[PATCH 1/2] configs: phycore-imx8mp_defconfig: Enable SPI NOR flash support
Benjamin Hahn
B.Hahn at phytec.de
Mon Aug 26 18:49:05 CEST 2024
Enable SPI NOR flash support in U-Boot.
Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
configs/phycore-imx8mp_defconfig | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 63f8a80ba994..7f6e6c67bfd2 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -6,8 +6,10 @@ CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_PHYTEC_SOM_DETECTION=y
+CONFIG_SF_DEFAULT_SPEED=80000000
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3C0000
+CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk"
@@ -29,7 +31,9 @@ CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
CONFIG_DEFAULT_FDT_FILE="oftree"
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2074
@@ -48,7 +52,9 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
# CONFIG_SPL_CRYPTO is not set
CONFIG_SPL_I2C=y
+CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_FLASH_MTD=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="u-boot=> "
@@ -64,6 +70,8 @@ CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_SF_TEST=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
@@ -77,10 +85,12 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2
@@ -113,6 +123,17 @@ CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
CONFIG_PHYLIB=y
CONFIG_PHY_TI_DP83867=y
CONFIG_DM_ETH_PHY=y
@@ -134,6 +155,9 @@ CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_POWER_I2C=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
--
2.34.1
More information about the U-Boot
mailing list