[PATCH] config: imx: Add support for Phytec's phycore imx8mm running SDP gadget
Lukasz Majewski
lukma at denx.de
Thu Aug 15 10:45:04 CEST 2024
After this change it would be possible to boot SDP gadget when Phytec's
Phycore imx8mm module has USB ROM boot selected.
With this change it shall be possible to flash eMMC/SD card content with
uuu program.
Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
configs/phycore-imx8mm_defconfig | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 6748e6fafb..beb2f1e9f0 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x3E0000
CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_PCI=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
@@ -57,6 +58,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_SYS_EEPROM_SIZE=4096
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+# CONFIG_CMD_BIND is not set
CONFIG_CMD_CLK=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
@@ -86,6 +88,10 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
CONFIG_CLK_COMPOSITE_CCF=y
CONFIG_SPL_CLK_IMX8MM=y
CONFIG_CLK_IMX8MM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_UUU_SUPPORT=y
CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
CONFIG_MISC=y
@@ -116,7 +122,6 @@ CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_NVME_PCI=y
CONFIG_PCIE_DW_IMX=y
-CONFIG_PHY=y
CONFIG_PHY_IMX8M_PCIE=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
@@ -136,4 +141,15 @@ CONFIG_SYSRESET_PSCI=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_TMU=y
+CONFIG_USB=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_SDP_LOADADDR=0x40400000
+CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_IMX_WATCHDOG=y
--
2.39.2
More information about the U-Boot
mailing list