[PATCH] board/qualcomm: add debug config fragments for some SoCs

[Caleb Connolly]

We already have some documentation describing how to enable debug UART
for Qualcomm SoCs. However the UART address varies per-soc... Add some
config fragments to enable debug UART for few well supported SoCs.

These can be used like:

$ make qcom_defconfig debug-sdm845.config

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 board/qualcomm/debug-sdm845.config | 5 +++++
 board/qualcomm/debug-sm6115.config | 5 +++++
 board/qualcomm/debug-sm8250.config | 5 +++++
 3 files changed, 15 insertions(+)
 create mode 100644 board/qualcomm/debug-sdm845.config
 create mode 100644 board/qualcomm/debug-sm6115.config
 create mode 100644 board/qualcomm/debug-sm8250.config

diff --git a/board/qualcomm/debug-sdm845.config b/board/qualcomm/debug-sdm845.config
new file mode 100644
index 000000000000..31ad6d02a3a7
--- /dev/null
+++ b/board/qualcomm/debug-sdm845.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xa84000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=7372800
diff --git a/board/qualcomm/debug-sm6115.config b/board/qualcomm/debug-sm6115.config
new file mode 100644
index 000000000000..131c6e230de8
--- /dev/null
+++ b/board/qualcomm/debug-sm6115.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0x4a90000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600
diff --git a/board/qualcomm/debug-sm8250.config b/board/qualcomm/debug-sm8250.config
new file mode 100644
index 000000000000..4d3cc4cc97f4
--- /dev/null
+++ b/board/qualcomm/debug-sm8250.config
@@ -0,0 +1,5 @@
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_BASE=0xa90000
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_CLOCK=14745600
-- 
2.46.0