[PATCH v2 08/11] board: vining_2000: convert to DM_I2C

[Anatolij Gustschin]

Conversion to DM_I2C is mandatory, enable DM_I2C
to disable board removal warning.

Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
Cc: Silvio Fricke <open-source at softing.de>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Heiko Schocher <hs at denx.de>
Cc: Tom Rini <trini at konsulko.com>
---
Changes in v2:
  do not remove CONFIG_SYS_I2C_MXC_I2C* to fix build warnings/errors

 board/softing/vining_2000/vining_2000.c | 25 -------------------------
 configs/vining_2000_defconfig           |  2 +-
 2 files changed, 1 insertion(+), 26 deletions(-)

diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c
index a0dbf97524..bd430cfaa7 100644
--- a/board/softing/vining_2000/vining_2000.c
+++ b/board/softing/vining_2000/vining_2000.c
@@ -18,7 +18,6 @@
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/io.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/sections.h>
 #include <env.h>
 #include <linux/bitops.h>
@@ -27,7 +26,6 @@
 #include <config.h>
 #include <fsl_esdhc_imx.h>
 #include <mmc.h>
-#include <i2c.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <power/pmic.h>
@@ -53,10 +51,6 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_HIGH |		\
 	PAD_CTL_SRE_FAST)
 
-#define I2C_PAD_CTRL  (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP |	\
-	PAD_CTL_PKE | PAD_CTL_ODE | PAD_CTL_SPEED_MED |		\
-	PAD_CTL_DSE_40ohm)
-
 #define USDHC_CLK_PAD_CTRL  (PAD_CTL_HYS | PAD_CTL_SPEED_MED |	\
 	PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST)
 
@@ -120,21 +114,6 @@ eth_fail:
 	return ret;
 }
 
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-static struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC,
-		.gp = IMX_GPIO_NR(1, 0),
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC,
-		.gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC,
-		.gp = IMX_GPIO_NR(1, 1),
-	},
-};
-
 static struct pmic *pfuze_init(unsigned char i2cbus)
 {
 	struct pmic *p;
@@ -400,10 +379,6 @@ int board_init(void)
 	/* Address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-#ifdef CONFIG_SYS_I2C_MXC
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-#endif
-
 	return board_net_init();
 }
 
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index c39597cdf5..e5c9c2861e 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -70,7 +70,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FEC"
 CONFIG_BOUNCE_BUFFER=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_SUPPORT_EMMC_RPMB=y
-- 
2.25.1