[PATCH 2/2] board: phytec: phycore_imx8mp: Add mtd spi partitions

[Benjamin Hahn]

Depending on if a SPI-NOR flash is populated add the mtd partition
table to the device tree. For this we have to also probe the
flash before booting.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
 board/phytec/phycore_imx8mp/phycore-imx8mp.c   | 34 ++++++++++++++++++++++++++
 board/phytec/phycore_imx8mp/phycore_imx8mp.env |  4 +++
 2 files changed, 38 insertions(+)

diff --git a/board/phytec/phycore_imx8mp/phycore-imx8mp.c b/board/phytec/phycore_imx8mp/phycore-imx8mp.c
index ef9513618449..bf2d5ce01fa5 100644
--- a/board/phytec/phycore_imx8mp/phycore-imx8mp.c
+++ b/board/phytec/phycore_imx8mp/phycore-imx8mp.c
@@ -10,10 +10,34 @@
 #include <asm/mach-imx/boot_mode.h>
 #include <env.h>
 #include <init.h>
+#include <fdt_support.h>
+#include <jffs2/load_kernel.h>
 #include <miiphy.h>
+#include <mtd_node.h>
+
+#include "../common/imx8m_som_detection.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define EEPROM_ADDR		0x51
+#define EEPROM_ADDR_FALLBACK	0x59
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	u8 spi = phytec_get_imx8m_spi(NULL);
+	/* Do nothing if no SPI is populated */
+	if (!spi)
+		return 0;
+
+	static const struct node_info nodes[] = {
+		{ "jedec,spi-nor", MTD_DEV_TYPE_NOR, },
+	};
+
+	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+
+	return 0;
+}
+
 static int setup_fec(void)
 {
 	struct iomuxc_gpr_base_regs *gpr =
@@ -27,6 +51,11 @@ static int setup_fec(void)
 
 int board_init(void)
 {
+	int ret = phytec_eeprom_data_setup_fallback(NULL, 0,
+			EEPROM_ADDR, EEPROM_ADDR_FALLBACK);
+	if (ret)
+		printf("%s: EEPROM data init failed\n", __func__);
+
 	setup_fec();
 
 	return 0;
@@ -39,6 +68,11 @@ int board_mmc_get_env_dev(int devno)
 
 int board_late_init(void)
 {
+	u8 spi = phytec_get_imx8m_spi(NULL);
+
+	if (spi != 0 && spi != PHYTEC_EEPROM_INVAL)
+		env_set("spiprobe", "sf probe");
+
 	switch (get_boot_device()) {
 	case SD2_BOOT:
 		env_set_ulong("mmcdev", 1);
diff --git a/board/phytec/phycore_imx8mp/phycore_imx8mp.env b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
index f8f878e8f3a6..e5b49756132a 100644
--- a/board/phytec/phycore_imx8mp/phycore_imx8mp.env
+++ b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
@@ -7,6 +7,7 @@ bootcmd=
 	fi;
 	mmc dev ${mmcdev};
 	if mmc rescan; then
+		run spiprobe;
 		if test ${doraucboot} = 1; then
 			run raucinit;
 		fi;
@@ -27,6 +28,9 @@ fdt_addr_r=0x48000000
 fdtfile=CONFIG_DEFAULT_FDT_FILE
 image=Image
 ip_dyn=yes
+mtdparts=30bb0000.spi:3840k(u-boot),128k(env),128k(env_redund),-(none)
+mtdids=nor0=30bb0000.spi
+spiprobe=true
 loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
 loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 mmcargs=

-- 
2.34.1