[PATCH v4 05/14] mmc: Use logging instead of printf()
Simon Glass
sjg at chromium.org
Thu Aug 22 15:54:54 CEST 2024
The code makes quite a few uses of __func__ which puts the function
name into the resulting SPL image. Use the log subsystem instead, to
reduce size.
The CONFIG_LOGF_FUNC option can be used to enable the function name.
Use lower-case hex for the status output in sdhci_transfer_data(), to
match sdhci_send_command()
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>
---
Changes in v4:
- Mention the change to lower case in the commit message
Changes in v3:
- Keep hex prefix on values which currently have it
- Fix up the second parts of the 'mmc%d busy' log_warning()
- Restore the original error message for configuring DLL
Changes in v2:
- Various updates to log messages
- Drop an unnecessary cast
drivers/mmc/sdhci.c | 52 +++++++++++++++++++--------------------------
1 file changed, 22 insertions(+), 30 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 560b7e889c7..4833b5158c7 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -32,8 +32,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- printf("%s: Reset 0x%x never completed.\n",
- __func__, (int)mask);
+ log_warning("Reset %#x never completed\n", mask);
return;
}
timeout--;
@@ -139,8 +138,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
do {
stat = sdhci_readl(host, SDHCI_INT_STATUS);
if (stat & SDHCI_INT_ERROR) {
- pr_debug("%s: Error detected in status(0x%X)!\n",
- __func__, stat);
+ log_debug("Error detected in status(%#x)!\n", stat);
return -EIO;
}
if (!transfer_done && (stat & rdy)) {
@@ -173,7 +171,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
if (timeout-- > 0)
udelay(10);
else {
- printf("%s: Transfer data timeout\n", __func__);
+ log_err("Transfer data timeout\n");
return -ETIMEDOUT;
}
} while (!(stat & SDHCI_INT_DATA_END));
@@ -232,13 +230,13 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (time >= cmd_timeout) {
- printf("%s: MMC: %d busy ", __func__, mmc_dev);
+ log_warning("mmc%d busy ", mmc_dev);
if (2 * cmd_timeout <= SDHCI_CMD_MAX_TIMEOUT) {
cmd_timeout += cmd_timeout;
- printf("timeout increasing to: %u ms.\n",
- cmd_timeout);
+ log_warning("timeout increasing to: %u ms\n",
+ cmd_timeout);
} else {
- puts("timeout.\n");
+ log_warning("timeout\n");
return -ECOMM;
}
}
@@ -316,8 +314,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
}
if (get_timer(start) >= SDHCI_READ_STATUS_TIMEOUT) {
- printf("%s: Timeout for status update: %08x %08x\n",
- __func__, stat, mask);
+ log_warning("Timeout for status update: %08x %08x\n",
+ stat, mask);
return -ETIMEDOUT;
}
} while ((stat & mask) != mask);
@@ -358,7 +356,7 @@ static int sdhci_execute_tuning(struct udevice *dev, uint opcode)
struct mmc *mmc = mmc_get_mmc_dev(dev);
struct sdhci_host *host = mmc->priv;
- debug("%s\n", __func__);
+ log_debug("sdhci tuning\n");
if (host->ops && host->ops->platform_execute_tuning) {
err = host->ops->platform_execute_tuning(mmc, opcode);
@@ -380,8 +378,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
while (sdhci_readl(host, SDHCI_PRESENT_STATE) &
(SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) {
if (timeout == 0) {
- printf("%s: Timeout to wait cmd & data inhibit\n",
- __func__);
+ log_err("Timeout waiting for cmd & data inhibit\n");
return -EBUSY;
}
@@ -397,7 +394,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
if (host->ops && host->ops->set_delay) {
ret = host->ops->set_delay(host);
if (ret) {
- printf("%s: Error while setting tap delay\n", __func__);
+ log_err("Error while setting tap delay\n");
return ret;
}
}
@@ -405,7 +402,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
if (host->ops && host->ops->config_dll) {
ret = host->ops->config_dll(host, clock, false);
if (ret) {
- printf("%s: Error while configuring dll\n", __func__);
+ log_err("Error configuring dll\n");
return ret;
}
}
@@ -456,7 +453,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
if (host->ops && host->ops->config_dll) {
ret = host->ops->config_dll(host, clock, true);
if (ret) {
- printf("%s: Error while configuring dll\n", __func__);
+ log_err("Error while configuring dll\n");
return ret;
}
}
@@ -472,8 +469,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printf("%s: Internal clock never stabilised.\n",
- __func__);
+ log_err("Internal clock never stabilised.\n");
return -EBUSY;
}
timeout--;
@@ -738,8 +734,7 @@ static int sdhci_init(struct mmc *mmc)
if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) {
host->align_buffer = memalign(8, 512 * 1024);
if (!host->align_buffer) {
- printf("%s: Aligned buffer alloc failed!!!\n",
- __func__);
+ log_err("Aligned buffer alloc failed\n");
return -ENOMEM;
}
}
@@ -881,20 +876,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
#else
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
#endif
- debug("%s, caps: 0x%x\n", __func__, caps);
+ log_debug("caps: %#x\n", caps);
#if CONFIG_IS_ENABLED(MMC_SDHCI_SDMA)
if ((caps & SDHCI_CAN_DO_SDMA)) {
host->flags |= USE_SDMA;
} else {
- debug("%s: Your controller doesn't support SDMA!!\n",
- __func__);
+ log_debug("Controller doesn't support SDMA\n");
}
#endif
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
if (!(caps & SDHCI_CAN_DO_ADMA2)) {
- printf("%s: Your controller doesn't support ADMA!!\n",
- __func__);
+ log_err("Controller doesn't support ADMA\n");
return -EINVAL;
}
if (!host->adma_desc_table) {
@@ -927,7 +920,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
#else
caps_1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
#endif
- debug("%s, caps_1: 0x%x\n", __func__, caps_1);
+ log_debug("caps_1: %#x\n", caps_1);
host->clk_mul = (caps_1 & SDHCI_CLOCK_MUL_MASK) >>
SDHCI_CLOCK_MUL_SHIFT;
@@ -953,8 +946,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
host->max_clk *= host->clk_mul;
}
if (host->max_clk == 0) {
- printf("%s: Hardware doesn't specify base clock frequency\n",
- __func__);
+ log_err("Hardware doesn't specify base clock frequency\n");
return -EINVAL;
}
if (f_max && (f_max < host->max_clk))
@@ -1047,7 +1039,7 @@ int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min)
host->mmc = mmc_create(&host->cfg, host);
if (host->mmc == NULL) {
- printf("%s: mmc create fail!\n", __func__);
+ log_err("mmc create fail\n");
return -ENOMEM;
}
--
2.34.1
More information about the U-Boot
mailing list