[PATCH v4 10/10] dts: upstream: src: arm64: ti: k3-am62x-sk-common: Sync DT with Linux v6.11-rc3

[Chintan Vankar]

Sync Device tree nodes with Linux v6.11-rc3.

[ upstream commit: ba50141137fae205a731005e70687f4a52289050 ]

Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---

Link to v3:
- This link is for the patch which was equivalent to this patch, from
  this version the node is moved to DT file equivalent to Linux as a
  part of DT sync.
  https://lore.kernel.org/r/20240705045030.1141934-11-c-vankar@ti.com/

Changes from v3 to v4:
- Updated this patch by syncing "k3-am62x-sk-common.dtsi" file
  with Linux v6.11-rc3 compared to previous version.

 .../src/arm64/ti/k3-am62x-sk-common.dtsi      | 32 ++++++++++---------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi b/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
index 3c45782ab2..44ff67b6bf 100644
--- a/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
+++ b/dts/upstream/src/arm64/ti/k3-am62x-sk-common.dtsi
@@ -48,6 +48,14 @@
 			pmsg-size = <0x8000>;
 		};
 
+		/* global cma region */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00 0x8000000>;
+			linux,cma-default;
+		};
+
 		secure_tfa_ddr: tfa at 9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -128,6 +136,10 @@
 	};
 };
 
+&phy_gmii_sel {
+	bootph-all;
+};
+
 &main_pmx0 {
 	/* First pad number is ALW package and second is AMC package */
 	main_uart0_pins_default: main-uart0-default-pins {
@@ -156,6 +168,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
 			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
@@ -335,15 +348,9 @@
 			self-powered;
 			data-role = "dual";
 			power-role = "sink";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					usb_con_hs: endpoint {
-						remote-endpoint = <&usb0_hs_ep>;
-					};
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
 				};
 			};
 		};
@@ -470,12 +477,9 @@
 
 &usb0 {
 	bootph-all;
-	#address-cells = <1>;
-	#size-cells = <0>;
 	usb-role-switch;
 
-	port at 0 {
-		reg = <0>;
+	port {
 		usb0_hs_ep: endpoint {
 		    remote-endpoint = <&usb_con_hs>;
 	       };
@@ -504,8 +508,6 @@
 	       0 0 0 0
 	       0 0 0 0
 	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
 };
 
 &dss {
-- 
2.34.1