[PATCH] mx6: Expand bmode to support ecspi3 boot

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Currently, the bmode command only supports booting from ecspi1.

Expand it to also support booting from ecspi3.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/mach-imx/mx6/soc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index 3a3e01f3d0a..2c0c77e1a56 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -585,6 +585,10 @@ const struct boot_mode soc_boot_modes[] = {
 	{"ecspi1:1",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
 	{"ecspi1:2",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
 	{"ecspi1:3",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
+	{"ecspi3:0",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x0a)},
+	{"ecspi3:1",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x1a)},
+	{"ecspi3:2",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x2a)},
+	{"ecspi3:3",	MAKE_CFGVAL(0x30, 0x00, 0x00, 0x3a)},
 	/* 4 bit bus width */
 	{"esdhc1",	MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
 	{"esdhc2",	MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
-- 
2.34.1