[PATCH v4 2/9] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver
Minda Chen
minda.chen at starfivetech.com
Thu Aug 29 03:30:51 CEST 2024
Add Starfive JH7110 USB 2.0 PHY driver, which is generic
PHY driver.
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
Reviewed-by: Roger Quadros <rogerq at kernel.org>
---
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/starfive/Kconfig | 14 +++
drivers/phy/starfive/Makefile | 6 +
drivers/phy/starfive/phy-jh7110-usb2.c | 166 +++++++++++++++++++++++++
5 files changed, 188 insertions(+)
create mode 100644 drivers/phy/starfive/Kconfig
create mode 100644 drivers/phy/starfive/Makefile
create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e12347e8a0..f940648fe5 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -309,5 +309,6 @@ source "drivers/phy/cadence/Kconfig"
source "drivers/phy/ti/Kconfig"
source "drivers/phy/qcom/Kconfig"
source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/starfive/Kconfig"
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7a2b764492..6ac867350c 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,3 +44,4 @@ obj-y += cadence/
obj-y += ti/
obj-y += qcom/
obj-y += renesas/
+obj-y += starfive/
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
new file mode 100644
index 0000000000..f28529d1f9
--- /dev/null
+++ b/drivers/phy/starfive/Kconfig
@@ -0,0 +1,14 @@
+#
+# PHY drivers for Starfive platforms
+#
+
+menu "Starfive PHY driver"
+
+config PHY_STARFIVE_JH7110_USB2
+ bool "Starfive JH7110 USB 2.0 PHY driver"
+ select PHY
+ help
+ Enable this to support the Starfive JH7110 USB 2.0 PHY.
+ Generic PHY driver JH7110 USB 2.0.
+
+endmenu
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
new file mode 100644
index 0000000000..a405a75e34
--- /dev/null
+++ b/drivers/phy/starfive/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Starfive
+#
+
+obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-usb2.c b/drivers/phy/starfive/phy-jh7110-usb2.c
new file mode 100644
index 0000000000..6b5780e5fd
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-usb2.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 USB 2.0 PHY driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen at starfivetech.com>
+ */
+
+#include <asm/io.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#define USB_LS_KEEPALIVE_OFF 0x4
+#define USB_LS_KEEPALIVE_ENABLE BIT(4)
+#define USB_PHY_CLK_RATE 125000000
+
+struct jh7110_usb2_phy {
+ struct phy *phy;
+ struct regmap *sys_syscon;
+ void __iomem *regs;
+ struct clk *usb_125m_clk;
+ struct clk *app_125m;
+ struct regmap_field *usb_split;
+ enum phy_mode mode;
+};
+
+static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
+{
+ /* Host mode enable the LS speed keep-alive signal */
+ if (set)
+ clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
+ USB_LS_KEEPALIVE_ENABLE,
+ USB_LS_KEEPALIVE_ENABLE);
+ else
+ clrsetbits_le32(phy->regs + USB_LS_KEEPALIVE_OFF,
+ USB_LS_KEEPALIVE_ENABLE, 0);
+}
+
+static int usb2_phy_set_mode(struct phy *_phy,
+ enum phy_mode mode, int submode)
+{
+ struct udevice *dev = _phy->dev;
+ struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+
+ if (mode == phy->mode)
+ return 0;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ dev_dbg(dev, "Changing phy to %d\n", mode);
+ phy->mode = mode;
+ usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set default split usb 2.0 only mode */
+ regmap_field_write(phy->usb_split, true);
+
+ return 0;
+}
+
+static int jh7110_usb2_phy_init(struct phy *_phy)
+{
+ struct udevice *dev = _phy->dev;
+ struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+ int ret;
+
+ ret = clk_set_rate(phy->usb_125m_clk, USB_PHY_CLK_RATE);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set 125m clock\n");
+ return ret;
+ }
+
+ return clk_prepare_enable(phy->app_125m);
+}
+
+static int jh7110_usb2_phy_exit(struct phy *_phy)
+{
+ struct udevice *dev = _phy->dev;
+ struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+
+ clk_disable_unprepare(phy->app_125m);
+
+ return 0;
+}
+
+struct phy_ops jh7110_usb2_phy_ops = {
+ .init = jh7110_usb2_phy_init,
+ .exit = jh7110_usb2_phy_exit,
+ .set_mode = usb2_phy_set_mode,
+};
+
+int jh7110_usb2_phy_probe(struct udevice *dev)
+{
+ struct jh7110_usb2_phy *phy = dev_get_priv(dev);
+ struct ofnode_phandle_args sys_phandle;
+ struct reg_field usb_split;
+ int ret;
+
+ phy->regs = dev_read_addr_ptr(dev);
+ if (!phy->regs)
+ return -EINVAL;
+
+ ret = dev_read_phandle_with_args(dev, "starfive,sys-syscon", NULL, 1, 0,
+ &sys_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get sys cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ phy->sys_syscon = syscon_node_to_regmap(sys_phandle.node);
+ if (IS_ERR(phy->sys_syscon)) {
+ dev_err(dev, "Can't get syscon regmap: %d\n", ret);
+ return PTR_ERR(phy->sys_syscon);
+ }
+
+ usb_split.reg = sys_phandle.args[0];
+ usb_split.lsb = 17;
+ usb_split.msb = 17;
+ phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split);
+ if (IS_ERR(phy->usb_split)) {
+ dev_err(dev, "USB split field init failed\n");
+ return PTR_ERR(phy->usb_split);
+ }
+
+ phy->usb_125m_clk = devm_clk_get(dev, "125m");
+ if (IS_ERR(phy->usb_125m_clk)) {
+ dev_err(dev, "Failed to get 125m clock\n");
+ return PTR_ERR(phy->usb_125m_clk);
+ }
+
+ phy->app_125m = devm_clk_get(dev, "app_125m");
+ if (IS_ERR(phy->app_125m)) {
+ dev_err(dev, "Failed to get app 125m clock\n");
+ return PTR_ERR(phy->app_125m);
+ }
+
+ return 0;
+}
+
+static const struct udevice_id jh7110_usb2_phy[] = {
+ { .compatible = "starfive,jh7110-usb-phy"},
+ {},
+};
+
+U_BOOT_DRIVER(jh7110_usb2_phy) = {
+ .name = "jh7110_usb2_phy",
+ .id = UCLASS_PHY,
+ .of_match = jh7110_usb2_phy,
+ .probe = jh7110_usb2_phy_probe,
+ .ops = &jh7110_usb2_phy_ops,
+ .priv_auto = sizeof(struct jh7110_usb2_phy),
+};
--
2.17.1
More information about the U-Boot
mailing list