliver Gaskell via B4 Relay
• [PATCH 01/20] arm: dts: Support SC573-EZKIT   Oliver Gaskell via B4 Relay
• [PATCH 02/20] arm: dts: Support SC584-EZKIT   Oliver Gaskell via B4 Relay
• [PATCH 03/20] arm: dts: Support SC589-MINI   Oliver Gaskell via B4 Relay
• [PATCH 04/20] arm: dts: Support SC589-EZKIT   Oliver Gaskell via B4 Relay
• [PATCH 05/20] arm: dts: Support SC594-SOM-EZKIT   Oliver Gaskell via B4 Relay
• [PATCH 06/20] arm: dts: Support SC594-SOM-EZLITE   Oliver Gaskell via B4 Relay
• [PATCH 07/20] arm: dts: Support SC598-SOM-EZKIT   Oliver Gaskell via B4 Relay
• [PATCH 08/20] arm: dts: Support SC598-SOM-EZLITE   Oliver Gaskell via B4 Relay
• [PATCH 09/20] dt-bindings: arm: Add SC5xx Series binding   Oliver Gaskell via B4 Relay
• [PATCH 10/20] dt-bindings: clock: Add SC5xx clock tree bindings   Oliver Gaskell via B4 Relay
• [PATCH 11/20] dt-bindings: timer: Add SC5xx Timer bindings   Oliver Gaskell via B4 Relay
• [PATCH 12/20] arm: mach-sc5xx: clean up Kconfig   Oliver Gaskell via B4 Relay
• [PATCH 13/20] arm: SC598-SOM-EZKIT initial support   Oliver Gaskell via B4 Relay
• [PATCH 14/20] arm: SC598-SOM-EZLITE initial support   Oliver Gaskell via B4 Relay
• [PATCH 15/20] arm: SC594-SOM-EZKIT initial support   Oliver Gaskell via B4 Relay
• [PATCH 16/20] arm: SC594-SOM-EZLITE initial support   Oliver Gaskell via B4 Relay
• [PATCH 17/20] arm: SC584-EZKIT initial support   Oliver Gaskell via B4 Relay
• [PATCH 18/20] arm: SC589-EZKIT initial support   Oliver Gaskell via B4 Relay
• [PATCH 19/20] arm: SC589-MINI initial support   Oliver Gaskell via B4 Relay
• [PATCH 20/20] arm: SC573-EZKIT initial support   Oliver Gaskell via B4 Relay
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Teresa Remmet
• [PATCH v3] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Teresa Remmet
• [PATCH v4] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Teresa Remmet
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Teresa Remmet
• [PATCH] config: imx: Add PHYTEC's phycore-imx8mm-fspi_defconfig   Teresa Remmet
• [GIT PULL] u-boot-video/video-20240731   Tom Rini
• [PATCH v3 0/5] net: dwc_eth_qos: Add glue driver for Intel MAC   Tom Rini
• [PATCH] net: remove duplicate eth_env_set_enetaddr_by_index() declaration   Tom Rini
• [PATCH v3] net/tftp: make tftpput working with servers that do not use OACK   Tom Rini
• [PATCH v2 1/1] net: dwc_eth_qos: mdio: Implement clause 45   Tom Rini
• [PATCH v5 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v5 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH v5 03/27] lib: Adapt digest header files to MbedTLS   Tom Rini
• [PATCH v5 27/27] configs: enable MbedTLS as default setting   Tom Rini
• [PATCH 1/2] config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm   Tom Rini
• [PATCH 00/12] clk: mediatek: add OPs to support OF_UPSTREAM   Tom Rini
• [PATCH] clk: Fix error message in clk_get_bulk   Tom Rini
• [PATCH v2] clk: Revise help text for clk_get_parent_rate()   Tom Rini
• [PATCH] clk: clk-uclass: Print clk name in clk_enable/clk_disable   Tom Rini
• [PATCH v6 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v7 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v7 08/20] net-lwip: add DHCP support and dhcp commmand   Tom Rini
• [PATCH v5 00/20] Introduce the lwIP network stack   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20240802   Tom Rini
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Tom Rini
• [PATCH v1 0/1] board: tegra: convert boards to text env   Tom Rini
• [PATCH v7 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v7 0/8] Bug-fixes for a few boards   Tom Rini
• [PATCH v9 7/8] rockchip: Ensure memory size is available in RK3399 SPL   Tom Rini
• [ANN] U-Boot v2024.10-rc2 released   Tom Rini
• [GIT PULL] xilinx patches for v2024.07-rc3   Tom Rini
• Pull request: u-boot-sunxi/master for v2024.10   Tom Rini
• [PATCH v7 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Tom Rini
• [PATCH 3/4] dlmalloc: Fix integer overflow in sbrk()   Tom Rini
• [PATCH 00/12] omap configuration cleanups   Tom Rini
• [PATCH 1/3] omap: Use spl_soc_init instead of spl_board_init   Tom Rini
• [PATCH v5 0/4] alist: Implement a pointer list / array of structs   Tom Rini
• [PATCH v3 00/21] Universal Payload initial series   Tom Rini
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Tom Rini
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Tom Rini
• [PATCH v5 00/20] Introduce the lwIP network stack   Tom Rini
• [PATCH v8 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Tom Rini
• Please pull u-boot-i2c   Tom Rini
• Please pull u-boot-i2c   Tom Rini
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Tom Rini
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Tom Rini
• [PATCH v8 22/23] test/py: add HTTP (wget) test for the EFI loader   Tom Rini
• [PATCH v8 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Tom Rini
• [PULL] Pull request for u-boot-nand-20240808   Tom Rini
• [PATCH V8 0/7] Low Power Mode: Package TIFS Stub in BeaglePlay   Tom Rini
• [PATCH 00/20] i2c: Chip away at some old code   Tom Rini
• Please pull v2 u-boot-i2c   Tom Rini
• Please pull u-boot-i2c next   Tom Rini
• [PATCH v8 00/23] Introduce the lwIP network stack   Tom Rini
• Pull request for tpm-master-09082024   Tom Rini
• [PATCH v2 1/1] disk: add TegraPT support   Tom Rini
• [PATCH v2 1/3] ext4: Fix integer overflow in ext4fs_read_symlink()   Tom Rini
• [PATCH] cmd: add a fetch utility   Tom Rini
• [PATCH v4 00/21] Universal Payload initial series   Tom Rini
• Pull request efi-2024-10-rc3   Tom Rini
• Please pull u-boot-ubi   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• Pull request: u-boot-rockchip-20240812   Tom Rini
• [PATCH v2 1/1] disk: add TegraPT support   Tom Rini
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Tom Rini
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Tom Rini
• Please pull u-boot-i2c next   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20240813   Tom Rini
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Tom Rini
• [PATCH v3] driver: pwm: pwm-imx: fix probing on imx6   Tom Rini
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Tom Rini
• [PATCH v5 00/27] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH v3] driver: pwm: pwm-imx: fix probing on imx6   Tom Rini
• [PATCH v3 01/40] nvmxip: Drop the message on probe   Tom Rini
• [PATCH v3 02/40] nvmxip: Avoid probing on boot   Tom Rini
• [PATCH 06/21] mmc: Drop the blank line before accesses   Tom Rini
• [PATCH] sandbox: Fix pinmux warnings with non-test devicetrees   Tom Rini
• [PATCH v2 0/2] spi: dtb parsing fixes   Tom Rini
• [RESEND PATCH v2] cmd: led: fix led command usage for the LED_SW_BLINK enabled case   Tom Rini
• [PATCH 1/2] sandbox: Enable wget command   Tom Rini
• [PATCH v3] env: remove vars that are not in default env   Tom Rini
• [PATCH] pinmux: generic: Use ENOENT instead of ENOSYS   Tom Rini
• [PATCH] defconfig: Add a config for AM335x High Security EVM with SPI Boot support   Tom Rini
• [PATCH] arm: dts: keystone: Move to OF_UPSTREAM   Tom Rini
• [PATCH v1] lib: elf: Fix bootelf -p crash issue   Tom Rini
• [PATCH] maintainers: Update list of maintainers for Corstone-1000   Tom Rini
• [PATCH 1/1] scripts/decodecode: update from Linux v6.10   Tom Rini
• [PATCH] defconfig: Add a config for AM335x High Security EVM with SPI Boot support   Tom Rini
• [PATCH 1/3] test_fs: Allow running unprivileged   Tom Rini
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Tom Rini
• [PATCH 06/21] mmc: Drop the blank line before accesses   Tom Rini
• [PATCH v3] ext4: Improve feature checking   Tom Rini
• [PATCH v2] bootstage: Fix out-of-bounds read in reloc_bootstage()   Tom Rini
• [PATCH 1/4] x86: Fix ptrdiff_t for x86_64   Tom Rini
• [PATCH v2 1/4] squashfs: Fix integer overflow in sqfs_resolve_symlink()   Tom Rini
• [PATCH] squashfs: Fix heap corruption in sqfs_search_dir()   Tom Rini
• [PATCH v2 1/3] ext4: Fix integer overflow in ext4fs_read_symlink()   Tom Rini
• [PATCH 1/3] test/overlay: Make this depend on SANDBOX   Tom Rini
• [PATCH 2/3] test/boot: Make BOOTSTD tests depend on UT_BOOTSTD   Tom Rini
• [PATCH 3/3] test/cmd: Move wget test to under a sandbox guard   Tom Rini
• [PATCH v4 13/14] test: efi: boot: Set up an image suitable for EFI testing   Tom Rini
• [PATCH v3 04/24] test/py: Fix some pylint warnings in test_ut.py   Tom Rini
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Tom Rini
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Tom Rini
• [PATCH v2 27/32] test: cedit: use allocated address for reading file   Tom Rini
• [PATCH v8 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH v2 19/32] sandbox: move the TCG event log to the start of ram memory   Tom Rini
• [PATCH 1/3] test_fs: Allow running unprivileged   Tom Rini
• [PATCH v6 08/28] mbedtls: Enable smaller implementation for SHA256/512   Tom Rini
• [PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH 1/2] pytest: requirements.txt: Resync with the rest of the project   Tom Rini
• [PATCH 2/2] Dockerfile: Update to namespace for some labels   Tom Rini
• [PATCH v8 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH 10/10] tests: update smbios pytest   Tom Rini
• [ANN] U-Boot v2024.10-rc3 released   Tom Rini
• [PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH v6 00/28] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH 0/5] clk: mediatek: mt7623: clk migration for OF_UPSTREAM   Tom Rini
• [PATCH 00/14] clk: mediatek: mt7981: clk migration for OF_UPSTREAM   Tom Rini
• [PATCH 00/13] clk: mediatek: mt7988: clk migration for OF_UPSTREAM   Tom Rini
• [PATCH 00/15] clk: mediatek: mt7986: clk migration for OF_UPSTREAM   Tom Rini
• [PATCH v2 0/8] clk: mediatek: mt7622: clk migration for OF_UPSTREAM   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20240820   Tom Rini
• [PATCH v5 00/38] mmc: dw_mmc: Enable eMMC on E850-96 board   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20240820   Tom Rini
• [PATCH 00/35] global_data: Reduce size of struct global_data   Tom Rini
• [PATCH 1/2] pytest: requirements.txt: Resync with the rest of the project   Tom Rini
• [RFC PATCH 1/2] pci: Add TI K3 Cadence PCIe Controller   Tom Rini
• [PATCH v3 00/27] Make LMB memory map global and persistent   Tom Rini
• [PATCH v3 2/3] buildman: Allow skipping the dtc build   Tom Rini
• [PATCH v3 06/19] test: Avoid failing skipped tests   Tom Rini
• [ANN] U-Boot v2024.10-rc3 released   Tom Rini
• [PATCH v3 06/19] test: Avoid failing skipped tests   Tom Rini
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20240822   Tom Rini
• Please pull u-boot-samsung master   Tom Rini
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Tom Rini
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Tom Rini
• [PATCH v9 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH v9 34/37] configs: use syntax CONFIG_FOO=n in tools-only_defconfig   Tom Rini
• [PATCH v9 04/37] arm: omap2: add missing #include <netdev.h>   Tom Rini
• [u-boot-test-hooks PATCH v3 1/2] Create a common file for test scripts   Tom Rini
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Tom Rini
• [GIT PULL v2] Please pull u-boot-imx-next-20240823   Tom Rini
• [PATCH v4 00/14] spl: mmc: Some tweaks for SPL, particularly with MMC   Tom Rini
• [PATCH 1/3] test/overlay: Make this depend on SANDBOX   Tom Rini
• [PULL MASTER] Pull request efi-2024-10-rc4   Tom Rini
• [PATCH v9 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH 1/2] bootm: adjust the print format   Tom Rini
• [PATCH v9 00/23] Introduce the lwIP network stack   Tom Rini
• [PATCH] doc/develop/sending_patches.rst: Clarify when to use which branch   Tom Rini
• [PATCH 0/6] Remove almost all project wiki links   Tom Rini
• [PATCH 1/6] doc/arch/m68k.rst: Update toolchain comment   Tom Rini
• [PATCH 2/6] doc/arch/mips.rst: Update toolchain list   Tom Rini
• [PATCH 3/6] doc: Update rST to not reference the old wiki   Tom Rini
• [PATCH 4/6] doc/mkeficapsule.1: Update homepage link   Tom Rini
• [PATCH 5/6] bootcount: Update to point to current documentation   Tom Rini
• [PATCH 6/6] binman: Update links for sending patches   Tom Rini
• [PATCH] doc/develop/sending_patches.rst: Reword where our git tree is slightly   Tom Rini
• [PATCH v4 10/14] efi_loader: Disable ANSI output for tests   Tom Rini
• [PATCH 00/10] SMBIOS improvements   Tom Rini
• [PATCH] fs: Fix SPL build if SPL_FS_LOADER is enabled and FS_LOADER is disabled   Tom Rini
• [PATCH v2 26/35] global_data: Reduce size of early-malloc vars   Tom Rini
• [PATCH 00/10] SMBIOS improvements   Tom Rini
• [PATCH v3 00/35] global_data: Reduce size of struct global_data   Tom Rini
• [PATCH v2 00/19] Tidy up console recording in tests   Tom Rini
• xPL terminology   Tom Rini
• [PATCH v3 0/5] arch: arm: dts: ti: Add missing fss range   Tom Rini
• [PATCH 1/1] ata: dwc_ahsata: create boot device   Tom Rini
• [PATCH] omap3: omap3evm: Migrate to OF_UPSTREAM   Tom Rini
• [PATCH v2] remoteproc: uclass: Modify uc_pdata->name to use combination of device name and device's parent name   Tom Rini
• [PATCH] pci: mediatek: add support for upstream split PCIe node   Tom Rini
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Tom Rini
• [PATCH v4 0/2] bootstd: Try again to resolve infinite-loop bug   Tom Rini
• [PATCH v3] sandbox: Fix pinmux warnings with non-test devicetrees   Tom Rini
• xPL terminology   Tom Rini
• [PATCH] mtd: nand: raw: omap_gpmc: Check return value of gpmc_nand_init   Tom Rini
• [PATCH] dm: core: Show device sequence instead in dm_dump_tree()   Tom Rini
• [PATCH] cmd: bind: Use device sequence instead for driver bind/unbind   Tom Rini
• [PATCH v3] test/py: spi: Add tests for SPI flash device   Tom Rini
• [PATCH v1] gpio: npcm: Add SGPIO support for Nuvoton NPCM SoCs   Tom Rini
• [PATCH v1] timer: npcm: Change counter source   Tom Rini
• [PATCH 0/3] dm: core: Avoid multiple calls to fdt_parent_offset()   Tom Rini
• [PATCH] list: use list_count_nodes() to count list entries   Tom Rini
• [PATCH 2/2] bootstage: Do not sort records   Tom Rini
• [u-boot-test-hooks PATCH v4 1/3] Create a common file for test scripts   Tom Rini
• [PATCH] lib: move phdr increment to for loop heading   Tom Rini
• [PATCH v1] arm: dts: nuvoton: add dts support for npcm845 yosemite4   Tom Rini
• [PATCH v1] dm: core: Make SPL_DM_SEQ_ALIAS select SPL_STRTO   Tom Rini
• [PATCH] tools/scripts/Kconfig: Update references from kconfig-language.txt to rst   Tom Rini
• [PATCH] gpio: Add G7 Aspeed gpio controller driver   Tom Rini
• [PATCH v2] mmc: fix signed vs unsigned compare in read check in _spl_load()   Tom Rini
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Tom Rini
• [PATCH 1/2] bootstage: Fix unstash of records from SPL   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [PATCH] test/py/tests/test_bootstage.py: Combine stash/unstash tests   Tom Rini
• [PATCH v5 00/20] labgrid: Provide an integration with Labgrid   Tom Rini
• [PATCH 12/35] global_data: Convert have_console into a flag   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Tom Rini
• [PATCH 2/2] cmd: booti: adjust the print format   Tom Rini
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [PATCH v5 03/20] test: Pass stderr to stdout   Tom Rini
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   Tom Rini
• [PATCH 00/20] arm: Initial support for Analog Devices SC5xx boards   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20240829   Tom Rini
• [PATCH 02/19] serial: ns16550: Allow clocks to be missing   Tom Rini
• [PATCH 06/19] malloc: Show amount of used space when memory runs out   Tom Rini
• [PATCH 17/19] lib: Allow crc8 in TPL and VPL   Tom Rini
• [PATCH 18/19] boot: Imply CRC8 with VBE   Tom Rini
• [PATCH 00/19] vbe: Series part E   Tom Rini
• [u-boot-test-hooks][PATCH 1/2] bin/writer.rpi_mount: Use kernel= and simplify logic   Tom Rini
• [u-boot-test-hooks][PATCH 2/2] bin/flashair.rpi: Use kernel= and simplify logic   Tom Rini
• [u-boot-test-hooks][PATCH] labgrid: Add wrapper scripts around using labgrid-client for device control   Tom Rini
• My labgrid setup   Tom Rini
• [PATCH 00/18] vbe: Series part D   Tom Rini
• [PATCH 00/18] vbe: Series part D   Tom Rini
• [u-boot-test-hooks][PATCH 1/2] bin/writer.rpi_mount: Use kernel= and simplify logic   Tom Rini
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   Tom Rini
• My labgrid setup   Tom Rini
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Tom Rini
• [u-boot-test-hooks][PATCH 1/2] bin/writer.rpi_mount: Use kernel= and simplify logic   Tom Rini
• [PATCH] fs: Fix SPL build if SPL_FS_LOADER is enabled and FS_LOADER is disabled   Tom Rini
• [PATCH v5 00/20] labgrid: Provide an integration with Labgrid   Tom Rini
• [PATCH v2] list: use list_count_nodes() to count list entries   Tom Rini
• [PATCH] lib: crypto: fix ASYMMETRIC_KEY_TYPE dependency   Tom Rini
• [PATCH v6 00/11] Add support for Ethernet Boot on SK-AM62   Tom Rini
• RPI CM4 - I2C BUS and Device Tree   Peter Robinson
• [ANN] U-Boot v2024.10-rc3 released   Peter Robinson
• [PATCH] mkimage: ecdsa: add signature/key nodes to dtb if missing   Peter Robinson
• [PATCH 00/18] vbe: Series part D   Peter Robinson
• [PATCH 00/15] binman: More patches to support VBE   Peter Robinson
• [RESEND PATCH v3 7/9] net/tcp: simplify tcp header filling code   Peter Robinson
• [RESEND PATCH v3 6/9] net/tcp: improve tcp framework, use better state machine   Peter Robinson
• [PATCH v9 00/23] Introduce the lwIP network stack   Peter Robinson
• How to retrieve cpu info from u-boot fucntion?   Peter Robinson
• [PATCH 00/13] Miscellaneous fixes   Peter Robinson
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Peter Robinson
• Re: Grub doesn’t load devicetree   Peter Robinson
• How to retrieve cpu info from u-boot fucntion?   Peter Robinson
• Re: Grub doesn’t load devicetree   Peter Robinson
• Re: Grub doesn’t load devicetree   Peter Robinson
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Peter Robinson
• [PATCH v2 02/16] buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set   Peter Robinson
• [PATCH v2 06/16] net: fm: call dtsec_init_phy() only when it is defined   Peter Robinson
• [PATCH v2 15/16] common: update: UPDATE_COMMON implies CMD_TFTPBOOT   Peter Robinson
• [PATCH v2 16/16] cmd: pxe: CMD_PXE implies CMD_TFTPBOOT   Peter Robinson
• [PATCH 19/19] hash: Plumb crc8 into the hash functions   Peter Robinson
• [PATCHv2 3/3] i2c: imx_lpi2c: Support read transfers longer than 256 bytes   Fedor Ross
• [PATCH v1 0/3] video: tegra: implement ganged dsi mode   Svyatoslav Ryhel
• [PATCH v1 1/3] video: tegra20: dc: remove DECLARE_GLOBAL_DATA_PTR use   Svyatoslav Ryhel
• [PATCH v1 2/3] video: tegra20: dsi: add ganged mode support   Svyatoslav Ryhel
• [PATCH v1 3/3] video: panel: add Sharp LQ101R1SX01 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v1 0/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v1 1/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v1 0/1] board: tegra: convert boards to text env   Svyatoslav Ryhel
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Svyatoslav Ryhel
• [PATCH v1 0/1] board: tegra: convert boards to text env   Svyatoslav Ryhel
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Svyatoslav Ryhel
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Svyatoslav Ryhel
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Svyatoslav Ryhel
• [PATCH v1 1/1] board: tegra: convert tegra-based boards to text env   Svyatoslav Ryhel
• [PATCH v2 0/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v2 1/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v2 0/1] board: tegra: convert boards to text env   Svyatoslav Ryhel
• [PATCH v2 1/1] board: tegra: convert boards to text env   Svyatoslav Ryhel
• [PATCH v2 1/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v2 1/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v2 1/1] disk: add TegraPT support   Svyatoslav Ryhel
• [PATCH v2 1/1] board: tegra: convert boards to text env   Svyatoslav Ryhel
• [PATCH 1/4] power: regulator: Trigger probe of regulators which are always-on or boot-on   Svyatoslav Ryhel
• [PATCH] u-boot: Ensure we use BFD as linker even if using GCC for it   Otavio Salvador
• clarifying i2c_get_chip_for_busnum()   Sahaj Sarup
• clarifying i2c_get_chip_for_busnum()   Sahaj Sarup
• [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Heiko Schocher
• [PATCH] i2c: pca954x: Remove pointer to GD   Heiko Schocher
• [PATCH] i2c: mux: Fix error path in i2c-arb-gpio   Heiko Schocher
• [PATCH] i2c: mux: Fix error path in i2c-arb-gpio   Heiko Schocher
• [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Heiko Schocher
• [PATCH v2 1/2] i2c: samsung: Drop s3c24x0 specific code.   Heiko Schocher
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   Heiko Schocher
• [PATCH 01/11] board: shc: convert to DM_I2C   Heiko Schocher
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Heiko Schocher
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Heiko Schocher
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Heiko Schocher
• [PATCH] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCHv2 3/3] i2c: imx_lpi2c: Support read transfers longer than 256 bytes   Heiko Schocher
• [PATCH 10/11] board: cm_fx6: convert to DM_I2C   Heiko Schocher
• [PATCH 10/11] board: cm_fx6: convert to DM_I2C   Heiko Schocher
• [PATCHv2 3/3] i2c: imx_lpi2c: Support read transfers longer than 256 bytes   Heiko Schocher
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Heiko Schocher
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• Please pull u-boot-i2c   Heiko Schocher
• Please pull u-boot-i2c   Heiko Schocher
• Please pull v2 u-boot-i2c   Heiko Schocher
• Please pull u-boot-i2c next   Heiko Schocher
• [PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Heiko Schocher
• [PATCH V2] ubifs: Call ubifs_iput when ubifs_iget is used   Heiko Schocher
• Please pull u-boot-ubi   Heiko Schocher
• [PATCH v2 01/18] i2c: Remove board_i2c_init()   Heiko Schocher
• [PATCH v2 02/18] i2c: Remove IC2_xxx enum   Heiko Schocher
• [PATCH v2 03/18] i2c: Remove CFG_I2C_MULTI_BUS   Heiko Schocher
• [PATCH v2 04/18] mips: malta: Drop CMD_DATE   Heiko Schocher
• [PATCH v2 05/18] armv8: ls2085a: Drop CMD_DATE   Heiko Schocher
• [PATCH v2 06/18] mx28 / mx51: Drop CMD_DATE   Heiko Schocher
• [PATCH v2 07/18] MPC837XERDB: ethernut5: work_92105: Drop CMD_DATE   Heiko Schocher
• [PATCH v2 08/18] rtc: Drop CFG_SYS_RTC_BUS_NUM   Heiko Schocher
• [PATCH v2 09/18] date: Drop the legacy I2C code   Heiko Schocher
• [PATCH v2 10/18] fsl: mxc: Drop legacy I2c   Heiko Schocher
• [PATCH v2 11/18] i2c: Drop reference to SYS_I2C_INIT_BOARD   Heiko Schocher
• [PATCH v2 12/18] octeon: Drop OCTEON_I2C_FDT dead code   Heiko Schocher
• [PATCH v2 13/18] i2c: Remove I2C_SET_BUS()   Heiko Schocher
• [PATCH v2 14/18] i2c: Remove I2C_GET_BUS()   Heiko Schocher
• [PATCH v2 15/18] i2c: Drop CFG_SYS_MAX_I2C_BUS   Heiko Schocher
• [PATCH v2 16/18] i2c: Drop i2c_get_bus_num_fdt() and i2c_reset_port_fdt()   Heiko Schocher
• [PATCH v2 17/18] i2c: Remove CFG_SYS_I2C_MAX_HOPS   Heiko Schocher
• [PATCH v2 18/18] i2c: Remove CFG_SYS_I2C_DIRECT_BUS   Heiko Schocher
• [PATCH v2 00/18] i2c: Chip away at some old code   Heiko Schocher
• Please pull u-boot-i2c next   Heiko Schocher
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH v2] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH v3 8/9] ubi: implement support for LED activity   Heiko Schocher
• [PATCH v3] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH v3] driver: pwm: pwm-imx: fix probing on imx6   Heiko Schocher
• [PATCH 03/13] at91: rename mem_init() to at91_mem_init()   Heiko Schocher
• [PATCH 1/1] Makefile: don't use CFLAGS for environment text file   Heinrich Schuchardt
• [PATCH v3] doc: document the pwm command   Heinrich Schuchardt
• [PATCH v3] doc: document the pwm command   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: correct description of efi_get_distro_fdt_name   Heinrich Schuchardt
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Heinrich Schuchardt
• [PATCH v2 25/39] efi: Use puts() in cout so that console recording works   Heinrich Schuchardt
• [PATCH v2 27/39] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE   Heinrich Schuchardt
• [PATCH v2 28/39] efi_loader: Shorten the app rules   Heinrich Schuchardt
• [PATCH v2 29/39] efi_loader: Shorten the app rules further   Heinrich Schuchardt
• [PATCH v2 30/39] efi: Show the vendor in helloworld   Heinrich Schuchardt
• [PATCH v2 31/39] Revert "bootdev: avoid infinite probe loop"   Heinrich Schuchardt
• [PATCH v2 36/39] efi: Add a test app   Heinrich Schuchardt
• [PATCH v2 37/39] efi: Avoid using sandbox virtio devices   Heinrich Schuchardt
• [PATCH v2 06/39] bootstd: Create a function to reset USB   Heinrich Schuchardt
• [PATCH 1/1] ata: sata_rescan must scan for block devices   Heinrich Schuchardt
• [PATCH] configs: enable efidebug and EFI http boot on QEMU aarch64   Heinrich Schuchardt
• [PATCH 1/1] boot: set correct block device name in set_efi_bootdev()   Heinrich Schuchardt
• [PATCH 1/1] ata: dwc_ahsata: create boot device   Heinrich Schuchardt
• [PATCH v2 1/1] ata: sata_rescan must scan for block devices   Heinrich Schuchardt
• [PATCH v2 06/39] bootstd: Create a function to reset USB   Heinrich Schuchardt
• [PATCH v2 36/39] efi: Add a test app   Heinrich Schuchardt
• [PATCH v2 1/1] disk: add TegraPT support   Heinrich Schuchardt
• [PATCH] cmd: add a fetch utility   Heinrich Schuchardt
• [PATCH v2 3/3] ext4: Fix zalloc()   Heinrich Schuchardt
• [PATCH 1/1] tools: fix signature of toc0_verify_cert_item()   Heinrich Schuchardt
• [PATCH v2 1/3] ext4: Fix integer overflow in ext4fs_read_symlink()   Heinrich Schuchardt
• [PATCH v2 1/3] efi: Allow use of malloc() for the EFI pool   Heinrich Schuchardt
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Heinrich Schuchardt
• [PATCH 1/1] scripts/decodecode: update from Linux v6.10   Heinrich Schuchardt
• [PATCH v2 3/3] efi: Show the location of the bounce buffer   Heinrich Schuchardt
• Pull request efi-2024-10-rc3   Heinrich Schuchardt
• [PATCH 1/1] riscv: CONFIG_SPL_FRAMEPOINTER must depend on CONFIG_SPL   Heinrich Schuchardt
• [PATCH 0/2] riscv: show registers in crash dumps by default   Heinrich Schuchardt
• [PATCH 1/2] riscv: allow to enable SHOW_REGS in main U-Boot only   Heinrich Schuchardt
• [PATCH 2/2] riscv: show registers in crash dumps by default   Heinrich Schuchardt
• [PATCH 1/1] cmd: add rdcycle test to RISC-V exception command   Heinrich Schuchardt
• [PATCH v3 31/40] efi: Show the vendor in helloworld   Heinrich Schuchardt
• [PATCH v3 1/9] led: turn LED ON on initial SW blink   Heinrich Schuchardt
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Heinrich Schuchardt
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Heinrich Schuchardt
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Heinrich Schuchardt
• [PATCH] tools/mkeficapsule: correct printf codes   Heinrich Schuchardt
• [PATCH v3 1/1] ata: sata_rescan must scan for block devices   Heinrich Schuchardt
• [PATCH 1/1] tools/mkeficapsule: correct printf codes   Heinrich Schuchardt
• [PATCH v1 3/3] board: qemu-riscv: Override enable_caches   Heinrich Schuchardt
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Heinrich Schuchardt
• [PATCH v1 3/3] board: qemu-riscv: Override enable_caches   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: allow EFI_LOADER_BOUNCE_BUFFER on all architectures   Heinrich Schuchardt
• [PULL MASTER] Pull request efi-2024-10-rc4   Heinrich Schuchardt
• [PATCH v4 10/14] efi_loader: Disable ANSI output for tests   Heinrich Schuchardt
• [PATCH 00/10] SMBIOS improvements   Heinrich Schuchardt
• [PATCH 00/13] phycore-am62/4: Add more boot sources   Daniel Schultz
• [PATCH 01/13] configs: phycore_am64x_a53_defconfig: Enable CONFIG_OF_BOARD_SETUP   Daniel Schultz
• [PATCH 02/13] include: env: phytec: k3_mmc: Rename variables   Daniel Schultz
• [PATCH 03/13] include: env: phytec: Add raucinit to k3_mmc environment   Daniel Schultz
• [PATCH 04/13] include: net: phytec: Add K3 network boot logic   Daniel Schultz
• [PATCH 05/13] include: env: phytec: Add K3 boot logic for OSPI/QSPI flashes   Daniel Schultz
• [PATCH 06/13] board: phytec: phycore_am62x: Add Network/SPI Boot   Daniel Schultz
• [PATCH 07/13] board: phytec: phycore_am64x: Add Network/SPI Boot   Daniel Schultz
• [PATCH 08/13] configs: phycore_am62x_a53_defconfig: Make BOOTCMD generic   Daniel Schultz
• [PATCH 09/13] configs: phycore_am64x_a53_defconfig: Make BOOTCMD generic   Daniel Schultz
• [PATCH 10/13] configs: phycore_am62x_a53_defconfig: Merge am62x_a53_usbdfu.config   Daniel Schultz
• [PATCH 11/13] configs: Add phycore_am62x_r5_usbdfu_defconfig   Daniel Schultz
• [PATCH 12/13] configs: phycore_am62x_a53_defconfig: Fix CONFIG_ENV_SIZE   Daniel Schultz
• [PATCH 13/13] configs: phycore_am62x_*_defconfig: Set PHYTEC as Manufacturer   Daniel Schultz
• [PATCH v2] doc: document the pwm command   Quentin Schulz
• [PATCH] rockchip: clk: add UART0 clock getter/setter   Quentin Schulz
• [PATCH] rockchip: clk: add UART0 clock getter/setter   Quentin Schulz
• [PATCH v3] doc: document the pwm command   Quentin Schulz
• [PATCH] rockchip: rk3568-nanopi-r5: Disable SPL_DM_WARN Kconfig option   Quentin Schulz
• [PATCH] serial: ns16550: Try get serial clock rate from DT before CLK   Quentin Schulz
• [PATCH] serial: ns16550: Try get serial clock rate from DT before CLK   Quentin Schulz
• [PATCH 0/4] rockchip: Skip serial pinctrl at pre-reloc phase   Quentin Schulz
• [PATCH 1/2] rockchip: px30/rk3326: Use soc dtsi files from dts/upstream   Quentin Schulz
• [PATCH 2/2] rockchip: Use files from dts/upstream   Quentin Schulz
• [PATCH v2 01/14] rockchip: Move the default timer init to a common file   Quentin Schulz
• [PATCH v2 02/14] spl: Correct use of CMD_BOOTI and CMD_BOOTZ   Quentin Schulz
• [PATCH v2 03/14] spl: Remove some #ifdefs in spl_parse_image_header()   Quentin Schulz
• [PATCH v2 04/14] spl: Remove remaining #ifdef in spl_parse_image_header()   Quentin Schulz
• [PATCH v2 05/14] mmc: Use logging instead of printf()   Quentin Schulz
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Quentin Schulz
• [PATCH v2 07/14] log: Avoid including function names by default   Quentin Schulz
• [PATCH v2 08/14] spl: mmc: Drop checks for CONFIG_SPL_LIBCOMMON_SUPPORT   Quentin Schulz
• [PATCH v2 10/14] spl: mmc: Adjust args of spl_mmc_find_device()   Quentin Schulz
• [PATCH v2 11/14] spl: mmc: Try to clean up raw-mode options   Quentin Schulz
• [PATCH v2 12/14] spl: Use unified inline functions for spl_load_info   Quentin Schulz
• [PATCH v2 14/14] blk: Correct comment for blk_get_devnum_by_uclass_idname()   Quentin Schulz
• [PATCH v2 01/10] pinctrl: rockchip: Use syscon_regmap_lookup_by_phandle()   Quentin Schulz
• [PATCH v2 02/10] pinctrl: rockchip: Add a pin_to_bank() helper   Quentin Schulz
• [PATCH v2 04/10] pinctrl: rockchip: Add pinmux status related ops   Quentin Schulz
• [PATCH v2 05/10] pinctrl: rockchip: Add gpio_request_enable() ops   Quentin Schulz
• [PATCH v2 06/10] gpio: rockchip: Get pinctrl device from gpio-ranges prop   Quentin Schulz
• [PATCH v2 07/10] gpio: rockchip: Use pinctrl pin offset to get_gpio_mux()   Quentin Schulz
• [PATCH v2 08/10] gpio: rockchip: Add request() ops   Quentin Schulz
• [PATCH v2 09/10] rockchip: gpio: Add gpio-ranges props   Quentin Schulz
• [PATCH v2 10/10] rockchip: gpio: Add missing gpio aliases   Quentin Schulz
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Quentin Schulz
• [PATCH v2 07/14] log: Avoid including function names by default   Quentin Schulz
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Quentin Schulz
• [PATCH v3 01/15] configs: Resync with savedefconfig   Quentin Schulz
• [PATCH v3 06/15] mmc: Use logging instead of printf()   Quentin Schulz
• [PATCH v3 07/15] mmc: Use logging instead of pr_err()   Quentin Schulz
• [PATCH v3 08/15] log: Avoid including function names by default   Quentin Schulz
• [PATCH v3 12/15] spl: mmc: Try to clean up raw-mode options   Quentin Schulz
• [PATCH 0/4] rockchip: Skip serial pinctrl at pre-reloc phase   Quentin Schulz
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Quentin Schulz
• [PATCH v2] rockchip: px30: clk: add UART0 clock getter/setter   Quentin Schulz
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Quentin Schulz
• [PATCH v2 06/14] mmc: Use logging instead of pr_err()   Quentin Schulz
• clarifying i2c_get_chip_for_busnum()   Quentin Schulz
• clarifying i2c_get_chip_for_busnum()   Quentin Schulz
• clarifying i2c_get_chip_for_busnum()   Quentin Schulz
• [PATCH] treewide: Scrub trailing space   Quentin Schulz
• [PATCH v2 7/8] env: Provide a work-around for unquoting fdtfile   Quentin Schulz
• [PATCH v2 3/8] bootstd: Avoid depending on BLK   Quentin Schulz
• [PATCH] rockchip: add SPI NOR flash support for Radxa E25(CM3I)   Quentin Schulz
• [PATCH] doc/develop/sending_patches.rst: Clarify when to use which branch   Quentin Schulz
• [PATCH] doc/develop/sending_patches.rst: Reword where our git tree is slightly   Quentin Schulz
• [PATCH 2/4] ram: rockchip: Kconfig: Fix dependency of RAM_ROCKCHIP_DEBUG   Quentin Schulz
• [PATCH 3/4] rockchip: Kconfig: PX30: Weaken dependency TPL/SPL serial   Quentin Schulz
• [PATCH 4/4] arm: rockchip: PX30: Fix hard dependency to DEBUG_UART_BOARD_INIT   Quentin Schulz
• xPL terminology   E Shattow
• [PATCH 1/2] bootm: adjust the print format   E Shattow
• [PATCH v4 7/9] dts: starfive: Add JH7110 Cadence USB dts node   E Shattow
• [PATCH 1/1] riscv: define find_{first, next}_zero_bit in asm/bitops.h   E Shattow
• [PATCH v4 8/9] spl: starfive: star64: Setup USB fdt fixup function   E Shattow
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Yasuharu Shibata
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Yasuharu Shibata
• [PATCH 1/2] sandbox: Enable wget command   Yasuharu Shibata
• [PATCH 2/2] sandbox: fix wget test failure after fixing wget issue   Yasuharu Shibata
• [PATCH 07/21] Revert "net: wget: Support retransmission a dropped packet"   Yasuharu Shibata
• [PATCH] i2c: pca954x: Remove pointer to GD   Michal Simek
• [PATCH] i2c: mux: Fix error path in i2c-arb-gpio   Michal Simek
• [PATCH] i2c: mux: Fix error path in i2c-arb-gpio   Michal Simek
• [PATCH 05/14] initcall: Adjust the failure message and return value   Michal Simek
• [PATCH] arm64: zynqmp: Fix pwm-fan polarity   Michal Simek
• [PATCH] arm64: zynqmp: Remove PM firmware checking   Michal Simek
• [PATCH] ARM: zynq: Add support for 7z010_lr and 7z020_lr   Michal Simek
• [PATCH] soc: zynqmp: Add support for zu1eg_lr device   Michal Simek
• [GIT PULL] xilinx patches for v2024.07-rc3   Michal Simek
• [PATCH 05/14] initcall: Adjust the failure message and return value   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: add a fetch utility   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH] cmd: sf: prevent overwriting the reserved memory   Michal Simek
• [PATCH 02/10] sysinfo: Add sysinfo driver and data structure for SMBIOS   Michal Simek
• [PATCH 03/10] smbios: Refactor SMBIOS library   Michal Simek
• [PATCH 04/10] smbios: ignore the non-existence of platform sysinfo detect   Michal Simek
• [PATCH 02/10] sysinfo: Add sysinfo driver and data structure for SMBIOS   Michal Simek
• [PATCH 05/10] armv8: Add arch-specific sysinfo driver   Michal Simek
• [PATCH] test/py/tests/test_bootstage.py: Combine stash/unstash tests   Michal Simek
• [PATCH] test/py: spi: Set the expected error message   Michal Simek
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   Michal Simek
• [PATCH 2/2] arm: dts: rockchip: turn LEDs on at boot for Radxa boards   Dragan Simic
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Dragan Simic
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Dragan Simic
• [PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Christoph Stoidner
• [PATCH v2 0/4] U-Boot support for the Rock 5 ITX   Heiko Stuebner
• [PATCH v2 1/4] arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs   Heiko Stuebner
• [PATCH v2 2/4] arm64: dts: rockchip: add thermal zones information on RK3588   Heiko Stuebner
• [PATCH v2 3/4] arm64: dts: rockchip: add ROCK 5 ITX board   Heiko Stuebner
• [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 5 ITX   Heiko Stuebner
• [PATCH 00/15] Support for rk3568 based QNAP TS433 NAS   Heiko Stuebner
• [PATCH 01/15] DONOTMERGE: arm64: dts: rockchip: add PCIe supply regulator to Qnap-TS433   Heiko Stuebner
• [PATCH 02/15] DONOTMERGE: arm64: dts: rockchip: enable second PCIe controller on the Qnap-TS433   Heiko Stuebner
• [PATCH 03/15] DONOTMERGE: arm64: dts: rockchip: enable uart0 on Qnap-TS433   Heiko Stuebner
• [PATCH 04/15] DONOTMERGE: arm64: dts: rockchip: enable usb ports on Qnap-TS433   Heiko Stuebner
• [PATCH 05/15] DONOTMERGE: arm64: dts: rockchip: add stdout path on Qnap-TS433   Heiko Stuebner
• [PATCH 06/15] DONOTMERGE: arm64: dts: rockchip: enable sata1+2 on Qnap-TS433   Heiko Stuebner
• [PATCH 07/15] DONOTMERGE: arm64: dts: rockchip: add board-aliases for Qnap-TS433   Heiko Stuebner
• [PATCH 08/15] DONOTMERGE: arm64: dts: rockchip: add hdd leds to Qnap-TS433   Heiko Stuebner
• [PATCH 09/15] DONOTMERGE: arm64: dts: rockchip: enable the tsadc on the Qnap-TS433   Heiko Stuebner
• [PATCH 10/15] DONOTMERGE: arm64: dts: rockchip: add gpio-keys to Qnap-TS433   Heiko Stuebner
• [PATCH 11/15] DONOTMERGE: arm64: dts: rockchip: define cpu-supply on the Qnap-TS433   Heiko Stuebner
• [PATCH 12/15] DONOTMERGE: arm64: dts: rockchip: add missing pmic information on Qnap-TS433   Heiko Stuebner
• [PATCH 13/15] DONOTMERGE: arm64: dts: rockchip: enable gpu on Qnap-TS433   Heiko Stuebner
• [PATCH 14/15] DONOTMERGE: arm64: dts: rockchip: add 2 pmu_io_domain supplies for Qnap-TS433   Heiko Stuebner
• [PATCH 15/15] board: rockchip: add support for Qnap TS433 devices   Heiko Stuebner
• [PATCH 4/4] board: rockchip: Add Radxa ROCK 5 ITX   Heiko Stübner
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Sverdlin, Alexander
• [PATCH v3 02/10] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Sverdlin, Alexander
• [PATCH v3 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Sverdlin, Alexander
• [PATCH v3 05/10] dma: ti: k3-udma: Add support for native configuration of chan/flow   Sverdlin, Alexander
• [PATCH v3 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Sverdlin, Alexander
• [PATCH v3 09/10] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Sverdlin, Alexander
• [PATCH 12/35] global_data: Convert have_console into a flag   Sverdlin, Alexander
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Sverdlin, Alexander
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Sverdlin, Alexander
• [PATCH v6 04/11] soc: ti: k3-navss-ringacc: Fix reset ring API   Sverdlin, Alexander
• [PATCH v6 05/11] soc: ti: k3-navss-ringacc: Fix reconfiguration of qmode API   Sverdlin, Alexander
• [PATCH] mtd: spi-nor: Clear Winbond SR3 WPS bit on boot   Jagan Teki
• [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 5 ITX   Philipp Tomsich
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Trimarchi
• [PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Trimarchi
• [PATCH V2] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Trimarchi
• [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Michael Nazzareno Trimarchi
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Michael Nazzareno Trimarchi
• [EXTERNAL] Re: [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Michael Nazzareno Trimarchi
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Nazzareno Trimarchi
• [RFC PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Nazzareno Trimarchi
• [PATCH v5 00/20] Introduce the lwIP network stack   Michael Nazzareno Trimarchi
• [PULL] Pull request for u-boot-nand-20240808   Michael Nazzareno Trimarchi
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Michael Nazzareno Trimarchi
• [PATCH] ubifs: Call ubifs_iput when ubifs_iget is used   Michael Nazzareno Trimarchi
• [PATCH v3 8/9] ubi: implement support for LED activity   Michael Nazzareno Trimarchi
• [PATCH v3 8/9] ubi: implement support for LED activity   Michael Nazzareno Trimarchi
• Uboot net phy.c query   Michael Nazzareno Trimarchi
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Michael Nazzareno Trimarchi
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Michael Nazzareno Trimarchi
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Michael Nazzareno Trimarchi
• [PATCH v2 1/3] mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag   Michael Nazzareno Trimarchi
• [PATCH v2 2/3] mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()'   Michael Nazzareno Trimarchi
• [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Michael Nazzareno Trimarchi
• [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Michael Nazzareno Trimarchi
• xPL terminology   Michael Nazzareno Trimarchi
• [PATCH] mtd: nand: raw: omap_gpmc: Check return value of gpmc_nand_init   Michael Nazzareno Trimarchi
• [PATCH] mtd: nand: raw: atmel: remove unnecessary return value   Michael Nazzareno Trimarchi
• [PATCH] gpio: Add G7 Aspeed gpio controller driver   Billy Tsai
• [RFC PATCH 0/2] Add TI K3 PCIe Controller support for J7200   Siddharth Vadapalli
• [RFC PATCH 1/2] pci: Add TI K3 Cadence PCIe Controller   Siddharth Vadapalli
• [RFC PATCH 2/2] configs: j7200_evm_a72_defconfig: Enable configs for PCI support   Siddharth Vadapalli
• [RFC PATCH 1/2] pci: Add TI K3 Cadence PCIe Controller   Siddharth Vadapalli
• [PATCH v4 00/10] Add support for Ethernet Boot on SK-AM62   Chintan Vankar
• [PATCH v4 01/10] common: spl: spl: Init DRAM size in R5/A53 SPL   Chintan Vankar
• [PATCH v4 02/10] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Chintan Vankar
• [PATCH v4 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Chintan Vankar
• [PATCH v4 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v4 05/10] dma: ti: k3-udma: Add support for native configuration of chan/flow   Chintan Vankar
• [PATCH v4 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH v4 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
• [PATCH v4 08/10] configs: am62: Enable configs required for Ethboot   Chintan Vankar
• [PATCH v4 09/10] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Chintan Vankar
• [PATCH v4 10/10] dts: upstream: src: arm64: ti: k3-am62x-sk-common: Sync DT with Linux v6.11-rc3   Chintan Vankar
• [PATCH v4 10/10] dts: upstream: src: arm64: ti: k3-am62x-sk-common: Sync DT with Linux v6.11-rc3   Chintan Vankar
• [PATCH v5 00/10] Add support for Ethernet Boot on SK-AM62   Chintan Vankar
• [PATCH v5 01/10] common: spl: spl: Init DRAM size in R5/A53 SPL   Chintan Vankar
• [PATCH v5 02/10] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Chintan Vankar
• [PATCH v5 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Chintan Vankar
• [PATCH v5 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v5 05/10] dma: ti: k3-udma: Add support for native configuration of chan/flow   Chintan Vankar
• [PATCH v5 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH v5 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
• [PATCH v5 08/10] configs: am62: Enable configs required for Ethboot   Chintan Vankar
• [PATCH v5 09/10] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Chintan Vankar
• [PATCH v5 10/10] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node   Chintan Vankar
• [PATCH v5 10/10] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node   Chintan Vankar
• [PATCH v5 08/10] configs: am62: Enable configs required for Ethboot   Chintan Vankar
• [PATCH v4 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v6 00/11] Add support for Ethernet Boot on SK-AM62   Chintan Vankar
• [PATCH v6 01/11] common: spl: spl: Init DRAM size in R5/A53 SPL   Chintan Vankar
• [PATCH v6 02/11] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Chintan Vankar
• [PATCH v6 03/11] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Chintan Vankar
• [PATCH v6 04/11] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v6 05/11] soc: ti: k3-navss-ringacc: Fix reconfiguration of qmode API   Chintan Vankar
• [PATCH v6 06/11] dma: ti: k3-udma: Add support for native configuration of chan/flow   Chintan Vankar
• [PATCH v6 07/11] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH v6 08/11] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
• [PATCH v6 09/11] configs: am62: Enable configs required for Ethboot   Chintan Vankar
• [PATCH v6 10/11] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Chintan Vankar
• [PATCH v6 11/11] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in phy_gmii_sel node   Chintan Vankar
• [PATCH 0/2] Add and enable mcore support   Yashwanth Varakala
• [PATCH 1/2] board: phytec: phycore_imx8mp: Add mcore support   Yashwanth Varakala
• [PATCH 2/2] configs: phycore-imx8mp_defconfig: Enabled bootaux command   Yashwanth Varakala
• [PATCH 1/4] power: regulator: Trigger probe of regulators which are always-on or boot-on   Marek Vasut
• [PATCH 07/11] board: novena: convert to DM_I2C   Marek Vasut
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v2] usb: dwc3: support USB 3.1 controllers   Marek Vasut
• [PATCH] treewide: Scrub trailing space   Marek Vasut
• [PATCH] usb: gadget: ux500: Do not redefine ops if CONFIG_USB_MUSB_HOST set   Marek Vasut
• [PATCH 2/2] net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbol   Marek Vasut
• [PATCH v3 0/7] FUSB302 USB-C controller support   Marek Vasut
• [PATCH v4 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing   Marek Vasut
• usb: ehci: Fix db410c usb reset not working   Marek Vasut
• [PATCH v3 0/7] FUSB302 USB-C controller support   Marek Vasut
• [PATCH 1/4] power: regulator: Trigger probe of regulators which are always-on or boot-on   Marek Vasut
• [PATCH v3 0/7] FUSB302 USB-C controller support   Marek Vasut
• [PATCH] usb: gadget: ether: Handle gadget driver registration in start and stop   Marek Vasut
• [PATCH] ARM: imx: Use USB SDPS as fallback option on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH] ARM: imx: Enable cat and xxd commands on Data Modul i.MX8M Mini/Plus eDM SBC   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH] mtd: spi-nor: Clear Winbond SR3 WPS bit on boot   Marek Vasut
• [PATCH 1/6] usb: gadget: Inline usb_add_gadget_udc_release   Marek Vasut
• [PATCH 2/6] usb: gadget: Drop usb_udc_release()   Marek Vasut
• [PATCH 3/6] usb: gadget: Track driver data as part of struct usb_gadget   Marek Vasut
• [PATCH 4/6] usb: gadget: Drop dev_to_usb_gadget()   Marek Vasut
• [PATCH 5/6] usb: gadget: dwc2: Drop get/set_udc_gadget_private_data()   Marek Vasut
• [PATCH 6/6] usb: gadget: Pass struct udevice to usb_add_gadget_udc()   Marek Vasut
• [PATCH 1/1] usb: gadget: ether: Disable USB pullup in eth probe   Marek Vasut
• [PATCH 1/3] imx: Remove CFG_MXC_USB_FLAGS   Marek Vasut
• [PATCH 2/3] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Marek Vasut
• [PATCH 3/3] imx: Remove CFG_MXC_USB_PORTSC   Marek Vasut
• xPL terminology   Marek Vasut
• [PATCH] ARM: imx: Enable MMU and dcache very early on i.MX8M   Marek Vasut
• [PATCH] ARM: imx: Make PLL settings configurable at board level   Marek Vasut
• [PATCH 13/18] mmc: Add more debugging for SPL   Marek Vasut
• [PATCH v2] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Marek Vasut
• [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Marek Vasut
• [PATCH v4] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Marek Vasut
• [PATCH v4] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Marek Vasut
• [PATCH] mmc: Hide mmc speed command under mmc command   Marek Vasut
• [PATCH] ARM: imx: Wrap i.MX config options in HAVE_IMX   Marek Vasut
• [PATCH] ARM: imx: Wrap i.MX config options in HAVE_IMX   Marek Vasut
• [PATCH v4 1/9] usb: cdns3: Set USB PHY mode in cdns3_drd_update_mode()   Marek Vasut
• [PATCH v4 2/9] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver   Marek Vasut
• [PATCH v4 3/9] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Marek Vasut
• [PATCH v4 4/9] usb: cdns: starfive: Add cdns USB driver   Marek Vasut
• [PATCH v4 0/6] FUSB302 USB-C controller support   Marek Vasut
• [PATCH v3 2/4] usb: ehci-mx5: Add a default for CFG_MXC_USB_PORTSC   Marek Vasut
• [PATCH v3 3/4] mx5: Remove CFG_MXC_USB_PORT   Marek Vasut
• [PATCH v3 4/4] imx: Remove CFG_MXC_USB_PORTSC   Marek Vasut
• [PATCH] mtd: rpc: renesas: Add R-Car Gen4 DT compatible   Marek Vasut
• [PATCH 1/5] mtd: spi: renesas: Write DREAR register once   Marek Vasut
• [PATCH 2/5] mtd: spi: renesas: Write DRDMCR register once   Marek Vasut
• [PATCH 3/5] mtd: spi: renesas: Configure DRDRENR register   Marek Vasut
• [PATCH 4/5] mtd: spi: renesas: Configure RPC PHY timing registers   Marek Vasut
• [PATCH 5/5] mtd: spi: renesas: Add R-Car Gen4 DT compatible   Marek Vasut
• [PATCH] ARM: dts: renesas: Minimize R8A779G0 V4H RPC SPI DT node   Marek Vasut
• [PATCH 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   David Virag
• [PATCH v2 0/2] Enable Samsung I2C drivers on newer platforms   David Virag
• [PATCH v2 1/2] i2c: samsung: Drop s3c24x0 specific code.   David Virag
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   David Virag
• [PATCH v2 2/2] i2c: samsung: Support platforms other than EXYNOS4 and EXYNOS5   David Virag
• [PATCH 6/6] usb: gadget: Pass struct udevice to usb_add_gadget_udc()   Linus Walleij
• [PATCH 0/8] riscv: Add AST2700 platform support   Chia-Wei Wang
• [PATCH 1/8] riscv: Make A ISA extension selectable   Chia-Wei Wang
• [PATCH 2/8] riscv: Make stack size shift configurable   Chia-Wei Wang
• [PATCH 3/8] riscv: u-boot-spl.lds: Remove _image_binary_end alignment   Chia-Wei Wang
• [PATCH 4/8] riscv: Add AST2700 SoC initial platform support   Chia-Wei Wang
• [PATCH 5/8] timer: Add AST2700 IBEX timer support   Chia-Wei Wang
• [PATCH 6/8] board: ibex_ast2700: Add FMC header support   Chia-Wei Wang
• [PATCH 7/8] ram: ast2700: Add DRAM controller initialization   Chia-Wei Wang
• [PATCH 8/8] configs: ibex-ast2700: Enable DRAM and timer driver   Chia-Wei Wang
• [PATCH] drivers/crypto: aspeed: Add Caliptra SHA ACC support   Chia-Wei Wang
• [PATCH v9 36/37] [TESTING] configs: set CONFIG_NET=y for FTGMAC100   ChiaWei Wang
• [PATCH] android_ab: Fix backup offset calculation   Joshua Watt
• [PATCH v2] android_ab: Fixes: Fix backup offset calculation   Joshua Watt
• [PATCH v3] gpio: mxc_gpio: fix reading state of GPIO pins in output mode   Lothar Waßmann
• [PATCH v2] bootstage: Fix out-of-bounds read in reloc_bootstage()   Richard Weinberger
• [PATCH 1/3] test_fs: Allow running unprivileged   Richard Weinberger
• [PATCH 2/3] test_fs: Rename mount dir to scratch   Richard Weinberger
• [PATCH 3/3] test_ut: Allow running unprivileged   Richard Weinberger
• [PATCH 1/4] x86: Fix ptrdiff_t for x86_64   Richard Weinberger
• [PATCH 2/4] dlmalloc: Fix integer overflow in request2size()   Richard Weinberger
• [PATCH 3/4] dlmalloc: Fix integer overflow in sbrk()   Richard Weinberger
• [PATCH 4/4] dlmalloc: Make sure allocation size is within malloc area   Richard Weinberger
• [PATCH v2 1/4] squashfs: Fix integer overflow in sqfs_resolve_symlink()   Richard Weinberger
• [PATCH v2 2/4] squashfs: Fix integer overflow in sqfs_inode_size()   Richard Weinberger
• [PATCH v2 3/4] squashfs: Check sqfs_find_inode() return value   Richard Weinberger
• [PATCH v2 4/4] squashfs: Fix stack overflow while symlink resolving   Richard Weinberger
• [PATCH] squashfs: Fix heap corruption in sqfs_search_dir()   Richard Weinberger
• [PATCH 2/3] test_fs: Rename mount dir to scratch   Richard Weinberger
• [PATCH v2 1/3] ext4: Fix integer overflow in ext4fs_read_symlink()   Richard Weinberger
• [PATCH v2 2/3] compiler: Ensure __builtin_*_overflow() support   Richard Weinberger
• [PATCH v2 3/3] ext4: Fix zalloc()   Richard Weinberger
• [PATCH v2 1/3] ext4: Fix integer overflow in ext4fs_read_symlink()   Richard Weinberger
• [PATCH 1/3] test_fs: Allow running unprivileged   Richard Weinberger
• [PATCH 1/3] test_fs: Allow running unprivileged   Richard Weinberger
• [PATCH 1/3] test_fs: Allow running unprivileged   Richard Weinberger
• [PATCH] omap3: omap3evm: Migrate to OF_UPSTREAM   Derald D. Woods
• Aw: [PATCH 5/5] clk: mediatek: mt7623: remap peri clock ID and add MUX   Frank Wunderlich
• Aw: [PATCH 8/8] clk: mediatek: mt7622: add missing A1/2SYS clock ID   Frank Wunderlich
• Aw: [PATCH 15/15] clk: mediatek: mt7986: rename CK to CLK   Frank Wunderlich
• Aw: [PATCH 13/13] clk: mediatek: mt7988: rename CK to CLK   Frank Wunderlich
• [PATCH 0/1] Add support for Cool Pi GenBook   Andy Yan
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Andy Yan
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Andy Yan
• [PATCH 1/1] board: rockchip: Add support for rk3588 GenBook   Andy Yan
• [PATCH] mmc: rockchip_dw_mmc: Allow 4-bit mode when 8-bit mode is supported   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add Radxa ROCK S0   Kever Yang
• [PATCH 2/2] board: rockchip: Add Radxa ROCK S0   Kever Yang
• [PATCH 1/8] arm64: dts: rockchip: Add rk3308 IO voltage domains   Kever Yang
• [PATCH 2/8] arm64: dts: rockchip: Add sdmmc related properties on rk3308-rock-pi-s   Kever Yang
• [PATCH 3/8] arm64: dts: rockchip: Add pinctrl for UART0 to rk3308-rock-pi-s   Kever Yang
• [PATCH 4/8] arm64: dts: rockchip: Add mdio and ethernet-phy nodes to rk3308-rock-pi-s   Kever Yang
• [PATCH 5/8] arm64: dts: rockchip: Add io-domains to rk3308-rock-pi-s   Kever Yang
• [PATCH 6/8] arm64: dts: rockchip: Update WIFi/BT related nodes on rk3308-rock-pi-s   Kever Yang
• [PATCH 7/8] rockchip: rk3308-rock-pi-s: Remove unnecessary u-boot dtsi overrides   Kever Yang
• [PATCH 8/8] rockchip: rk3308-rock-pi-s: Enable LED and IO Domain driver   Kever Yang
• [PATCH 1/4] arm64: dts: rockchip: Prepare RK3588 SoC dtsi files for per-variant OPPs   Kever Yang
• [PATCH 2/4] arm64: dts: rockchip: add thermal zones information on RK3588   Kever Yang
• [PATCH 3/4] arm64: dts: rockchip: add ROCK 5 ITX board   Kever Yang
• [PATCH 4/4] board: rockchip: Add Radxa ROCK 5 ITX   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add FriendlyElec CM3588 NAS board   Kever Yang
• [PATCH 2/2] board: rockchip: Add FriendlyElec CM3588 NAS   Kever Yang
• [PATCH] rockchip: configs: puma-rk3399: disable VIDEO support that breaks Linux   Kever Yang
• [PATCH v2 1/2] rockchip: rk3308: Remove OTP device node from soc u-boot dtsi   Kever Yang
• [PATCH v2 2/2] arm64: dts: rockchip: Add OTP device node for RK3308   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add Radxa ROCK 3B   Kever Yang
• [PATCH 2/2] board: rockchip: Add Radxa ROCK 3B   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add Xunlong Orange Pi 3B   Kever Yang
• [PATCH 2/2] board: rockchip: Add Xunlong Orange Pi 3B   Kever Yang
• [PATCH] arm: dts: rockchip: disable "usb_host0_ohci" to make boot faster for Radxa ROCK 3A   Kever Yang
• [PATCH] arm: dts: rockchip: fix dts for Radxa ROCK 4C+   Kever Yang
• [PATCH] arm: dts: rockchip: remove upstreamed props for Radxa ROCK 3A   Kever Yang
• [PATCH] arm: dts: rockchip: remove upstreamed props for Radxa ROCK 5B   Kever Yang
• [PATCH v3 3/7] board: rock5b-rk3588: add USB-C controller support   Kever Yang
• [PATCH v3 5/7] rockchip: rk3588-rock-5b: Add USB-C controller to u-boot.dtsi   Kever Yang
• [PATCH v3 6/7] rockchip: rock5b-rk3588: Enable USB-C PD support   Kever Yang
• [PATCH v3 4/7] board: rock5b-rk3588: enable USB-C in operating system   Kever Yang
• [PATCH v2 4/4] board: rockchip: Add Radxa ROCK 5 ITX   Kever Yang
• [PATCH v2 1/5] arm64: dts: rockchip: Add Radxa ZERO 3W/3E   Kever Yang
• [PATCH v2 2/5] arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W   Kever Yang
• [PATCH v2 3/5] arm64: dts: rockchip: add gpio-line-names to radxa-zero-3   Kever Yang
• [PATCH v2 4/5] dm: adc: Add SPL_ADC Kconfig symbol for use of ADC in SPL   Kever Yang
• [PATCH v2 5/5] board: rockchip: Add Radxa ZERO 3W/3E   Kever Yang
• [PATCH v2 02/10] pinctrl: rockchip: Add a pin_to_bank() helper   Kever Yang
• [PATCH v2 05/10] pinctrl: rockchip: Add gpio_request_enable() ops   Kever Yang
• [PATCH v2 08/10] gpio: rockchip: Add request() ops   Kever Yang
• [PATCH v2 09/10] rockchip: gpio: Add gpio-ranges props   Kever Yang
• [PATCH v2 10/10] rockchip: gpio: Add missing gpio aliases   Kever Yang
• [PATCH] rockchip: rk3568-nanopi-r5: Disable SPL_DM_WARN Kconfig option   Kever Yang
• [PATCH v6] board: rockchip: add Radxa ROCK 3 Model C   Kever Yang
• [PATCH] arm64: dts: rockchip: change spi-max-frequency for Radxa ROCK 3C   Kever Yang
• [PATCH] configs: rockchip: enable "ums" command for Radxa ROCK 5B   Kever Yang
• [PATCH v2 00/10] rockchip: pinctrl: Add support for pinmux status cmd   Kever Yang
• Pull request: u-boot-rockchip-20240812   Kever Yang
• Grub doesn’t load devicetree   Tomaž Zaman
• Re: Grub doesn’t load devicetree   Tomaž Zaman
• Re: Grub doesn’t load devicetree   Tomaž Zaman
• Re: Grub doesn’t load devicetree   Tomaž Zaman
• Re: Grub doesn’t load devicetree   Tomaž Zaman
• Re: Grub doesn’t load devicetree   Tomaž Zaman
• [PATCH 1/8] net: dc2114x: add support for platforms that don't have pci controllers   Hanyuan Zhao
• [PATCH 2/8] net: dc2114x: get mac address from environment   Hanyuan Zhao
• [PATCH 3/8] net: dc2114x: set the card number to start at zero   Hanyuan Zhao
• [PATCH 4/8] net: dc2114x: add support for CPUs that have cache between the memory and the card   Hanyuan Zhao
• [PATCH 5/8] net: dc2114x: remove unused lines and change the var and print types   Hanyuan Zhao
• [PATCH 6/8] net: dc2114x: allow users to decide whether to detect the tx No Carrier errors   Hanyuan Zhao
• [PATCH 7/8] net: dc2114x: allow users to decide how to tx packets according to IP core   Hanyuan Zhao
• [PATCH 8/8] net: dc2114x: remove the pass all multicast flag in operation mode settings   Hanyuan Zhao
• Fw: ECDSA for FIT Files in U-Boot   eden.hamilton at bt.com
• Fw: ECDSA for FIT Files in U-Boot   eden.hamilton at bt.com
• Verified Boot through U-Boot for RPi3 with OP-TEE   thomas.gymer at bt.com
• Verified Boot through U-Boot for RPi3 with OP-TEE   thomas.gymer at bt.com
• [PATCH v3 1/3] i2c: imx_lpi2c: Fix a typo in bus_i2c_receive   fedorross at gmail.com
• [PATCH v3 2/3] i2c: imx_lpi2c: Replace hard-coded bus speed value with bus->speed_hz   fedorross at gmail.com
• [PATCH v3 3/3] i2c: imx_lpi2c: Support read transfers longer than 256 bytes   fedorross at gmail.com
• [PATCH] imx: imx8: fix build when CONFIG_IMX_BOOTAUX is set   max.oss.09 at gmail.com
• [PATCH v1 0/4] apalis/colibri imx8: enable additional features   max.oss.09 at gmail.com
• [PATCH v1 1/4] board: apalis-imx8: add reset code   max.oss.09 at gmail.com
• [PATCH v1 2/4] apalis-imx8: enable i.MX specific BOOTAUX   max.oss.09 at gmail.com
• [PATCH v1 3/4] colibri-imx8x: enable i.MX specific BOOTAUX   max.oss.09 at gmail.com
• [PATCH v1 4/4] colibri-imx8x: enable i.MX specific SNVS configuration   max.oss.09 at gmail.com
• [PATCH 0/4] mtd: spi-nor: add generic flash driver   tkuw584924 at gmail.com
• [PATCH 1/4] mtd: spi-nor: Rework set_4byte()   tkuw584924 at gmail.com
• [PATCH 2/4] mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data   tkuw584924 at gmail.com
• [PATCH 3/4] mtd: spi-nor: Remove SPI_NOR_SKIP_SFDP flag   tkuw584924 at gmail.com
• [PATCH 4/4] mtd: spi-nor: add generic flash driver   tkuw584924 at gmail.com
• [PATCH] mtd: spi-nor-ids: Add NO_CHIP_ERASE flag to Infineon 2Gb parts   tkuw584924 at gmail.com
• [PATCH] mtd: spi-nor-ids: Add support for S28HS256T   tkuw584924 at gmail.com
• [PATCH] spl: fix error handling of spl_fit_read   mailinglist1 at johanneskirchmair.de
• [PATCH] usb: add reset pin handling to onboard-hub driver   mailinglist1 at johanneskirchmair.de
• AW: [PATCH] spl: fix error handling of spl_fit_read   mailinglist1 at johanneskirchmair.de
• [PATCH] doc/develop/sending_patches.rst: Reword where our git tree is slightly   neil.armstrong at linaro.org
• [PATCH v5 08/20] test: Introduce the concept of a role   neil.armstrong at linaro.org
• [PATCH v5 01/20] test: Allow signaling that U-Boot is ready   neil.armstrong at linaro.org
• [PATCH v5 03/20] test: Pass stderr to stdout   neil.armstrong at linaro.org
• [PATCH v5 17/20] test: Try to shut down the lab console gracefully   neil.armstrong at linaro.org
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   neil.armstrong at linaro.org
• [u-boot-test-hooks PATCH v4 3/3] Provide some basic scripts for Labgrid integration   neil.armstrong at linaro.org
• u-boot does not detect and correct bitflip when loading kernel from NAND   jackie at liwest.at
• [PATCH v1 2/3] riscv: cache: Add CBO instructions   Conor.Dooley at microchip.com
• [PATCH v1] lib: elf: Fix bootelf -p crash issue   JianfengA.Zhu at sony.com
• usb: ehci: Fix db410c usb reset not working   JianfengA.Zhu at sony.com
• 回复: usb: ehci: Fix db410c usb reset not working   JianfengA.Zhu at sony.com
• phy: Fix db410c crash issue during usb_stop   JianfengA.Zhu at sony.com
• [RFC PATCH 0/1] env: introduce variable value ranges   lukas.funke-oss at weidmueller.com
• [RFC PATCH 1/1] env: introduce variable ranges   lukas.funke-oss at weidmueller.com
• Uboot net phy.c query   黄云辉
• I think I found a typographical error   김태현