[PATCH v3 07/15] mmc: Use logging instead of pr_err()
Simon Glass
sjg at chromium.org
Sun Aug 11 14:29:16 CEST 2024
Use the log subsystem instead of dev, to avoid including function names
in the code.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Sean Anderson <seanga2 at gmail.com>
---
Changes in v3:
- Fix 'enver' typo while we are here
- Put enhanced size back to decimal
- Drop unnecessary braces around 'Card did not respond' message
drivers/mmc/mmc.c | 46 +++++++++++++++++++++++-----------------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index cf8277cbed8..9644aa7aa43 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -294,7 +294,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
if (status & MMC_STATUS_MASK) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- pr_err("Status Error: 0x%08x\n", status);
+ log_err("Status Error: %#08x\n", status);
#endif
return -ECOMM;
}
@@ -307,7 +307,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
if (timeout_ms <= 0) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- pr_err("Timeout waiting card ready\n");
+ log_err("Timeout waiting card ready\n");
#endif
return -ETIMEDOUT;
}
@@ -449,7 +449,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
if (blkcnt > 1) {
if (mmc_send_stop_transmission(mmc, false)) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- pr_err("mmc fail to send stop cmd\n");
+ log_err("mmc fail to send stop cmd\n");
#endif
return 0;
}
@@ -500,8 +500,8 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
if ((start + blkcnt) > block_dev->lba) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
- start + blkcnt, block_dev->lba);
+ log_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+ start + blkcnt, block_dev->lba);
#endif
return 0;
}
@@ -996,7 +996,7 @@ static int mmc_get_capabilities(struct mmc *mmc)
return 0;
if (!ext_csd) {
- pr_err("No ext_csd found!\n"); /* this should enver happen */
+ log_err("No ext_csd found!\n"); /* this should never happen */
return -ENOTSUPP;
}
@@ -1108,17 +1108,17 @@ int mmc_hwpart_config(struct mmc *mmc,
return -EINVAL;
if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
- pr_err("eMMC >= 4.4 required for enhanced user data area\n");
+ log_err("eMMC >= 4.4 required for enhanced user data area\n");
return -EMEDIUMTYPE;
}
if (!(mmc->part_support & PART_SUPPORT)) {
- pr_err("Card does not support partitioning\n");
+ log_err("Card does not support partitioning\n");
return -EMEDIUMTYPE;
}
if (!mmc->hc_wp_grp_size) {
- pr_err("Card does not define HC WP group size\n");
+ log_err("Card does not define HC WP group size\n");
return -EMEDIUMTYPE;
}
@@ -1126,8 +1126,7 @@ int mmc_hwpart_config(struct mmc *mmc,
if (conf->user.enh_size) {
if (conf->user.enh_size % mmc->hc_wp_grp_size ||
conf->user.enh_start % mmc->hc_wp_grp_size) {
- pr_err("User data enhanced area not HC WP group "
- "size aligned\n");
+ log_err("User data enhanced area not HC WP group size aligned\n");
return -EINVAL;
}
part_attrs |= EXT_CSD_ENH_USR;
@@ -1145,8 +1144,8 @@ int mmc_hwpart_config(struct mmc *mmc,
for (pidx = 0; pidx < 4; pidx++) {
if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
- pr_err("GP%i partition not HC WP group size "
- "aligned\n", pidx+1);
+ log_err("GP%i partition not HC WP group-size aligned\n",
+ pidx + 1);
return -EINVAL;
}
gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
@@ -1157,7 +1156,7 @@ int mmc_hwpart_config(struct mmc *mmc,
}
if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
- pr_err("Card does not support enhanced attribute\n");
+ log_err("Card does not support enhanced attribute\n");
return -EMEDIUMTYPE;
}
@@ -1170,8 +1169,8 @@ int mmc_hwpart_config(struct mmc *mmc,
(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
if (tot_enh_size_mult > max_enh_size_mult) {
- pr_err("Total enhanced size exceeds maximum (%u > %u)\n",
- tot_enh_size_mult, max_enh_size_mult);
+ log_err("Total enhanced size exceeds maximum (%#x > %#x)\n",
+ tot_enh_size_mult, max_enh_size_mult);
return -EMEDIUMTYPE;
}
@@ -1204,7 +1203,7 @@ int mmc_hwpart_config(struct mmc *mmc,
if (ext_csd[EXT_CSD_PARTITION_SETTING] &
EXT_CSD_PARTITION_SETTING_COMPLETED) {
- pr_err("Card already partitioned\n");
+ log_err("Card already partitioned\n");
return -EPERM;
}
@@ -1875,7 +1874,7 @@ error:
}
}
- pr_err("unable to select a mode\n");
+ log_err("unable to select a mode\n");
return -ENOTSUPP;
}
@@ -2253,7 +2252,7 @@ error:
}
}
- pr_err("unable to select a mode : %d\n", err);
+ log_err("unable to select a mode: %d\n", err);
return -ENOTSUPP;
}
@@ -2921,7 +2920,8 @@ retry:
if (err) {
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
if (!quiet)
- pr_err("Card did not respond to voltage select! : %d\n", err);
+ log_err("Card did not respond to voltage select! : %d\n",
+ err);
#endif
return -EOPNOTSUPP;
}
@@ -2954,7 +2954,7 @@ int mmc_start_init(struct mmc *mmc)
| MMC_CAP(MMC_LEGACY) |
MMC_MODE_1BIT);
} else {
- pr_err("bus_mode requested is not supported\n");
+ log_err("bus_mode requested is not supported\n");
return -EINVAL;
}
}
@@ -2974,7 +2974,7 @@ int mmc_start_init(struct mmc *mmc)
if (no_card) {
mmc->has_init = 0;
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
- pr_err("MMC: no card present\n");
+ log_err("MMC: no card present\n");
#endif
return -ENOMEDIUM;
}
@@ -3103,7 +3103,7 @@ static int mmc_probe(struct bd_info *bis)
uclass_foreach_dev(dev, uc) {
ret = device_probe(dev);
if (ret)
- pr_err("%s - probe failed: %d\n", dev->name, ret);
+ log_err("%s - probe failed: %d\n", dev->name, ret);
}
return 0;
--
2.34.1
More information about the U-Boot
mailing list