[PATCH] gw_ventana: Remove unneeded comments

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Remove several comments that do not apply anymore to
the current file content.

While at it, write 'PMIC' into a single line for consistency.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 include/configs/gw_ventana.h | 31 +------------------------------
 1 file changed, 1 insertion(+), 30 deletions(-)

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index ebc5d03d0d5..3e720a6e0af 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -6,55 +6,26 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* SPL */
-/* Location in NAND to read U-Boot from */
-
-/* Falcon Mode */
-
-/* Falcon Mode - MMC support: args at 1MB kernel at 2MB */
-
 #include "mx6_common.h"
 
 /* Serial */
 #define CFG_MXC_UART_BASE	       UART2_BASE
 
-/* NAND */
-
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR      0
 
-/*
- * PCI express
- */
-
-/*
- * PMIC
- */
+/* PMIC */
 #define CFG_POWER_PFUZE100_I2C_ADDR	0x08
 #define CFG_POWER_LTC3676_I2C_ADDR  0x3c
 
-/* Various command support */
-
 /* USB Configs */
 #define CFG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CFG_MXC_USB_FLAGS      0
 
-/* Miscellaneous configurable options */
-
-/* Memory configuration */
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 #define CFG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CFG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-/*
- * MTD Command for mtdparts
- */
-
-/* Persistent Environment Config */
-
-/* Environment */
-
 #endif			       /* __CONFIG_H */
-- 
2.34.1