[PATCH v2 27/39] efi_loader: Rename and move CMD_BOOTEFI_HELLO_COMPILE
Simon Glass
sjg at chromium.org
Tue Aug 6 14:58:38 CEST 2024
This is not actually a command so the name is confusing. Use
BOOTEFI_HELLO_COMPILE instead. Put it in the efi_loader directory
with the other such config options.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
arch/arm/lib/Makefile | 2 +-
arch/riscv/lib/Makefile | 2 +-
arch/x86/lib/Makefile | 2 +-
cmd/Kconfig | 14 +-------------
configs/octeontx2_95xx_defconfig | 2 +-
configs/octeontx2_96xx_defconfig | 2 +-
configs/octeontx_81xx_defconfig | 2 +-
configs/octeontx_83xx_defconfig | 2 +-
doc/develop/uefi/uefi.rst | 2 +-
lib/efi_loader/Kconfig | 12 ++++++++++++
lib/efi_loader/Makefile | 2 +-
test/py/tests/test_efi_fit.py | 2 +-
test/py/tests/test_efi_loader.py | 2 +-
13 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 67275fba616..406797f998c 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -130,7 +130,7 @@ CFLAGS_REMOVE_$(EFI_CRT0) := $(CFLAGS_NON_EFI)
CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI)
CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
-extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
+extra-$(CONFIG_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
# TODO: As of v2019.01 the relocation code for the EFI application cannot
# be built on ARMv7-M.
ifndef CONFIG_CPU_V7M
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 65dc49f6fa5..3bd90c7a354 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -36,7 +36,7 @@ CFLAGS_REMOVE_$(EFI_CRT0) := $(CFLAGS_NON_EFI)
CFLAGS_$(EFI_RELOC) := $(CFLAGS_EFI)
CFLAGS_REMOVE_$(EFI_RELOC) := $(CFLAGS_NON_EFI)
-extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
+extra-$(CONFIG_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC)
extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 8fc35e1b51e..70dccd7f983 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -97,7 +97,7 @@ endif
else
ifndef CONFIG_SPL_BUILD
-ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),)
+ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST)$(CONFIG_BOOTEFI_HELLO_COMPILE),)
extra-y += $(EFI_CRT0) $(EFI_RELOC)
endif
endif
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 978f44eda42..fcf6bb73f88 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -431,21 +431,9 @@ config CMD_BOOTEFI_BOOTMGR
This subcommand will allow you to select the UEFI binary to be booted
via UEFI variables Boot####, BootOrder, and BootNext.
-config CMD_BOOTEFI_HELLO_COMPILE
- bool "Compile a standard EFI hello world binary for testing"
- default y
- help
- This compiles a standard EFI hello world application with U-Boot so
- that it can be used with the test/py testing framework. This is useful
- for testing that EFI is working at a basic level, and for bringing
- up EFI support on a new architecture.
-
- No additional space will be required in the resulting U-Boot binary
- when this option is enabled.
-
config CMD_BOOTEFI_HELLO
bool "Allow booting a standard EFI hello world for testing"
- depends on CMD_BOOTEFI_BINARY && CMD_BOOTEFI_HELLO_COMPILE
+ depends on CMD_BOOTEFI_BINARY && BOOTEFI_HELLO_COMPILE
default y if CMD_BOOTEFI_SELFTEST
help
This adds a standard EFI hello world application to U-Boot so that
diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig
index c5dc4f4dfa6..23c313375ac 100644
--- a/configs/octeontx2_95xx_defconfig
+++ b/configs/octeontx2_95xx_defconfig
@@ -38,7 +38,7 @@ CONFIG_SYS_PBSIZE=1050
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Marvell> "
-# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+# CONFIG_BOOTEFI_HELLO_COMPILE is not set
CONFIG_CMD_MD5SUM=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_CMD_MX_CYCLIC=y
diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig
index ad61b80300f..197e72acd1f 100644
--- a/configs/octeontx2_96xx_defconfig
+++ b/configs/octeontx2_96xx_defconfig
@@ -38,7 +38,7 @@ CONFIG_SYS_PBSIZE=1050
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Marvell> "
-# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+# CONFIG_BOOTEFI_HELLO_COMPILE is not set
CONFIG_CMD_MD5SUM=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_CMD_MX_CYCLIC=y
diff --git a/configs/octeontx_81xx_defconfig b/configs/octeontx_81xx_defconfig
index 1d39bce6abd..b501d653c27 100644
--- a/configs/octeontx_81xx_defconfig
+++ b/configs/octeontx_81xx_defconfig
@@ -39,7 +39,7 @@ CONFIG_SYS_PBSIZE=1050
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Marvell> "
-# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+# CONFIG_BOOTEFI_HELLO_COMPILE is not set
CONFIG_CMD_MD5SUM=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_CMD_MX_CYCLIC=y
diff --git a/configs/octeontx_83xx_defconfig b/configs/octeontx_83xx_defconfig
index ba9fc5f9553..4a537f5cbbe 100644
--- a/configs/octeontx_83xx_defconfig
+++ b/configs/octeontx_83xx_defconfig
@@ -37,7 +37,7 @@ CONFIG_SYS_PBSIZE=1050
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Marvell> "
-# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
+# CONFIG_BOOTEFI_HELLO_COMPILE is not set
CONFIG_CMD_MD5SUM=y
CONFIG_MD5SUM_VERIFY=y
CONFIG_CMD_MX_CYCLIC=y
diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst
index d450b12bf80..9aeee23a32e 100644
--- a/doc/develop/uefi/uefi.rst
+++ b/doc/develop/uefi/uefi.rst
@@ -693,7 +693,7 @@ Executing the built in hello world application
A hello world UEFI application can be built with::
- CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
+ CONFIG_BOOTEFI_HELLO_COMPILE=y
It can be embedded into the U-Boot binary with::
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 1179c31bb13..ab2c1c44364 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -516,4 +516,16 @@ config EFI_HTTP_BOOT
Enabling this option adds EFI HTTP Boot support. It allows to
directly boot from network.
+config BOOTEFI_HELLO_COMPILE
+ bool "Compile a standard EFI hello world binary for testing"
+ default y
+ help
+ This compiles a standard EFI hello world application with U-Boot so
+ that it can be used with the test/py testing framework. This is useful
+ for testing that EFI is working at a basic level, and for bringing
+ up EFI support on a new architecture.
+
+ No additional space will be required in the resulting U-Boot binary
+ when this option is enabled.
+
endif
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index 2af6f2066b5..27dbd9e760d 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -27,7 +27,7 @@ always += boothart.efi
targets += boothart.o
endif
-ifneq ($(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),)
+ifneq ($(CONFIG_BOOTEFI_HELLO_COMPILE),)
always += helloworld.efi
targets += helloworld.o
endif
diff --git a/test/py/tests/test_efi_fit.py b/test/py/tests/test_efi_fit.py
index 0ad483500f8..550058a30fd 100644
--- a/test/py/tests/test_efi_fit.py
+++ b/test/py/tests/test_efi_fit.py
@@ -119,7 +119,7 @@ FDT_DATA = '''
'''
@pytest.mark.buildconfigspec('bootm_efi')
- at pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
+ at pytest.mark.buildconfigspec('BOOTEFI_HELLO_COMPILE')
@pytest.mark.buildconfigspec('fit')
@pytest.mark.notbuildconfigspec('generate_acpi_table')
@pytest.mark.requiredtool('dtc')
diff --git a/test/py/tests/test_efi_loader.py b/test/py/tests/test_efi_loader.py
index 85473a9049b..ef1f1f1afb3 100644
--- a/test/py/tests/test_efi_loader.py
+++ b/test/py/tests/test_efi_loader.py
@@ -148,7 +148,7 @@ def fetch_tftp_file(u_boot_console, env_conf):
return addr
@pytest.mark.buildconfigspec('of_control')
- at pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
+ at pytest.mark.buildconfigspec('BOOTEFI_HELLO_COMPILE')
def test_efi_helloworld_net(u_boot_console):
"""Run the helloworld.efi binary via TFTP.
--
2.34.1
More information about the U-Boot
mailing list