[PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support
Christoph Stoidner
C.Stoidner at phytec.de
Sat Aug 3 11:47:35 CEST 2024
Hello Mathieu,
after a few months I would like to come back to this patch series from
you.
I recognized you increased from patch v2 to v3 the
CONFIG_SYS_MALLOC_F_LEN from 0x18000 to 0x20000.
See v2: https://lists.denx.de/pipermail/u-boot/2024-January/544396.html
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-
phyboard-segin_defconfig
[...]
+CONFIG_SYS_MALLOC_F_LEN=0x18000
and v3: https://lists.denx.de/pipermail/u-boot/2024-January/544493.html
diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-
phyboard-segin_defconfig
[...]
+CONFIG_SYS_MALLOC_F_LEN=0x20000
I could not find any hint in v3 or later versions why you increased it.
Thats why I like to ask you:
What was the specific reason for increasing it to 0x20000?
I like to understand this to decide whether I should apply it too.
Thanks in advance,
Christoph
On Di, 2024-01-30 at 15:50 +0100, Mathieu Othacehe wrote:
> Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based
> on
> the PHYTEC phyCORE-i.MX93 SoM.
>
> Supported features:
> - 1GB LPDDR4 RAM
> - eMMC
> - external SD
> - FEC Ethernet
> - debug UART
> - watchdog
>
> Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
> ---
> Hello,
>
> This new revision fixes the remarks of Primoz. The configuration is
> now
> aligned on the savedefconfig output. The FEC Ethernet is also tested
> to be
> working if this patch is in:
>
> https://patchwork.ozlabs.org/project/uboot/patch/20240130124337.497748-1-primoz.fiser@norik.com/
>
> The proposed patch has been rebased on top of 6faba41.
>
> Thanks,
>
> Mathieu
>
> v3: https://lists.denx.de/pipermail/u-boot/2024-January/544493.html
>
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 293 ++++
> arch/arm/dts/imx93-phyboard-segin.dts | 117 ++
> arch/arm/dts/imx93-phycore-som.dtsi | 126 ++
> arch/arm/mach-imx/imx9/Kconfig | 6 +
> board/phytec/phycore_imx93/Kconfig | 13 +
> board/phytec/phycore_imx93/MAINTAINERS | 10 +
> board/phytec/phycore_imx93/Makefile | 14 +
> board/phytec/phycore_imx93/lpddr4_timing.c | 1546
> +++++++++++++++++
> board/phytec/phycore_imx93/phycore-imx93.c | 42 +
> board/phytec/phycore_imx93/phycore_imx93.env | 73 +
> board/phytec/phycore_imx93/spl.c | 148 ++
> configs/imx93-phyboard-segin_defconfig | 138 ++
> doc/board/phytec/imx93-phyboard-segin.rst | 61 +
> doc/board/phytec/index.rst | 1 +
> include/configs/phycore_imx93.h | 28 +
> 16 files changed, 2618 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx93-phyboard-segin.dts
> create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
> create mode 100644 board/phytec/phycore_imx93/Kconfig
> create mode 100644 board/phytec/phycore_imx93/MAINTAINERS
> create mode 100644 board/phytec/phycore_imx93/Makefile
> create mode 100644 board/phytec/phycore_imx93/lpddr4_timing.c
> create mode 100644 board/phytec/phycore_imx93/phycore-imx93.c
> create mode 100644 board/phytec/phycore_imx93/phycore_imx93.env
> create mode 100644 board/phytec/phycore_imx93/spl.c
> create mode 100644 configs/imx93-phyboard-segin_defconfig
> create mode 100644 doc/board/phytec/imx93-phyboard-segin.rst
> create mode 100644 include/configs/phycore_imx93.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 50f35e3db3f..1a20031b063 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1130,7 +1130,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
>
> dtb-$(CONFIG_ARCH_IMX9) += \
> imx93-11x11-evk.dtb \
> - imx93-var-som-symphony.dtb
> + imx93-var-som-symphony.dtb \
> + imx93-phyboard-segin.dtb
>
> dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
> imxrt1020-evk.dtb \
> diff --git a/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> new file mode 100644
> index 00000000000..8bf28c2de87
> --- /dev/null
> +++ b/arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> @@ -0,0 +1,293 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner at phytec.de>
> + *
> + * Product homepage:
> + * phyBOARD-Segin carrier board is reused for the i.MX93 design.
> + *
> https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
> + */
> +
> +#include "imx93-u-boot.dtsi"
> +
> +/ {
> + wdt-reboot {
> + compatible = "wdt-reboot";
> + wdt = <&wdog3>;
> + bootph-pre-ram;
> + bootph-some-ram;
> + };
> +
> + aliases {
> + ethernet0 = &fec;
> + ethernet1 = &eqos;
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +};
> +
> +&{/soc at 0} {
> + bootph-all;
> + bootph-pre-ram;
> +};
> +
> +&aips1 {
> + bootph-pre-ram;
> + bootph-all;
> +};
> +
> +&aips2 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&aips3 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&iomuxc {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +®_usdhc2_vmmc {
> + u-boot,off-on-delay-us = <20000>;
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_reg_usdhc2_vmmc {
> + bootph-pre-ram;
> +};
> +
> +&pinctrl_uart1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_usdhc1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_usdhc2_cd {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_usdhc2_default {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_usdhc2_100mhz {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&pinctrl_usdhc2_200mhz {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&gpio1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&gpio2 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&gpio3 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&gpio4 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&lpuart1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&usdhc1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&usdhc2 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + fsl,signal-voltage-switch-extra-delay-ms = <8>;
> +};
> +
> +&lpi2c1 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&lpi2c2 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&lpi2c3 {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&s4muap {
> + bootph-pre-ram;
> + bootph-some-ram;
> + status = "okay";
> +};
> +
> +&clk {
> + bootph-all;
> + bootph-pre-ram;
> + /delete-property/ assigned-clocks;
> + /delete-property/ assigned-clock-rates;
> + /delete-property/ assigned-clock-parents;
> +};
> +
> +&osc_32k {
> + bootph-all;
> + bootph-pre-ram;
> +};
> +
> +&osc_24m {
> + bootph-all;
> + bootph-pre-ram;
> +};
> +
> +&clk_ext1 {
> + bootph-all;
> + bootph-pre-ram;
> +};
> +
> +&wdog3 {
> + bootph-all;
> + bootph-pre-ram;
> +};
> +
> +/*
> + * The two nodes below won't be needed once nxp,pca9451a
> + * support is added to the Linux kernel.
> + */
> +&iomuxc {
> + pinctrl_lpi2c3: lpi2c3grp {
> + bootph-pre-ram;
> + fsl,pins = <
> + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x400
> 00b9e
> + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x400
> 00b9e
> + >;
> + };
> +
> + pinctrl_pmic: pmicgrp {
> + bootph-pre-ram;
> + fsl,pins = <
> + MX93_PAD_ENET2_RD3__GPIO4_IO27
> 0x31e
> + >;
> + };
> +};
> +
> +&lpi2c3 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_lpi2c3>;
> + pinctrl-1 = <&pinctrl_lpi2c3>;
> + status = "okay";
> +
> + pmic at 25 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + compatible = "nxp,pca9451a";
> + reg = <0x25>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
> +
> + regulators {
> + bootph-pre-ram;
> + bootph-some-ram;
> + buck1: BUCK1 {
> + regulator-name = "VDD_SOC";
> + regulator-min-microvolt = <610000>;
> + regulator-max-microvolt = <950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <3125>;
> + };
> +
> + buck2: BUCK2 {
> + regulator-name = "VDDQ_0V6";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <600000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck4: BUCK4 {
> + regulator-name = "VDD_3V3_BUCK";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck5: BUCK5 {
> + regulator-name = "VDD_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + buck6: BUCK6 {
> + regulator-name = "VDD_1V1";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo1: LDO1 {
> + regulator-name = "PMIC_SNVS_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "VDD_0V8";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo5: LDO5 {
> + regulator-name = "NVCC_SD2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/dts/imx93-phyboard-segin.dts
> b/arch/arm/dts/imx93-phyboard-segin.dts
> new file mode 100644
> index 00000000000..85fb188b057
> --- /dev/null
> +++ b/arch/arm/dts/imx93-phyboard-segin.dts
> @@ -0,0 +1,117 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Wadim Egorov <w.egorov at phytec.de>, Christoph Stoidner
> <c.stoidner at phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> + *
> + * Product homepage:
> + * phyBOARD-Segin carrier board is reused for the i.MX93 design.
> + *
> https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
> + */
> +/dts-v1/;
> +
> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> + model = "PHYTEC phyBOARD-Segin-i.MX93";
> + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-
> phycore-som",
> + "fsl,imx93";
> +
> + chosen {
> + stdout-path = &lpuart1;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2 {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "VCC_SD";
> + };
> +};
> +
> +/* Console */
> +&lpuart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> + no-1-8-v;
> +};
> +
> +/* SD-Card */
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
> + bus-width = <4>;
> + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
> + no-mmc;
> + no-sdio;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
> + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e
> + >;
> + };
> +
> + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc2_cd: usdhc2cdgrp {
> + fsl,pins = <
> + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc2_default: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179
> e
> + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139
> e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138
> e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138
> e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138
> e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139
> e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK
> 0x179e
> + MX93_PAD_SD2_CMD__USDHC2_CMD
> 0x139e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0
> 0x138e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1
> 0x138e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2
> 0x139e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3
> 0x139e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp {
> + fsl,pins = <
> + MX93_PAD_SD2_CLK__USDHC2_CLK
> 0x178e
> + MX93_PAD_SD2_CMD__USDHC2_CMD
> 0x139e
> + MX93_PAD_SD2_DATA0__USDHC2_DATA0
> 0x139e
> + MX93_PAD_SD2_DATA1__USDHC2_DATA1
> 0x139e
> + MX93_PAD_SD2_DATA2__USDHC2_DATA2
> 0x139e
> + MX93_PAD_SD2_DATA3__USDHC2_DATA3
> 0x139e
> + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
> + >;
> + };
> +};
> diff --git a/arch/arm/dts/imx93-phycore-som.dtsi
> b/arch/arm/dts/imx93-phycore-som.dtsi
> new file mode 100644
> index 00000000000..88c2657b50e
> --- /dev/null
> +++ b/arch/arm/dts/imx93-phycore-som.dtsi
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Wadim Egorov <w.egorov at phytec.de>, Christoph Stoidner
> <c.stoidner at phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> + *
> + * Product homepage:
> + *
> https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
> + */
> +
> +#include <dt-bindings/leds/common.h>
> +
> +#include "imx93.dtsi"
> +
> +/{
> + model = "PHYTEC phyCORE-i.MX93";
> + compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> + reserved-memory {
> + ranges;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + alloc-ranges = <0 0x80000000 0 0x40000000>;
> + size = <0 0x10000000>;
> + linux,cma-default;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_leds>;
> +
> + led-0 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_HEARTBEAT;
> + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +/* Ethernet */
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec>;
> + phy-mode = "rmii";
> + phy-handle = <ðphy1>;
> + fsl,magic-packet;
> + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
> + <&clk IMX93_CLK_ENET_REF>,
> + <&clk IMX93_CLK_ENET_REF_PHY>;
> + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
> + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
> + assigned-clock-rates = <100000000>, <50000000>, <50000000>;
> + status = "okay";
> +
> + mdio: mdio {
> + clock-frequency = <5000000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy at 1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
> + };
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +/* Watchdog */
> +&wdog3 {
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_fec: fecgrp {
> + fsl,pins = <
> + MX93_PAD_ENET2_MDC__ENET1_MDC
> 0x50e
> + MX93_PAD_ENET2_MDIO__ENET1_MDIO
> 0x502
> + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0
> 0x57e
> + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1
> 0x57e
> + MX93_PAD_ENET2_RXC__ENET1_RX_ER
> 0x5fe
> + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL
> 0x57e
> + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0
> 0x50e
> + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1
> 0x50e
> + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL
> 0x50e
> + MX93_PAD_ENET2_TD2__ENET1_TX_CLK
> 0x4000050e
> + >;
> + };
> +
> + pinctrl_leds: ledsgrp {
> + fsl,pins = <
> + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX93_PAD_SD1_CLK__USDHC1_CLK 0x179
> e
> + MX93_PAD_SD1_CMD__USDHC1_CMD 0x138
> 6
> + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138
> e
> + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x138
> 6
> + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138
> e
> + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x138
> 6
> + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x138
> 6
> + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x138
> 6
> + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x138
> 6
> + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x138
> 6
> + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179
> e
> + >;
> + };
> +};
> diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-
> imx/imx9/Kconfig
> index 961d6f527ab..b79485f1f75 100644
> --- a/arch/arm/mach-imx/imx9/Kconfig
> +++ b/arch/arm/mach-imx/imx9/Kconfig
> @@ -37,9 +37,15 @@ config TARGET_IMX93_VAR_SOM
> select IMX93
> select IMX9_LPDDR4X
>
> +config TARGET_PHYCORE_IMX93
> + bool "phycore_imx93"
> + select IMX93
> + select IMX9_LPDDR4X
> +
> endchoice
>
> source "board/freescale/imx93_evk/Kconfig"
> +source "board/phytec/phycore_imx93/Kconfig"
> source "board/variscite/imx93_var_som/Kconfig"
>
> endif
> diff --git a/board/phytec/phycore_imx93/Kconfig
> b/board/phytec/phycore_imx93/Kconfig
> new file mode 100644
> index 00000000000..a70104cb798
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/Kconfig
> @@ -0,0 +1,13 @@
> +
> +if TARGET_PHYCORE_IMX93
> +
> +config SYS_BOARD
> + default "phycore_imx93"
> +
> +config SYS_VENDOR
> + default "phytec"
> +
> +config SYS_CONFIG_NAME
> + default "phycore_imx93"
> +
> +endif
> diff --git a/board/phytec/phycore_imx93/MAINTAINERS
> b/board/phytec/phycore_imx93/MAINTAINERS
> new file mode 100644
> index 00000000000..9e91a29dc31
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/MAINTAINERS
> @@ -0,0 +1,10 @@
> +phyCORE-i.MX93
> +M: Mathieu Othacehe <m.othacehe at gmail.com>
> +W:
> https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
> +S: Maintained
> +F: arch/arm/dts/imx93-phyboard-segin.dts
> +F: arch/arm/dts/imx93-phycore-som.dtsi
> +F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi
> +F: board/phytec/phycore_imx93/
> +F: configs/imx93-phyboard-segin_defconfig
> +F: include/configs/phycore_imx93.h
> diff --git a/board/phytec/phycore_imx93/Makefile
> b/board/phytec/phycore_imx93/Makefile
> new file mode 100644
> index 00000000000..ce35326a156
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/Makefile
> @@ -0,0 +1,14 @@
> +#
> +# Copyright 2022 NXP
> +# Copyright (C) 2023 PHYTEC Messtechnik GmbH
> +# Christoph Stoidner <c.stoidner at phytec.de>
> +# Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y += phycore-imx93.o
> +
> +ifdef CONFIG_SPL_BUILD
> +obj-y += spl.o lpddr4_timing.o
> +endif
> diff --git a/board/phytec/phycore_imx93/lpddr4_timing.c
> b/board/phytec/phycore_imx93/lpddr4_timing.c
> new file mode 100644
> index 00000000000..2111972a40e
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/lpddr4_timing.c
> @@ -0,0 +1,1546 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2023 NXP
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner at phytec.de>
> + *
> + * Code generated with DDR Tool v1.0.0.
> + */
> +
> +#include <linux/kernel.h>
> +#include <asm/arch/ddr.h>
> +
> +static struct dram_cfg_param ddr_ddrc_cfg[] = {
> + /** Initialize DDRC registers **/
> + {0x4e300110, 0x44100001},
> + {0x4e300000, 0x8000bf},
> + {0x4e300008, 0x0},
> + {0x4e300080, 0x80000412},
> + {0x4e300084, 0x0},
> + {0x4e300114, 0x1002},
> + {0x4e300260, 0x4080},
> + {0x4e300f04, 0x80},
> + {0x4e300800, 0x43b30002},
> + {0x4e300804, 0x1f1f1f1f},
> + {0x4e301000, 0x0},
> + {0x4e301240, 0x0},
> + {0x4e301244, 0x0},
> + {0x4e301248, 0x0},
> + {0x4e30124c, 0x0},
> + {0x4e301250, 0x0},
> + {0x4e301254, 0x0},
> + {0x4e301258, 0x0},
> + {0x4e30125c, 0x0},
> +
> +};
> +
> +/* dram fsp cfg */
> +static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
> + {
> + {
> + {0x4e300100, 0x24A0421B},
> + {0x4e300104, 0xF8EE001B},
> + {0x4e300108, 0x2F263233},
> + {0x4e30010C, 0x0005E18B},
> + {0x4e300124, 0x1C770000},
> + {0x4e300160, 0x00009102},
> + {0x4e30016C, 0x35F00000},
> + {0x4e300170, 0x8B0B0608},
> + {0x4e300250, 0x00000028},
> + {0x4e300254, 0x00FE00FE},
> + {0x4e300258, 0x00000008},
> + {0x4e30025C, 0x00000400},
> + {0x4e300300, 0x224F2215},
> + {0x4e300304, 0x00FE2213},
> + {0x4e300308, 0x0A3C0E3C},
> + },
> + {
> + {0x01, 0xE4},
> + {0x02, 0x36},
> + {0x03, 0xF2},
> + {0x0b, 0x46},
> + {0x0c, 0x11},
> + {0x0e, 0x11},
> + {0x16, 0x04},
> + },
> + 0,
> + },
> +
> +};
> +
> +/* PHY Initialize Configuration */
> +static struct dram_cfg_param ddr_ddrphy_cfg[] = {
> + {0x100a0, 0x0},
> + {0x100a1, 0x1},
> + {0x100a2, 0x2},
> + {0x100a3, 0x3},
> + {0x100a4, 0x4},
> + {0x100a5, 0x5},
> + {0x100a6, 0x6},
> + {0x100a7, 0x7},
> + {0x110a0, 0x0},
> + {0x110a1, 0x1},
> + {0x110a2, 0x2},
> + {0x110a3, 0x3},
> + {0x110a4, 0x4},
> + {0x110a5, 0x5},
> + {0x110a6, 0x6},
> + {0x110a7, 0x7},
> + {0x1005f, 0x5ff},
> + {0x1015f, 0x5ff},
> + {0x1105f, 0x5ff},
> + {0x1115f, 0x5ff},
> + {0x55, 0x1ff},
> + {0x1055, 0x1ff},
> + {0x2055, 0x1ff},
> + {0x200c5, 0x19},
> + {0x2002e, 0x2},
> + {0x90204, 0x0},
> + {0x20024, 0x1e3},
> + {0x2003a, 0x2},
> + {0x2007d, 0x212},
> + {0x2007c, 0x61},
> + {0x20056, 0x3},
> + {0x1004d, 0x600},
> + {0x1014d, 0x600},
> + {0x1104d, 0x600},
> + {0x1114d, 0x600},
> + {0x10049, 0xe00},
> + {0x10149, 0xe00},
> + {0x11049, 0xe00},
> + {0x11149, 0xe00},
> + {0x43, 0x60},
> + {0x1043, 0x60},
> + {0x2043, 0x60},
> + {0x20018, 0x1},
> + {0x20075, 0x4},
> + {0x20050, 0x0},
> + {0x2009b, 0x2},
> + {0x20008, 0x3a5},
> + {0x20088, 0x9},
> + {0x200b2, 0x10c},
> + {0x10043, 0x5a1},
> + {0x10143, 0x5a1},
> + {0x11043, 0x5a1},
> + {0x11143, 0x5a1},
> + {0x200fa, 0x2},
> + {0x20019, 0x1},
> + {0x200f0, 0x600},
> + {0x200f1, 0x0},
> + {0x200f2, 0x4444},
> + {0x200f3, 0x8888},
> + {0x200f4, 0x5655},
> + {0x200f5, 0x0},
> + {0x200f6, 0x0},
> + {0x200f7, 0xf000},
> + {0x20025, 0x0},
> + {0x2002d, 0x1},
> + {0x2002c, 0x0},
> + {0x20021, 0x0},
> + {0x200c7, 0x21},
> + {0x1200c7, 0x21},
> + {0x200ca, 0x24},
> + {0x1200ca, 0x24},
> +
> +};
> +
> +/* ddr phy trained csr */
> +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
> + {0x1005f, 0x0},
> + {0x1015f, 0x0},
> + {0x1105f, 0x0},
> + {0x1115f, 0x0},
> + {0x55, 0x0},
> + {0x1055, 0x0},
> + {0x2055, 0x0},
> + {0x200c5, 0x0},
> + {0x2002e, 0x0},
> + {0x90204, 0x0},
> + {0x20024, 0x0},
> + {0x2003a, 0x0},
> + {0x2007d, 0x0},
> + {0x2007c, 0x0},
> + {0x20056, 0x0},
> + {0x1004d, 0x0},
> + {0x1014d, 0x0},
> + {0x1104d, 0x0},
> + {0x1114d, 0x0},
> + {0x10049, 0x0},
> + {0x10149, 0x0},
> + {0x11049, 0x0},
> + {0x11149, 0x0},
> + {0x43, 0x0},
> + {0x1043, 0x0},
> + {0x2043, 0x0},
> + {0x20018, 0x0},
> + {0x20075, 0x0},
> + {0x20050, 0x0},
> + {0x2009b, 0x0},
> + {0x20008, 0x0},
> + {0x20088, 0x0},
> + {0x200b2, 0x0},
> + {0x10043, 0x0},
> + {0x10143, 0x0},
> + {0x11043, 0x0},
> + {0x11143, 0x0},
> + {0x200fa, 0x0},
> + {0x20019, 0x0},
> + {0x200f0, 0x0},
> + {0x200f1, 0x0},
> + {0x200f2, 0x0},
> + {0x200f3, 0x0},
> + {0x200f4, 0x0},
> + {0x200f5, 0x0},
> + {0x200f6, 0x0},
> + {0x200f7, 0x0},
> + {0x20025, 0x0},
> + {0x2002d, 0x0},
> + {0x2002c, 0x0},
> + {0xd0000, 0x0},
> + {0x90000, 0x0},
> + {0x90001, 0x0},
> + {0x90002, 0x0},
> + {0x90003, 0x0},
> + {0x90004, 0x0},
> + {0x90005, 0x0},
> + {0x90029, 0x0},
> + {0x9002a, 0x0},
> + {0x9002b, 0x0},
> + {0x9002c, 0x0},
> + {0x9002d, 0x0},
> + {0x9002e, 0x0},
> + {0x9002f, 0x0},
> + {0x90030, 0x0},
> + {0x90031, 0x0},
> + {0x90032, 0x0},
> + {0x90033, 0x0},
> + {0x90034, 0x0},
> + {0x90035, 0x0},
> + {0x90036, 0x0},
> + {0x90037, 0x0},
> + {0x90038, 0x0},
> + {0x90039, 0x0},
> + {0x9003a, 0x0},
> + {0x9003b, 0x0},
> + {0x9003c, 0x0},
> + {0x9003d, 0x0},
> + {0x9003e, 0x0},
> + {0x9003f, 0x0},
> + {0x90040, 0x0},
> + {0x90041, 0x0},
> + {0x90042, 0x0},
> + {0x90043, 0x0},
> + {0x90044, 0x0},
> + {0x90045, 0x0},
> + {0x90046, 0x0},
> + {0x90047, 0x0},
> + {0x90048, 0x0},
> + {0x90049, 0x0},
> + {0x9004a, 0x0},
> + {0x9004b, 0x0},
> + {0x9004c, 0x0},
> + {0x9004d, 0x0},
> + {0x9004e, 0x0},
> + {0x9004f, 0x0},
> + {0x90050, 0x0},
> + {0x90051, 0x0},
> + {0x90052, 0x0},
> + {0x90053, 0x0},
> + {0x90054, 0x0},
> + {0x90055, 0x0},
> + {0x90056, 0x0},
> + {0x90057, 0x0},
> + {0x90058, 0x0},
> + {0x90059, 0x0},
> + {0x9005a, 0x0},
> + {0x9005b, 0x0},
> + {0x9005c, 0x0},
> + {0x9005d, 0x0},
> + {0x9005e, 0x0},
> + {0x9005f, 0x0},
> + {0x90060, 0x0},
> + {0x90061, 0x0},
> + {0x90062, 0x0},
> + {0x90063, 0x0},
> + {0x90064, 0x0},
> + {0x90065, 0x0},
> + {0x90066, 0x0},
> + {0x90067, 0x0},
> + {0x90068, 0x0},
> + {0x90069, 0x0},
> + {0x9006a, 0x0},
> + {0x9006b, 0x0},
> + {0x9006c, 0x0},
> + {0x9006d, 0x0},
> + {0x9006e, 0x0},
> + {0x9006f, 0x0},
> + {0x90070, 0x0},
> + {0x90071, 0x0},
> + {0x90072, 0x0},
> + {0x90073, 0x0},
> + {0x90074, 0x0},
> + {0x90075, 0x0},
> + {0x90076, 0x0},
> + {0x90077, 0x0},
> + {0x90078, 0x0},
> + {0x90079, 0x0},
> + {0x9007a, 0x0},
> + {0x9007b, 0x0},
> + {0x9007c, 0x0},
> + {0x9007d, 0x0},
> + {0x9007e, 0x0},
> + {0x9007f, 0x0},
> + {0x90080, 0x0},
> + {0x90081, 0x0},
> + {0x90082, 0x0},
> + {0x90083, 0x0},
> + {0x90084, 0x0},
> + {0x90085, 0x0},
> + {0x90086, 0x0},
> + {0x90087, 0x0},
> + {0x90088, 0x0},
> + {0x90089, 0x0},
> + {0x9008a, 0x0},
> + {0x9008b, 0x0},
> + {0x9008c, 0x0},
> + {0x9008d, 0x0},
> + {0x9008e, 0x0},
> + {0x9008f, 0x0},
> + {0x90090, 0x0},
> + {0x90091, 0x0},
> + {0x90092, 0x0},
> + {0x90093, 0x0},
> + {0x90094, 0x0},
> + {0x90095, 0x0},
> + {0x90096, 0x0},
> + {0x90097, 0x0},
> + {0x90098, 0x0},
> + {0x90099, 0x0},
> + {0x9009a, 0x0},
> + {0x9009b, 0x0},
> + {0x9009c, 0x0},
> + {0x9009d, 0x0},
> + {0x9009e, 0x0},
> + {0x9009f, 0x0},
> + {0x900a0, 0x0},
> + {0x900a1, 0x0},
> + {0x900a2, 0x0},
> + {0x900a3, 0x0},
> + {0x900a4, 0x0},
> + {0x900a5, 0x0},
> + {0x900a6, 0x0},
> + {0x900a7, 0x0},
> + {0x900a8, 0x0},
> + {0x900a9, 0x0},
> + {0x40000, 0x0},
> + {0x40020, 0x0},
> + {0x40040, 0x0},
> + {0x40060, 0x0},
> + {0x40001, 0x0},
> + {0x40021, 0x0},
> + {0x40041, 0x0},
> + {0x40061, 0x0},
> + {0x40002, 0x0},
> + {0x40022, 0x0},
> + {0x40042, 0x0},
> + {0x40062, 0x0},
> + {0x40003, 0x0},
> + {0x40023, 0x0},
> + {0x40043, 0x0},
> + {0x40063, 0x0},
> + {0x40004, 0x0},
> + {0x40024, 0x0},
> + {0x40044, 0x0},
> + {0x40064, 0x0},
> + {0x40005, 0x0},
> + {0x40025, 0x0},
> + {0x40045, 0x0},
> + {0x40065, 0x0},
> + {0x40006, 0x0},
> + {0x40026, 0x0},
> + {0x40046, 0x0},
> + {0x40066, 0x0},
> + {0x40007, 0x0},
> + {0x40027, 0x0},
> + {0x40047, 0x0},
> + {0x40067, 0x0},
> + {0x40008, 0x0},
> + {0x40028, 0x0},
> + {0x40048, 0x0},
> + {0x40068, 0x0},
> + {0x40009, 0x0},
> + {0x40029, 0x0},
> + {0x40049, 0x0},
> + {0x40069, 0x0},
> + {0x4000a, 0x0},
> + {0x4002a, 0x0},
> + {0x4004a, 0x0},
> + {0x4006a, 0x0},
> + {0x4000b, 0x0},
> + {0x4002b, 0x0},
> + {0x4004b, 0x0},
> + {0x4006b, 0x0},
> + {0x4000c, 0x0},
> + {0x4002c, 0x0},
> + {0x4004c, 0x0},
> + {0x4006c, 0x0},
> + {0x4000d, 0x0},
> + {0x4002d, 0x0},
> + {0x4004d, 0x0},
> + {0x4006d, 0x0},
> + {0x4000e, 0x0},
> + {0x4002e, 0x0},
> + {0x4004e, 0x0},
> + {0x4006e, 0x0},
> + {0x4000f, 0x0},
> + {0x4002f, 0x0},
> + {0x4004f, 0x0},
> + {0x4006f, 0x0},
> + {0x40010, 0x0},
> + {0x40030, 0x0},
> + {0x40050, 0x0},
> + {0x40070, 0x0},
> + {0x40011, 0x0},
> + {0x40031, 0x0},
> + {0x40051, 0x0},
> + {0x40071, 0x0},
> + {0x40012, 0x0},
> + {0x40032, 0x0},
> + {0x40052, 0x0},
> + {0x40072, 0x0},
> + {0x40013, 0x0},
> + {0x40033, 0x0},
> + {0x40053, 0x0},
> + {0x40073, 0x0},
> + {0x40014, 0x0},
> + {0x40034, 0x0},
> + {0x40054, 0x0},
> + {0x40074, 0x0},
> + {0x40015, 0x0},
> + {0x40035, 0x0},
> + {0x40055, 0x0},
> + {0x40075, 0x0},
> + {0x40016, 0x0},
> + {0x40036, 0x0},
> + {0x40056, 0x0},
> + {0x40076, 0x0},
> + {0x40017, 0x0},
> + {0x40037, 0x0},
> + {0x40057, 0x0},
> + {0x40077, 0x0},
> + {0x40018, 0x0},
> + {0x40038, 0x0},
> + {0x40058, 0x0},
> + {0x40078, 0x0},
> + {0x40019, 0x0},
> + {0x40039, 0x0},
> + {0x40059, 0x0},
> + {0x40079, 0x0},
> + {0x4001a, 0x0},
> + {0x4003a, 0x0},
> + {0x4005a, 0x0},
> + {0x4007a, 0x0},
> + {0x900aa, 0x0},
> + {0x900ab, 0x0},
> + {0x900ac, 0x0},
> + {0x900ad, 0x0},
> + {0x900ae, 0x0},
> + {0x900af, 0x0},
> + {0x900b0, 0x0},
> + {0x900b1, 0x0},
> + {0x900b2, 0x0},
> + {0x900b3, 0x0},
> + {0x900b4, 0x0},
> + {0x900b5, 0x0},
> + {0x900b6, 0x0},
> + {0x900b7, 0x0},
> + {0x900b8, 0x0},
> + {0x900b9, 0x0},
> + {0x900ba, 0x0},
> + {0x900bb, 0x0},
> + {0x900bc, 0x0},
> + {0x900bd, 0x0},
> + {0x900be, 0x0},
> + {0x900bf, 0x0},
> + {0x900c0, 0x0},
> + {0x900c1, 0x0},
> + {0x900c2, 0x0},
> + {0x900c3, 0x0},
> + {0x900c4, 0x0},
> + {0x900c5, 0x0},
> + {0x900c6, 0x0},
> + {0x900c7, 0x0},
> + {0x900c8, 0x0},
> + {0x900c9, 0x0},
> + {0x900ca, 0x0},
> + {0x900cb, 0x0},
> + {0x900cc, 0x0},
> + {0x900cd, 0x0},
> + {0x900ce, 0x0},
> + {0x900cf, 0x0},
> + {0x900d0, 0x0},
> + {0x900d1, 0x0},
> + {0x900d2, 0x0},
> + {0x900d3, 0x0},
> + {0x900d4, 0x0},
> + {0x900d5, 0x0},
> + {0x900d6, 0x0},
> + {0x900d7, 0x0},
> + {0x900d8, 0x0},
> + {0x900d9, 0x0},
> + {0x900da, 0x0},
> + {0x900db, 0x0},
> + {0x900dc, 0x0},
> + {0x900dd, 0x0},
> + {0x900de, 0x0},
> + {0x900df, 0x0},
> + {0x900e0, 0x0},
> + {0x900e1, 0x0},
> + {0x900e2, 0x0},
> + {0x900e3, 0x0},
> + {0x900e4, 0x0},
> + {0x900e5, 0x0},
> + {0x900e6, 0x0},
> + {0x900e7, 0x0},
> + {0x900e8, 0x0},
> + {0x900e9, 0x0},
> + {0x900ea, 0x0},
> + {0x900eb, 0x0},
> + {0x900ec, 0x0},
> + {0x900ed, 0x0},
> + {0x900ee, 0x0},
> + {0x900ef, 0x0},
> + {0x900f0, 0x0},
> + {0x900f1, 0x0},
> + {0x900f2, 0x0},
> + {0x900f3, 0x0},
> + {0x900f4, 0x0},
> + {0x900f5, 0x0},
> + {0x900f6, 0x0},
> + {0x900f7, 0x0},
> + {0x900f8, 0x0},
> + {0x900f9, 0x0},
> + {0x900fa, 0x0},
> + {0x900fb, 0x0},
> + {0x900fc, 0x0},
> + {0x900fd, 0x0},
> + {0x900fe, 0x0},
> + {0x900ff, 0x0},
> + {0x90100, 0x0},
> + {0x90101, 0x0},
> + {0x90102, 0x0},
> + {0x90103, 0x0},
> + {0x90104, 0x0},
> + {0x90105, 0x0},
> + {0x90106, 0x0},
> + {0x90107, 0x0},
> + {0x90108, 0x0},
> + {0x90109, 0x0},
> + {0x9010a, 0x0},
> + {0x9010b, 0x0},
> + {0x9010c, 0x0},
> + {0x9010d, 0x0},
> + {0x9010e, 0x0},
> + {0x9010f, 0x0},
> + {0x90110, 0x0},
> + {0x90111, 0x0},
> + {0x90112, 0x0},
> + {0x90113, 0x0},
> + {0x90114, 0x0},
> + {0x90115, 0x0},
> + {0x90116, 0x0},
> + {0x90117, 0x0},
> + {0x90118, 0x0},
> + {0x90119, 0x0},
> + {0x9011a, 0x0},
> + {0x9011b, 0x0},
> + {0x9011c, 0x0},
> + {0x9011d, 0x0},
> + {0x9011e, 0x0},
> + {0x9011f, 0x0},
> + {0x90120, 0x0},
> + {0x90121, 0x0},
> + {0x90122, 0x0},
> + {0x90123, 0x0},
> + {0x90124, 0x0},
> + {0x90125, 0x0},
> + {0x90126, 0x0},
> + {0x90127, 0x0},
> + {0x90128, 0x0},
> + {0x90129, 0x0},
> + {0x9012a, 0x0},
> + {0x9012b, 0x0},
> + {0x9012c, 0x0},
> + {0x9012d, 0x0},
> + {0x9012e, 0x0},
> + {0x9012f, 0x0},
> + {0x90130, 0x0},
> + {0x90131, 0x0},
> + {0x90132, 0x0},
> + {0x90133, 0x0},
> + {0x90134, 0x0},
> + {0x90135, 0x0},
> + {0x90136, 0x0},
> + {0x90137, 0x0},
> + {0x90138, 0x0},
> + {0x90139, 0x0},
> + {0x9013a, 0x0},
> + {0x9013b, 0x0},
> + {0x9013c, 0x0},
> + {0x9013d, 0x0},
> + {0x9013e, 0x0},
> + {0x9013f, 0x0},
> + {0x90140, 0x0},
> + {0x90141, 0x0},
> + {0x90142, 0x0},
> + {0x90143, 0x0},
> + {0x90144, 0x0},
> + {0x90145, 0x0},
> + {0x90146, 0x0},
> + {0x90147, 0x0},
> + {0x90148, 0x0},
> + {0x90149, 0x0},
> + {0x9014a, 0x0},
> + {0x9014b, 0x0},
> + {0x9014c, 0x0},
> + {0x9014d, 0x0},
> + {0x9014e, 0x0},
> + {0x9014f, 0x0},
> + {0x90150, 0x0},
> + {0x90151, 0x0},
> + {0x90152, 0x0},
> + {0x90153, 0x0},
> + {0x90154, 0x0},
> + {0x90155, 0x0},
> + {0x90156, 0x0},
> + {0x90157, 0x0},
> + {0x90158, 0x0},
> + {0x90159, 0x0},
> + {0x9015a, 0x0},
> + {0x9015b, 0x0},
> + {0x9015c, 0x0},
> + {0x9015d, 0x0},
> + {0x9015e, 0x0},
> + {0x9015f, 0x0},
> + {0x90160, 0x0},
> + {0x90161, 0x0},
> + {0x90162, 0x0},
> + {0x90163, 0x0},
> + {0x90164, 0x0},
> + {0x90165, 0x0},
> + {0x90166, 0x0},
> + {0x90167, 0x0},
> + {0x90168, 0x0},
> + {0x90169, 0x0},
> + {0x9016a, 0x0},
> + {0x9016b, 0x0},
> + {0x9016c, 0x0},
> + {0x9016d, 0x0},
> + {0x9016e, 0x0},
> + {0x9016f, 0x0},
> + {0x90170, 0x0},
> + {0x90171, 0x0},
> + {0x90172, 0x0},
> + {0x90173, 0x0},
> + {0x90174, 0x0},
> + {0x90175, 0x0},
> + {0x90176, 0x0},
> + {0x90177, 0x0},
> + {0x90178, 0x0},
> + {0x90179, 0x0},
> + {0x9017a, 0x0},
> + {0x9017b, 0x0},
> + {0x9017c, 0x0},
> + {0x9017d, 0x0},
> + {0x9017e, 0x0},
> + {0x9017f, 0x0},
> + {0x90180, 0x0},
> + {0x90181, 0x0},
> + {0x90182, 0x0},
> + {0x90183, 0x0},
> + {0x90184, 0x0},
> + {0x90006, 0x0},
> + {0x90007, 0x0},
> + {0x90008, 0x0},
> + {0x90009, 0x0},
> + {0x9000a, 0x0},
> + {0x9000b, 0x0},
> + {0xd00e7, 0x0},
> + {0x90017, 0x0},
> + {0x9001f, 0x0},
> + {0x90026, 0x0},
> + {0x400d0, 0x0},
> + {0x400d1, 0x0},
> + {0x400d2, 0x0},
> + {0x400d3, 0x0},
> + {0x400d4, 0x0},
> + {0x400d5, 0x0},
> + {0x400d6, 0x0},
> + {0x400d7, 0x0},
> + {0x200be, 0x0},
> + {0x2000b, 0x0},
> + {0x2000c, 0x0},
> + {0x2000d, 0x0},
> + {0x2000e, 0x0},
> + {0x9000c, 0x0},
> + {0x9000d, 0x0},
> + {0x9000e, 0x0},
> + {0x9000f, 0x0},
> + {0x90010, 0x0},
> + {0x90011, 0x0},
> + {0x90012, 0x0},
> + {0x90013, 0x0},
> + {0x20010, 0x0},
> + {0x20011, 0x0},
> + {0x40080, 0x0},
> + {0x40081, 0x0},
> + {0x40082, 0x0},
> + {0x40083, 0x0},
> + {0x40084, 0x0},
> + {0x40085, 0x0},
> + {0x400fd, 0x0},
> + {0x400f1, 0x0},
> + {0x10011, 0x0},
> + {0x10012, 0x0},
> + {0x10013, 0x0},
> + {0x10018, 0x0},
> + {0x10002, 0x0},
> + {0x100b2, 0x0},
> + {0x101b4, 0x0},
> + {0x102b4, 0x0},
> + {0x103b4, 0x0},
> + {0x104b4, 0x0},
> + {0x105b4, 0x0},
> + {0x106b4, 0x0},
> + {0x107b4, 0x0},
> + {0x108b4, 0x0},
> + {0x11011, 0x0},
> + {0x11012, 0x0},
> + {0x11013, 0x0},
> + {0x11018, 0x0},
> + {0x11002, 0x0},
> + {0x110b2, 0x0},
> + {0x111b4, 0x0},
> + {0x112b4, 0x0},
> + {0x113b4, 0x0},
> + {0x114b4, 0x0},
> + {0x115b4, 0x0},
> + {0x116b4, 0x0},
> + {0x117b4, 0x0},
> + {0x118b4, 0x0},
> + {0x20089, 0x0},
> + {0xc0080, 0x0},
> + {0x200cb, 0x0},
> + {0x10068, 0x0},
> + {0x10069, 0x0},
> + {0x10168, 0x0},
> + {0x10169, 0x0},
> + {0x10268, 0x0},
> + {0x10269, 0x0},
> + {0x10368, 0x0},
> + {0x10369, 0x0},
> + {0x10468, 0x0},
> + {0x10469, 0x0},
> + {0x10568, 0x0},
> + {0x10569, 0x0},
> + {0x10668, 0x0},
> + {0x10669, 0x0},
> + {0x10768, 0x0},
> + {0x10769, 0x0},
> + {0x10868, 0x0},
> + {0x10869, 0x0},
> + {0x100aa, 0x0},
> + {0x10062, 0x0},
> + {0x10001, 0x0},
> + {0x100a0, 0x0},
> + {0x100a1, 0x0},
> + {0x100a2, 0x0},
> + {0x100a3, 0x0},
> + {0x100a4, 0x0},
> + {0x100a5, 0x0},
> + {0x100a6, 0x0},
> + {0x100a7, 0x0},
> + {0x11068, 0x0},
> + {0x11069, 0x0},
> + {0x11168, 0x0},
> + {0x11169, 0x0},
> + {0x11268, 0x0},
> + {0x11269, 0x0},
> + {0x11368, 0x0},
> + {0x11369, 0x0},
> + {0x11468, 0x0},
> + {0x11469, 0x0},
> + {0x11568, 0x0},
> + {0x11569, 0x0},
> + {0x11668, 0x0},
> + {0x11669, 0x0},
> + {0x11768, 0x0},
> + {0x11769, 0x0},
> + {0x11868, 0x0},
> + {0x11869, 0x0},
> + {0x110aa, 0x0},
> + {0x11062, 0x0},
> + {0x11001, 0x0},
> + {0x110a0, 0x0},
> + {0x110a1, 0x0},
> + {0x110a2, 0x0},
> + {0x110a3, 0x0},
> + {0x110a4, 0x0},
> + {0x110a5, 0x0},
> + {0x110a6, 0x0},
> + {0x110a7, 0x0},
> + {0x80, 0x0},
> + {0x1080, 0x0},
> + {0x2080, 0x0},
> + {0x10020, 0x0},
> + {0x10080, 0x0},
> + {0x10081, 0x0},
> + {0x100d0, 0x0},
> + {0x100d1, 0x0},
> + {0x1008c, 0x0},
> + {0x1008d, 0x0},
> + {0x10180, 0x0},
> + {0x10181, 0x0},
> + {0x101d0, 0x0},
> + {0x101d1, 0x0},
> + {0x1018c, 0x0},
> + {0x1018d, 0x0},
> + {0x100c0, 0x0},
> + {0x100c1, 0x0},
> + {0x101c0, 0x0},
> + {0x101c1, 0x0},
> + {0x102c0, 0x0},
> + {0x102c1, 0x0},
> + {0x103c0, 0x0},
> + {0x103c1, 0x0},
> + {0x104c0, 0x0},
> + {0x104c1, 0x0},
> + {0x105c0, 0x0},
> + {0x105c1, 0x0},
> + {0x106c0, 0x0},
> + {0x106c1, 0x0},
> + {0x107c0, 0x0},
> + {0x107c1, 0x0},
> + {0x108c0, 0x0},
> + {0x108c1, 0x0},
> + {0x100ae, 0x0},
> + {0x100af, 0x0},
> + {0x11020, 0x0},
> + {0x11080, 0x0},
> + {0x11081, 0x0},
> + {0x110d0, 0x0},
> + {0x110d1, 0x0},
> + {0x1108c, 0x0},
> + {0x1108d, 0x0},
> + {0x11180, 0x0},
> + {0x11181, 0x0},
> + {0x111d0, 0x0},
> + {0x111d1, 0x0},
> + {0x1118c, 0x0},
> + {0x1118d, 0x0},
> + {0x110c0, 0x0},
> + {0x110c1, 0x0},
> + {0x111c0, 0x0},
> + {0x111c1, 0x0},
> + {0x112c0, 0x0},
> + {0x112c1, 0x0},
> + {0x113c0, 0x0},
> + {0x113c1, 0x0},
> + {0x114c0, 0x0},
> + {0x114c1, 0x0},
> + {0x115c0, 0x0},
> + {0x115c1, 0x0},
> + {0x116c0, 0x0},
> + {0x116c1, 0x0},
> + {0x117c0, 0x0},
> + {0x117c1, 0x0},
> + {0x118c0, 0x0},
> + {0x118c1, 0x0},
> + {0x110ae, 0x0},
> + {0x110af, 0x0},
> + {0x90201, 0x0},
> + {0x90202, 0x0},
> + {0x90203, 0x0},
> + {0x90205, 0x0},
> + {0x90206, 0x0},
> + {0x90207, 0x0},
> + {0x90208, 0x0},
> + {0x20020, 0x0},
> + {0x20077, 0x0},
> + {0x20072, 0x0},
> + {0x20073, 0x0},
> + {0x400c0, 0x0},
> + {0x10040, 0x0},
> + {0x10140, 0x0},
> + {0x10240, 0x0},
> + {0x10340, 0x0},
> + {0x10440, 0x0},
> + {0x10540, 0x0},
> + {0x10640, 0x0},
> + {0x10740, 0x0},
> + {0x10840, 0x0},
> + {0x11040, 0x0},
> + {0x11140, 0x0},
> + {0x11240, 0x0},
> + {0x11340, 0x0},
> + {0x11440, 0x0},
> + {0x11540, 0x0},
> + {0x11640, 0x0},
> + {0x11740, 0x0},
> + {0x11840, 0x0},
> +
> +};
> +
> +/* P0 message block parameter for training firmware */
> +static struct dram_cfg_param ddr_fsp0_cfg[] = {
> + {0xd0000, 0x0},
> + {0x54003, 0xe94},
> + {0x54004, 0x4},
> + {0x54006, 0x15},
> + {0x54008, 0x131f},
> + {0x54009, 0xc8},
> + {0x5400b, 0x4},
> + {0x5400d, 0x100},
> + {0x5400f, 0x100},
> + {0x54012, 0x110},
> + {0x54019, 0x36e4},
> + {0x5401a, 0xf2},
> + {0x5401b, 0x1146},
> + {0x5401c, 0x1108},
> + {0x5401e, 0x4},
> + {0x5401f, 0x36e4},
> + {0x54020, 0xf2},
> + {0x54021, 0x1146},
> + {0x54022, 0x1108},
> + {0x54024, 0x4},
> + {0x54032, 0xe400},
> + {0x54033, 0xf236},
> + {0x54034, 0x4600},
> + {0x54035, 0x811},
> + {0x54036, 0x11},
> + {0x54037, 0x400},
> + {0x54038, 0xe400},
> + {0x54039, 0xf236},
> + {0x5403a, 0x4600},
> + {0x5403b, 0x811},
> + {0x5403c, 0x11},
> + {0x5403d, 0x400},
> + {0xd0000, 0x1}
> +};
> +
> +/* P0 2D message block parameter for training firmware */
> +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
> + {0xd0000, 0x0},
> + {0x54003, 0xe94},
> + {0x54004, 0x4},
> + {0x54006, 0x15},
> + {0x54008, 0x61},
> + {0x54009, 0xc8},
> + {0x5400b, 0x4},
> + {0x5400d, 0x100},
> + {0x5400f, 0x100},
> + {0x54010, 0x2080},
> + {0x54012, 0x110},
> + {0x54019, 0x36e4},
> + {0x5401a, 0xf2},
> + {0x5401b, 0x1146},
> + {0x5401c, 0x1108},
> + {0x5401e, 0x4},
> + {0x5401f, 0x36e4},
> + {0x54020, 0xf2},
> + {0x54021, 0x1146},
> + {0x54022, 0x1108},
> + {0x54024, 0x4},
> + {0x54032, 0xe400},
> + {0x54033, 0xf236},
> + {0x54034, 0x4600},
> + {0x54035, 0x811},
> + {0x54036, 0x11},
> + {0x54037, 0x400},
> + {0x54038, 0xe400},
> + {0x54039, 0xf236},
> + {0x5403a, 0x4600},
> + {0x5403b, 0x811},
> + {0x5403c, 0x11},
> + {0x5403d, 0x400},
> + {0xd0000, 0x1}
> +};
> +
> +/* DRAM PHY init engine image */
> +static struct dram_cfg_param ddr_phy_pie[] = {
> + {0xd0000, 0x0},
> + {0x90000, 0x10},
> + {0x90001, 0x400},
> + {0x90002, 0x10e},
> + {0x90003, 0x0},
> + {0x90004, 0x0},
> + {0x90005, 0x8},
> + {0x90029, 0xb},
> + {0x9002a, 0x480},
> + {0x9002b, 0x109},
> + {0x9002c, 0x8},
> + {0x9002d, 0x448},
> + {0x9002e, 0x139},
> + {0x9002f, 0x8},
> + {0x90030, 0x478},
> + {0x90031, 0x109},
> + {0x90032, 0x0},
> + {0x90033, 0xe8},
> + {0x90034, 0x109},
> + {0x90035, 0x2},
> + {0x90036, 0x10},
> + {0x90037, 0x139},
> + {0x90038, 0xb},
> + {0x90039, 0x7c0},
> + {0x9003a, 0x139},
> + {0x9003b, 0x44},
> + {0x9003c, 0x633},
> + {0x9003d, 0x159},
> + {0x9003e, 0x14f},
> + {0x9003f, 0x630},
> + {0x90040, 0x159},
> + {0x90041, 0x47},
> + {0x90042, 0x633},
> + {0x90043, 0x149},
> + {0x90044, 0x4f},
> + {0x90045, 0x633},
> + {0x90046, 0x179},
> + {0x90047, 0x8},
> + {0x90048, 0xe0},
> + {0x90049, 0x109},
> + {0x9004a, 0x0},
> + {0x9004b, 0x7c8},
> + {0x9004c, 0x109},
> + {0x9004d, 0x0},
> + {0x9004e, 0x1},
> + {0x9004f, 0x8},
> + {0x90050, 0x30},
> + {0x90051, 0x65a},
> + {0x90052, 0x9},
> + {0x90053, 0x0},
> + {0x90054, 0x45a},
> + {0x90055, 0x9},
> + {0x90056, 0x0},
> + {0x90057, 0x448},
> + {0x90058, 0x109},
> + {0x90059, 0x40},
> + {0x9005a, 0x633},
> + {0x9005b, 0x179},
> + {0x9005c, 0x1},
> + {0x9005d, 0x618},
> + {0x9005e, 0x109},
> + {0x9005f, 0x40c0},
> + {0x90060, 0x633},
> + {0x90061, 0x149},
> + {0x90062, 0x8},
> + {0x90063, 0x4},
> + {0x90064, 0x48},
> + {0x90065, 0x4040},
> + {0x90066, 0x633},
> + {0x90067, 0x149},
> + {0x90068, 0x0},
> + {0x90069, 0x4},
> + {0x9006a, 0x48},
> + {0x9006b, 0x40},
> + {0x9006c, 0x633},
> + {0x9006d, 0x149},
> + {0x9006e, 0x0},
> + {0x9006f, 0x658},
> + {0x90070, 0x109},
> + {0x90071, 0x10},
> + {0x90072, 0x4},
> + {0x90073, 0x18},
> + {0x90074, 0x0},
> + {0x90075, 0x4},
> + {0x90076, 0x78},
> + {0x90077, 0x549},
> + {0x90078, 0x633},
> + {0x90079, 0x159},
> + {0x9007a, 0xd49},
> + {0x9007b, 0x633},
> + {0x9007c, 0x159},
> + {0x9007d, 0x94a},
> + {0x9007e, 0x633},
> + {0x9007f, 0x159},
> + {0x90080, 0x441},
> + {0x90081, 0x633},
> + {0x90082, 0x149},
> + {0x90083, 0x42},
> + {0x90084, 0x633},
> + {0x90085, 0x149},
> + {0x90086, 0x1},
> + {0x90087, 0x633},
> + {0x90088, 0x149},
> + {0x90089, 0x0},
> + {0x9008a, 0xe0},
> + {0x9008b, 0x109},
> + {0x9008c, 0xa},
> + {0x9008d, 0x10},
> + {0x9008e, 0x109},
> + {0x9008f, 0x9},
> + {0x90090, 0x3c0},
> + {0x90091, 0x149},
> + {0x90092, 0x9},
> + {0x90093, 0x3c0},
> + {0x90094, 0x159},
> + {0x90095, 0x18},
> + {0x90096, 0x10},
> + {0x90097, 0x109},
> + {0x90098, 0x0},
> + {0x90099, 0x3c0},
> + {0x9009a, 0x109},
> + {0x9009b, 0x18},
> + {0x9009c, 0x4},
> + {0x9009d, 0x48},
> + {0x9009e, 0x18},
> + {0x9009f, 0x4},
> + {0x900a0, 0x58},
> + {0x900a1, 0xb},
> + {0x900a2, 0x10},
> + {0x900a3, 0x109},
> + {0x900a4, 0x1},
> + {0x900a5, 0x10},
> + {0x900a6, 0x109},
> + {0x900a7, 0x5},
> + {0x900a8, 0x7c0},
> + {0x900a9, 0x109},
> + {0x40000, 0x811},
> + {0x40020, 0x880},
> + {0x40040, 0x0},
> + {0x40060, 0x0},
> + {0x40001, 0x4008},
> + {0x40021, 0x83},
> + {0x40041, 0x4f},
> + {0x40061, 0x0},
> + {0x40002, 0x4040},
> + {0x40022, 0x83},
> + {0x40042, 0x51},
> + {0x40062, 0x0},
> + {0x40003, 0x811},
> + {0x40023, 0x880},
> + {0x40043, 0x0},
> + {0x40063, 0x0},
> + {0x40004, 0x720},
> + {0x40024, 0xf},
> + {0x40044, 0x1740},
> + {0x40064, 0x0},
> + {0x40005, 0x16},
> + {0x40025, 0x83},
> + {0x40045, 0x4b},
> + {0x40065, 0x0},
> + {0x40006, 0x716},
> + {0x40026, 0xf},
> + {0x40046, 0x2001},
> + {0x40066, 0x0},
> + {0x40007, 0x716},
> + {0x40027, 0xf},
> + {0x40047, 0x2800},
> + {0x40067, 0x0},
> + {0x40008, 0x716},
> + {0x40028, 0xf},
> + {0x40048, 0xf00},
> + {0x40068, 0x0},
> + {0x40009, 0x720},
> + {0x40029, 0xf},
> + {0x40049, 0x1400},
> + {0x40069, 0x0},
> + {0x4000a, 0xe08},
> + {0x4002a, 0xc15},
> + {0x4004a, 0x0},
> + {0x4006a, 0x0},
> + {0x4000b, 0x625},
> + {0x4002b, 0x15},
> + {0x4004b, 0x0},
> + {0x4006b, 0x0},
> + {0x4000c, 0x4028},
> + {0x4002c, 0x80},
> + {0x4004c, 0x0},
> + {0x4006c, 0x0},
> + {0x4000d, 0xe08},
> + {0x4002d, 0xc1a},
> + {0x4004d, 0x0},
> + {0x4006d, 0x0},
> + {0x4000e, 0x625},
> + {0x4002e, 0x1a},
> + {0x4004e, 0x0},
> + {0x4006e, 0x0},
> + {0x4000f, 0x4040},
> + {0x4002f, 0x80},
> + {0x4004f, 0x0},
> + {0x4006f, 0x0},
> + {0x40010, 0x2604},
> + {0x40030, 0x15},
> + {0x40050, 0x0},
> + {0x40070, 0x0},
> + {0x40011, 0x708},
> + {0x40031, 0x5},
> + {0x40051, 0x0},
> + {0x40071, 0x2002},
> + {0x40012, 0x8},
> + {0x40032, 0x80},
> + {0x40052, 0x0},
> + {0x40072, 0x0},
> + {0x40013, 0x2604},
> + {0x40033, 0x1a},
> + {0x40053, 0x0},
> + {0x40073, 0x0},
> + {0x40014, 0x708},
> + {0x40034, 0xa},
> + {0x40054, 0x0},
> + {0x40074, 0x2002},
> + {0x40015, 0x4040},
> + {0x40035, 0x80},
> + {0x40055, 0x0},
> + {0x40075, 0x0},
> + {0x40016, 0x60a},
> + {0x40036, 0x15},
> + {0x40056, 0x1200},
> + {0x40076, 0x0},
> + {0x40017, 0x61a},
> + {0x40037, 0x15},
> + {0x40057, 0x1300},
> + {0x40077, 0x0},
> + {0x40018, 0x60a},
> + {0x40038, 0x1a},
> + {0x40058, 0x1200},
> + {0x40078, 0x0},
> + {0x40019, 0x642},
> + {0x40039, 0x1a},
> + {0x40059, 0x1300},
> + {0x40079, 0x0},
> + {0x4001a, 0x4808},
> + {0x4003a, 0x880},
> + {0x4005a, 0x0},
> + {0x4007a, 0x0},
> + {0x900aa, 0x0},
> + {0x900ab, 0x790},
> + {0x900ac, 0x11a},
> + {0x900ad, 0x8},
> + {0x900ae, 0x7aa},
> + {0x900af, 0x2a},
> + {0x900b0, 0x10},
> + {0x900b1, 0x7b2},
> + {0x900b2, 0x2a},
> + {0x900b3, 0x0},
> + {0x900b4, 0x7c8},
> + {0x900b5, 0x109},
> + {0x900b6, 0x10},
> + {0x900b7, 0x10},
> + {0x900b8, 0x109},
> + {0x900b9, 0x10},
> + {0x900ba, 0x2a8},
> + {0x900bb, 0x129},
> + {0x900bc, 0x8},
> + {0x900bd, 0x370},
> + {0x900be, 0x129},
> + {0x900bf, 0xa},
> + {0x900c0, 0x3c8},
> + {0x900c1, 0x1a9},
> + {0x900c2, 0xc},
> + {0x900c3, 0x408},
> + {0x900c4, 0x199},
> + {0x900c5, 0x14},
> + {0x900c6, 0x790},
> + {0x900c7, 0x11a},
> + {0x900c8, 0x8},
> + {0x900c9, 0x4},
> + {0x900ca, 0x18},
> + {0x900cb, 0xe},
> + {0x900cc, 0x408},
> + {0x900cd, 0x199},
> + {0x900ce, 0x8},
> + {0x900cf, 0x8568},
> + {0x900d0, 0x108},
> + {0x900d1, 0x18},
> + {0x900d2, 0x790},
> + {0x900d3, 0x16a},
> + {0x900d4, 0x8},
> + {0x900d5, 0x1d8},
> + {0x900d6, 0x169},
> + {0x900d7, 0x10},
> + {0x900d8, 0x8558},
> + {0x900d9, 0x168},
> + {0x900da, 0x1ff8},
> + {0x900db, 0x85a8},
> + {0x900dc, 0x1e8},
> + {0x900dd, 0x50},
> + {0x900de, 0x798},
> + {0x900df, 0x16a},
> + {0x900e0, 0x60},
> + {0x900e1, 0x7a0},
> + {0x900e2, 0x16a},
> + {0x900e3, 0x8},
> + {0x900e4, 0x8310},
> + {0x900e5, 0x168},
> + {0x900e6, 0x8},
> + {0x900e7, 0xa310},
> + {0x900e8, 0x168},
> + {0x900e9, 0xa},
> + {0x900ea, 0x408},
> + {0x900eb, 0x169},
> + {0x900ec, 0x6e},
> + {0x900ed, 0x0},
> + {0x900ee, 0x68},
> + {0x900ef, 0x0},
> + {0x900f0, 0x408},
> + {0x900f1, 0x169},
> + {0x900f2, 0x0},
> + {0x900f3, 0x8310},
> + {0x900f4, 0x168},
> + {0x900f5, 0x0},
> + {0x900f6, 0xa310},
> + {0x900f7, 0x168},
> + {0x900f8, 0x1ff8},
> + {0x900f9, 0x85a8},
> + {0x900fa, 0x1e8},
> + {0x900fb, 0x68},
> + {0x900fc, 0x798},
> + {0x900fd, 0x16a},
> + {0x900fe, 0x78},
> + {0x900ff, 0x7a0},
> + {0x90100, 0x16a},
> + {0x90101, 0x68},
> + {0x90102, 0x790},
> + {0x90103, 0x16a},
> + {0x90104, 0x8},
> + {0x90105, 0x8b10},
> + {0x90106, 0x168},
> + {0x90107, 0x8},
> + {0x90108, 0xab10},
> + {0x90109, 0x168},
> + {0x9010a, 0xa},
> + {0x9010b, 0x408},
> + {0x9010c, 0x169},
> + {0x9010d, 0x58},
> + {0x9010e, 0x0},
> + {0x9010f, 0x68},
> + {0x90110, 0x0},
> + {0x90111, 0x408},
> + {0x90112, 0x169},
> + {0x90113, 0x0},
> + {0x90114, 0x8b10},
> + {0x90115, 0x168},
> + {0x90116, 0x1},
> + {0x90117, 0xab10},
> + {0x90118, 0x168},
> + {0x90119, 0x0},
> + {0x9011a, 0x1d8},
> + {0x9011b, 0x169},
> + {0x9011c, 0x80},
> + {0x9011d, 0x790},
> + {0x9011e, 0x16a},
> + {0x9011f, 0x18},
> + {0x90120, 0x7aa},
> + {0x90121, 0x6a},
> + {0x90122, 0xa},
> + {0x90123, 0x0},
> + {0x90124, 0x1e9},
> + {0x90125, 0x8},
> + {0x90126, 0x8080},
> + {0x90127, 0x108},
> + {0x90128, 0xf},
> + {0x90129, 0x408},
> + {0x9012a, 0x169},
> + {0x9012b, 0xc},
> + {0x9012c, 0x0},
> + {0x9012d, 0x68},
> + {0x9012e, 0x9},
> + {0x9012f, 0x0},
> + {0x90130, 0x1a9},
> + {0x90131, 0x0},
> + {0x90132, 0x408},
> + {0x90133, 0x169},
> + {0x90134, 0x0},
> + {0x90135, 0x8080},
> + {0x90136, 0x108},
> + {0x90137, 0x8},
> + {0x90138, 0x7aa},
> + {0x90139, 0x6a},
> + {0x9013a, 0x0},
> + {0x9013b, 0x8568},
> + {0x9013c, 0x108},
> + {0x9013d, 0xb7},
> + {0x9013e, 0x790},
> + {0x9013f, 0x16a},
> + {0x90140, 0x1f},
> + {0x90141, 0x0},
> + {0x90142, 0x68},
> + {0x90143, 0x8},
> + {0x90144, 0x8558},
> + {0x90145, 0x168},
> + {0x90146, 0xf},
> + {0x90147, 0x408},
> + {0x90148, 0x169},
> + {0x90149, 0xd},
> + {0x9014a, 0x0},
> + {0x9014b, 0x68},
> + {0x9014c, 0x0},
> + {0x9014d, 0x408},
> + {0x9014e, 0x169},
> + {0x9014f, 0x0},
> + {0x90150, 0x8558},
> + {0x90151, 0x168},
> + {0x90152, 0x8},
> + {0x90153, 0x3c8},
> + {0x90154, 0x1a9},
> + {0x90155, 0x3},
> + {0x90156, 0x370},
> + {0x90157, 0x129},
> + {0x90158, 0x20},
> + {0x90159, 0x2aa},
> + {0x9015a, 0x9},
> + {0x9015b, 0x8},
> + {0x9015c, 0xe8},
> + {0x9015d, 0x109},
> + {0x9015e, 0x0},
> + {0x9015f, 0x8140},
> + {0x90160, 0x10c},
> + {0x90161, 0x10},
> + {0x90162, 0x8138},
> + {0x90163, 0x104},
> + {0x90164, 0x8},
> + {0x90165, 0x448},
> + {0x90166, 0x109},
> + {0x90167, 0xf},
> + {0x90168, 0x7c0},
> + {0x90169, 0x109},
> + {0x9016a, 0x0},
> + {0x9016b, 0xe8},
> + {0x9016c, 0x109},
> + {0x9016d, 0x47},
> + {0x9016e, 0x630},
> + {0x9016f, 0x109},
> + {0x90170, 0x8},
> + {0x90171, 0x618},
> + {0x90172, 0x109},
> + {0x90173, 0x8},
> + {0x90174, 0xe0},
> + {0x90175, 0x109},
> + {0x90176, 0x0},
> + {0x90177, 0x7c8},
> + {0x90178, 0x109},
> + {0x90179, 0x8},
> + {0x9017a, 0x8140},
> + {0x9017b, 0x10c},
> + {0x9017c, 0x0},
> + {0x9017d, 0x478},
> + {0x9017e, 0x109},
> + {0x9017f, 0x0},
> + {0x90180, 0x1},
> + {0x90181, 0x8},
> + {0x90182, 0x8},
> + {0x90183, 0x4},
> + {0x90184, 0x0},
> + {0x90006, 0x8},
> + {0x90007, 0x7c8},
> + {0x90008, 0x109},
> + {0x90009, 0x0},
> + {0x9000a, 0x400},
> + {0x9000b, 0x106},
> + {0xd00e7, 0x400},
> + {0x90017, 0x0},
> + {0x9001f, 0x2b},
> + {0x90026, 0x69},
> + {0x400d0, 0x0},
> + {0x400d1, 0x101},
> + {0x400d2, 0x105},
> + {0x400d3, 0x107},
> + {0x400d4, 0x10f},
> + {0x400d5, 0x202},
> + {0x400d6, 0x20a},
> + {0x400d7, 0x20b},
> + {0x2003a, 0x2},
> + {0x200be, 0x3},
> + {0x2000b, 0x75},
> + {0x2000c, 0xe9},
> + {0x2000d, 0x91c},
> + {0x2000e, 0x2c},
> + {0x9000c, 0x0},
> + {0x9000d, 0x173},
> + {0x9000e, 0x60},
> + {0x9000f, 0x6110},
> + {0x90010, 0x2152},
> + {0x90011, 0xdfbd},
> + {0x90012, 0x2060},
> + {0x90013, 0x6152},
> + {0x20010, 0x5a},
> + {0x20011, 0x3},
> + {0x40080, 0xe0},
> + {0x40081, 0x12},
> + {0x40082, 0xe0},
> + {0x40083, 0x12},
> + {0x40084, 0xe0},
> + {0x40085, 0x12},
> + {0x400fd, 0xf},
> + {0x400f1, 0xe},
> + {0x10011, 0x1},
> + {0x10012, 0x1},
> + {0x10013, 0x180},
> + {0x10018, 0x1},
> + {0x10002, 0x6209},
> + {0x100b2, 0x1},
> + {0x101b4, 0x1},
> + {0x102b4, 0x1},
> + {0x103b4, 0x1},
> + {0x104b4, 0x1},
> + {0x105b4, 0x1},
> + {0x106b4, 0x1},
> + {0x107b4, 0x1},
> + {0x108b4, 0x1},
> + {0x11011, 0x1},
> + {0x11012, 0x1},
> + {0x11013, 0x180},
> + {0x11018, 0x1},
> + {0x11002, 0x6209},
> + {0x110b2, 0x1},
> + {0x111b4, 0x1},
> + {0x112b4, 0x1},
> + {0x113b4, 0x1},
> + {0x114b4, 0x1},
> + {0x115b4, 0x1},
> + {0x116b4, 0x1},
> + {0x117b4, 0x1},
> + {0x118b4, 0x1},
> + {0x20089, 0x1},
> + {0x20088, 0x19},
> + {0xc0080, 0x0},
> + {0xd0000, 0x1},
> +
> +};
> +
> +static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
> + {
> + /* P0 3733mts 1D */
> + .drate = 3733,
> + .fw_type = FW_1D_IMAGE,
> + .fsp_cfg = ddr_fsp0_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
> +
> + },
> +
> + {
> + /* P0 3733mts 2D */
> + .drate = 3733,
> + .fw_type = FW_2D_IMAGE,
> + .fsp_cfg = ddr_fsp0_2d_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
> + },
> +
> +};
> +
> +/* ddr timing config params */
> +struct dram_timing_info dram_timing = {
> + .ddrc_cfg = ddr_ddrc_cfg,
> + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
> + .ddrphy_cfg = ddr_ddrphy_cfg,
> + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
> + .fsp_msg = ddr_dram_fsp_msg,
> + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
> + .ddrphy_trained_csr = ddr_ddrphy_trained_csr,
> + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
> + .ddrphy_pie = ddr_phy_pie,
> + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
> + .fsp_table = { 3733, },
> + .fsp_cfg = ddr_dram_fsp_cfg,
> + .fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
> +};
> diff --git a/board/phytec/phycore_imx93/phycore-imx93.c
> b/board/phytec/phycore_imx93/phycore-imx93.c
> new file mode 100644
> index 00000000000..085c8e195a6
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/phycore-imx93.c
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Christoph Stoidner <c.stoidner at phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> + */
> +
> +#include <asm/arch-imx9/ccm_regs.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch-imx9/imx93_pins.h>
> +#include <asm/arch/clock.h>
> +#include <asm/global_data.h>
> +#include <asm/mach-imx/boot_mode.h>
> +#include <env.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int board_init(void)
> +{
> + return 0;
> +}
> +
> +int board_mmc_get_env_dev(int devno)
> +{
> + return devno;
> +}
> +
> +int board_late_init(void)
> +{
> + switch (get_boot_device()) {
> + case SD2_BOOT:
> + env_set_ulong("mmcdev", 1);
> + break;
> + case MMC1_BOOT:
> + env_set_ulong("mmcdev", 0);
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> diff --git a/board/phytec/phycore_imx93/phycore_imx93.env
> b/board/phytec/phycore_imx93/phycore_imx93.env
> new file mode 100644
> index 00000000000..27bfadfa140
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/phycore_imx93.env
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +
> +image=Image
> +console=ttyLP0
> +fdt_addr=0x83000000
> +fdto_addr=0x830c0000
> +bootenv_addr=0x83500000
> +fdt_file=CONFIG_DEFAULT_FDT_FILE
> +ip_dyn=yes
> +bootenv=bootenv.txt
> +mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr}
> ${bootenv}
> +mmcdev=CONFIG_SYS_MMC_ENV_DEV
> +mmcpart=1
> +mmcroot=2
> +mmcautodetect=yes
> +mmcargs=setenv bootargs console=${console},${baudrate} earlycon
> + root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
> +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
> +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
> +mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr}
> ${overlay}
> +mmc_apply_overlays=
> + fdt address ${fdt_addr};
> + for overlay in ${overlays};
> + do;
> + if run mmc_load_overlay; then
> + fdt resize ${filesize};
> + fdt apply ${fdto_addr};
> + fi;
> + done;
> +mmcboot=
> + echo Booting from mmc ...;
> + if run mmc_load_bootenv; then
> + env import -t ${bootenv_addr} ${filesize};
> + fi;
> + run mmcargs;
> + if run loadfdt; then
> + run mmc_apply_overlays;
> + booti ${loadaddr} - ${fdt_addr};
> + else
> + echo WARN: Cannot load the DT;
> + fi;
> +nfsroot=/nfs
> +netargs=setenv bootargs console=${console},${baudrate} earlycon
> + root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
> +net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
> +net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
> +net_apply_overlays=
> + fdt address ${fdt_addr};
> + for overlay in ${overlays};
> + do;
> + if run net_load_overlay; then
> + fdt resize ${filesize};
> + fdt apply ${fdto_addr};
> + fi;
> + done;
> +netboot=
> + echo Booting from net ...;
> + run netargs;
> + if test ${ip_dyn} = yes; then
> + setenv get_cmd dhcp;
> + else
> + setenv get_cmd tftp;
> + fi;
> + if run net_load_bootenv; then
> + env import -t ${bootenv_addr} ${filesize};
> + fi;
> + ${get_cmd} ${loadaddr} ${image};
> + if ${get_cmd} ${fdt_addr} ${fdt_file}; then
> + run net_apply_overlays;
> + booti ${loadaddr} - ${fdt_addr};
> + else
> + echo WARN: Cannot load the DT;
> + fi;
> diff --git a/board/phytec/phycore_imx93/spl.c
> b/board/phytec/phycore_imx93/spl.c
> new file mode 100644
> index 00000000000..da4b9e53594
> --- /dev/null
> +++ b/board/phytec/phycore_imx93/spl.c
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Author: Christoph Stoidner <c.stoidner at phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> + */
> +
> +#include <asm/arch/clock.h>
> +#include <asm/arch/ddr.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/arch/trdc.h>
> +#include <asm/mach-imx/boot_mode.h>
> +#include <asm/sections.h>
> +#include <hang.h>
> +#include <init.h>
> +#include <log.h>
> +#include <power/pmic.h>
> +#include <power/pca9450.h>
> +#include <spl.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Will be part of drivers/power/regulator/pca9450.c
> + * when pca9451a support is added.
> + */
> +#define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5)
> +
> +int spl_board_boot_device(enum boot_device boot_dev_spl)
> +{
> + return BOOT_DEVICE_BOOTROM;
> +}
> +
> +void spl_board_init(void)
> +{
> + puts("Normal Boot\n");
> +}
> +
> +void spl_dram_init(void)
> +{
> + ddr_init(&dram_timing);
> +}
> +
> +int power_init_board(void)
> +{
> + struct udevice *dev;
> + int ret;
> + unsigned int val = 0;
> +
> + ret = pmic_get("pmic at 25", &dev);
> + if (ret == -ENODEV) {
> + puts("No pca9450 at 25\n");
> + return 0;
> + }
> +
> + if (ret != 0)
> + return ret;
> +
> + /* BUCKxOUT_DVS0/1 control BUCK123 output */
> + pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
> +
> + /* enable DVS control through PMIC_STBY_REQ */
> + pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
> +
> + ret = pmic_reg_read(dev, PCA9450_PWR_CTRL);
> + if (ret < 0)
> + return ret;
> + val = ret;
> +
> + if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) {
> + /* 0.8v for Low drive mode */
> + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0,
> 0x0c);
> + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0,
> 0x0c);
> + } else {
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0,
> 0x10);
> + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0,
> 0x10);
> + }
> + } else {
> + /* 0.9v for Over drive mode */
> + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0,
> 0x14);
> + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0,
> 0x14);
> + } else {
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0,
> 0x18);
> + pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0,
> 0x18);
> + }
> + }
> +
> + /* set standby voltage to 0.65v */
> + if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
> + else
> + pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
> +
> + /* I2C_LT_EN*/
> + pmic_reg_write(dev, 0xa, 0x3);
> +
> + return 0;
> +}
> +
> +extern int imx9_probe_mu(void *ctx, struct event *event);
> +void board_init_f(ulong dummy)
> +{
> + int ret;
> +
> + /* Clear the BSS. */
> + memset(__bss_start, 0, __bss_end - __bss_start);
> +
> + timer_init();
> +
> + arch_cpu_init();
> +
> + spl_early_init();
> +
> + preloader_console_init();
> +
> + ret = imx9_probe_mu(NULL, NULL);
> + if (ret) {
> + printf("Fail to init ELE API\n");
> + } else {
> + printf("SOC: 0x%x\n", gd->arch.soc_rev);
> + printf("LC: 0x%x\n", gd->arch.lifecycle);
> + }
> +
> + clock_init();
> +
> + power_init_board();
> +
> + if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
> + set_arm_core_max_clk();
> +
> + /* Init power of mix */
> + soc_power_init();
> +
> + /* Setup TRDC for DDR access */
> + trdc_init();
> +
> + /* DDR initialization */
> + spl_dram_init();
> +
> + /* Put M33 into CPUWAIT for following kick */
> + ret = m33_prepare();
> + if (!ret)
> + printf("M33 prepare ok\n");
> +
> + board_init_r(NULL, 0);
> +}
> diff --git a/configs/imx93-phyboard-segin_defconfig b/configs/imx93-
> phyboard-segin_defconfig
> new file mode 100644
> index 00000000000..91a24c3456d
> --- /dev/null
> +++ b/configs/imx93-phyboard-segin_defconfig
> @@ -0,0 +1,138 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_IMX9=y
> +CONFIG_TEXT_BASE=0x80200000
> +CONFIG_SYS_MALLOC_LEN=0x2000000
> +CONFIG_SYS_MALLOC_F_LEN=0x20000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_ENV_SOURCE_FILE="phycore_imx93"
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x700000
> +CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
> +CONFIG_DM_GPIO=y
> +CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin"
> +CONFIG_SPL_TEXT_BASE=0x2049A000
> +CONFIG_AHAB_BOOT=y
> +CONFIG_TARGET_PHYCORE_IMX93=y
> +CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_SYS_MONITOR_LEN=524288
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
> +CONFIG_SPL_STACK=0x20519dd0
> +CONFIG_SPL=y
> +CONFIG_ENV_OFFSET_REDUND=0x720000
> +CONFIG_CMD_DEKBLOB=y
> +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
> +CONFIG_SYS_LOAD_ADDR=0x80400000
> +CONFIG_SYS_MEMTEST_START=0x80000000
> +CONFIG_SYS_MEMTEST_END=0x90000000
> +CONFIG_REMAKE_ELF=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_OF_SYSTEM_SETUP=y
> +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run
> loadimage; then run mmcboot; else run netboot; fi; fi;"
> +CONFIG_DEFAULT_FDT_FILE="oftree"
> +CONFIG_SYS_CBSIZE=2048
> +CONFIG_SYS_PBSIZE=2074
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_SPL_MAX_SIZE=0x26000
> +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> +CONFIG_SPL_BSS_START_ADDR=0x2051a000
> +CONFIG_SPL_BSS_MAX_SIZE=0x2000
> +CONFIG_SPL_BOARD_INIT=y
> +CONFIG_SPL_BOOTROM_SUPPORT=y
> +CONFIG_SPL_LOAD_IMX_CONTAINER=y
> +CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
> +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
> +CONFIG_SPL_I2C=y
> +CONFIG_SPL_POWER=y
> +CONFIG_SPL_WATCHDOG=y
> +CONFIG_SYS_PROMPT="u-boot=> "
> +CONFIG_SYS_MAXARGS=64
> +CONFIG_CMD_ERASEENV=y
> +CONFIG_CMD_NVEDIT_EFI=y
> +CONFIG_CRC32_VERIFY=y
> +CONFIG_CMD_EEPROM=y
> +CONFIG_SYS_I2C_EEPROM_BUS=2
> +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
> +CONFIG_SYS_EEPROM_SIZE=4096
> +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
> +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_FUSE=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_POWEROFF=y
> +CONFIG_CMD_SNTP=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_EFIDEBUG=y
> +CONFIG_CMD_RTC=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_GETTIME=y
> +CONFIG_CMD_TIMER=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_HASH=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_NOWHERE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SYS_MMC_ENV_DEV=1
> +CONFIG_USE_ETHPRIME=y
> +CONFIG_ETHPRIME="eth1"
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_CLK_IMX93=y
> +CONFIG_CLK_IMX93=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_GPIO_HOG=y
> +CONFIG_IMX_RGPIO2P=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_IMX_LPI2C=y
> +CONFIG_I2C_EEPROM=y
> +CONFIG_SYS_I2C_EEPROM_ADDR=0x50
> +CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_FSL_USDHC=y
> +CONFIG_PHY_TI_GENERIC=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_DWC_ETH_QOS_IMX=y
> +CONFIG_FEC_MXC=y
> +CONFIG_MII=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_IMX93=y
> +CONFIG_POWER_DOMAIN=y
> +CONFIG_DM_PMIC=y
> +CONFIG_DM_PMIC_PCA9450=y
> +CONFIG_SPL_DM_PMIC_PCA9450=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_PCA9450=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_DM_RTC=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_FSL_LPUART=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_SPL_SYSRESET=y
> +CONFIG_SYSRESET_WATCHDOG=y
> +CONFIG_DM_THERMAL=y
> +CONFIG_IMX_TMU=y
> +CONFIG_ULP_WATCHDOG=y
> +CONFIG_LZO=y
> +CONFIG_BZIP2=y
> diff --git a/doc/board/phytec/imx93-phyboard-segin.rst
> b/doc/board/phytec/imx93-phyboard-segin.rst
> new file mode 100644
> index 00000000000..da8772ecd5c
> --- /dev/null
> +++ b/doc/board/phytec/imx93-phyboard-segin.rst
> @@ -0,0 +1,61 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +phyBOARD-Segin-i.MX93
> +=====================
> +
> +U-Boot for the phyBOARD-Segin-i.MX93.
> +
> +Quick Start
> +-----------
> +
> +- Get and Build the ARM Trusted firmware
> +- Get the DDR firmware
> +- Get ahab-container.img
> +- Build U-Boot
> +
> +Get and Build the ARM Trusted firmware
> +--------------------------------------
> +
> +Note: srctree is U-Boot source directory
> +Get ATF from: https://github.com/nxp-imx/imx-atf/
> +branch: lf_v2.8
> +
> +.. code-block:: bash
> +
> + $ unset LDFLAGS
> + $ make PLAT=imx93 bl31
> + $ cp build/imx93/release/bl31.bin $(srctree)
> +
> +Get the DDR firmware
> +--------------------
> +
> +.. code-block:: bash
> +
> + $ wget
> https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
> + $ chmod +x firmware-imx-8.21.bin
> + $ ./firmware-imx-8.21.bin
> + $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin
> $(srctree)
> +
> +Get ahab-container.img
> +---------------------------------------
> +
> +.. code-block:: bash
> +
> + $ wget
> https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
> + $ chmod +x firmware-sentinel-0.10.bin
> + $ ./firmware-sentinel-0.10.bin
> + $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
> +
> +Build U-Boot
> +------------
> +
> +.. code-block:: bash
> +
> + $ make imx93-phyboard-segin_defconfig
> + $ make
> +
> +Burn the flash.bin to MicroSD card offset 32KB:
> +
> +.. code-block:: bash
> +
> + $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
> diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
> index 965d40de4d4..fea0b076202 100644
> --- a/doc/board/phytec/index.rst
> +++ b/doc/board/phytec/index.rst
> @@ -7,6 +7,7 @@ PHYTEC
> :maxdepth: 2
>
> imx8mm-phygate-tauri-l
> + imx93-phyboard-segin
> phycore-am62x
> phycore-imx8mm
> phycore-imx8mp
> diff --git a/include/configs/phycore_imx93.h
> b/include/configs/phycore_imx93.h
> new file mode 100644
> index 00000000000..07364dff403
> --- /dev/null
> +++ b/include/configs/phycore_imx93.h
> @@ -0,0 +1,28 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2022 NXP
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner at phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
> + */
> +
> +#ifndef __PHYCORE_IMX93_H
> +#define __PHYCORE_IMX93_H
> +
> +#include <linux/sizes.h>
> +#include <asm/arch/imx-regs.h>
> +
> +#define CFG_SYS_UBOOT_BASE \
> + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR *
> 512)
> +
> +#define CFG_SYS_INIT_RAM_ADDR 0x80000000
> +#define CFG_SYS_INIT_RAM_SIZE 0x200000
> +
> +#define CFG_SYS_SDRAM_BASE 0x80000000
> +#define PHYS_SDRAM 0x80000000
> +#define PHYS_SDRAM_SIZE 0x80000000
> +
> +/* Using ULP WDOG for reset */
> +#define WDOG_BASE_ADDR WDG3_BASE_ADDR
> +
> +#endif /* __PHYCORE_IMX93_H */
More information about the U-Boot
mailing list