[PATCH v4 06/14] mmc: Use logging instead of pr_err()

Simon Glass sjg at chromium.org
Thu Aug 22 15:54:55 CEST 2024


Use the log subsystem instead of dev, to avoid including function names
in the code.

The CONFIG_LOGF_FUNC option can be used to enable the function name.

Update 'enhanced size' to use hex since this is the U-Boot default and
more natural for the large numbers involved.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Sean Anderson <seanga2 at gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>
---

Changes in v4:
- Put a 0x prefix on the 'enhanced size' message

Changes in v3:
- Fix 'enver' typo while we are here
- Drop unnecessary braces around 'Card did not respond' message

 drivers/mmc/mmc.c | 46 +++++++++++++++++++++++-----------------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index cf8277cbed8..9644aa7aa43 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -294,7 +294,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
 
 		if (status & MMC_STATUS_MASK) {
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-			pr_err("Status Error: 0x%08x\n", status);
+			log_err("Status Error: %#08x\n", status);
 #endif
 			return -ECOMM;
 		}
@@ -307,7 +307,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms)
 
 	if (timeout_ms <= 0) {
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-		pr_err("Timeout waiting card ready\n");
+		log_err("Timeout waiting card ready\n");
 #endif
 		return -ETIMEDOUT;
 	}
@@ -449,7 +449,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,
 	if (blkcnt > 1) {
 		if (mmc_send_stop_transmission(mmc, false)) {
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-			pr_err("mmc fail to send stop cmd\n");
+			log_err("mmc fail to send stop cmd\n");
 #endif
 			return 0;
 		}
@@ -500,8 +500,8 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt,
 
 	if ((start + blkcnt) > block_dev->lba) {
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-		pr_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
-		       start + blkcnt, block_dev->lba);
+		log_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n",
+			start + blkcnt, block_dev->lba);
 #endif
 		return 0;
 	}
@@ -996,7 +996,7 @@ static int mmc_get_capabilities(struct mmc *mmc)
 		return 0;
 
 	if (!ext_csd) {
-		pr_err("No ext_csd found!\n"); /* this should enver happen */
+		log_err("No ext_csd found!\n"); /* this should never happen */
 		return -ENOTSUPP;
 	}
 
@@ -1108,17 +1108,17 @@ int mmc_hwpart_config(struct mmc *mmc,
 		return -EINVAL;
 
 	if (IS_SD(mmc) || (mmc->version < MMC_VERSION_4_41)) {
-		pr_err("eMMC >= 4.4 required for enhanced user data area\n");
+		log_err("eMMC >= 4.4 required for enhanced user data area\n");
 		return -EMEDIUMTYPE;
 	}
 
 	if (!(mmc->part_support & PART_SUPPORT)) {
-		pr_err("Card does not support partitioning\n");
+		log_err("Card does not support partitioning\n");
 		return -EMEDIUMTYPE;
 	}
 
 	if (!mmc->hc_wp_grp_size) {
-		pr_err("Card does not define HC WP group size\n");
+		log_err("Card does not define HC WP group size\n");
 		return -EMEDIUMTYPE;
 	}
 
@@ -1126,8 +1126,7 @@ int mmc_hwpart_config(struct mmc *mmc,
 	if (conf->user.enh_size) {
 		if (conf->user.enh_size % mmc->hc_wp_grp_size ||
 		    conf->user.enh_start % mmc->hc_wp_grp_size) {
-			pr_err("User data enhanced area not HC WP group "
-			       "size aligned\n");
+			log_err("User data enhanced area not HC WP group size aligned\n");
 			return -EINVAL;
 		}
 		part_attrs |= EXT_CSD_ENH_USR;
@@ -1145,8 +1144,8 @@ int mmc_hwpart_config(struct mmc *mmc,
 
 	for (pidx = 0; pidx < 4; pidx++) {
 		if (conf->gp_part[pidx].size % mmc->hc_wp_grp_size) {
-			pr_err("GP%i partition not HC WP group size "
-			       "aligned\n", pidx+1);
+			log_err("GP%i partition not HC WP group-size aligned\n",
+				pidx + 1);
 			return -EINVAL;
 		}
 		gp_size_mult[pidx] = conf->gp_part[pidx].size / mmc->hc_wp_grp_size;
@@ -1157,7 +1156,7 @@ int mmc_hwpart_config(struct mmc *mmc,
 	}
 
 	if (part_attrs && ! (mmc->part_support & ENHNCD_SUPPORT)) {
-		pr_err("Card does not support enhanced attribute\n");
+		log_err("Card does not support enhanced attribute\n");
 		return -EMEDIUMTYPE;
 	}
 
@@ -1170,8 +1169,8 @@ int mmc_hwpart_config(struct mmc *mmc,
 		(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT+1] << 8) +
 		ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT];
 	if (tot_enh_size_mult > max_enh_size_mult) {
-		pr_err("Total enhanced size exceeds maximum (%u > %u)\n",
-		       tot_enh_size_mult, max_enh_size_mult);
+		log_err("Total enhanced size exceeds maximum (%#x > %#x)\n",
+			tot_enh_size_mult, max_enh_size_mult);
 		return -EMEDIUMTYPE;
 	}
 
@@ -1204,7 +1203,7 @@ int mmc_hwpart_config(struct mmc *mmc,
 
 	if (ext_csd[EXT_CSD_PARTITION_SETTING] &
 	    EXT_CSD_PARTITION_SETTING_COMPLETED) {
-		pr_err("Card already partitioned\n");
+		log_err("Card already partitioned\n");
 		return -EPERM;
 	}
 
@@ -1875,7 +1874,7 @@ error:
 		}
 	}
 
-	pr_err("unable to select a mode\n");
+	log_err("unable to select a mode\n");
 	return -ENOTSUPP;
 }
 
@@ -2253,7 +2252,7 @@ error:
 		}
 	}
 
-	pr_err("unable to select a mode : %d\n", err);
+	log_err("unable to select a mode: %d\n", err);
 
 	return -ENOTSUPP;
 }
@@ -2921,7 +2920,8 @@ retry:
 		if (err) {
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 			if (!quiet)
-				pr_err("Card did not respond to voltage select! : %d\n", err);
+				log_err("Card did not respond to voltage select! : %d\n",
+					err);
 #endif
 			return -EOPNOTSUPP;
 		}
@@ -2954,7 +2954,7 @@ int mmc_start_init(struct mmc *mmc)
 						   | MMC_CAP(MMC_LEGACY) |
 						   MMC_MODE_1BIT);
 			} else {
-				pr_err("bus_mode requested is not supported\n");
+				log_err("bus_mode requested is not supported\n");
 				return -EINVAL;
 			}
 		}
@@ -2974,7 +2974,7 @@ int mmc_start_init(struct mmc *mmc)
 	if (no_card) {
 		mmc->has_init = 0;
 #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
-		pr_err("MMC: no card present\n");
+		log_err("MMC: no card present\n");
 #endif
 		return -ENOMEDIUM;
 	}
@@ -3103,7 +3103,7 @@ static int mmc_probe(struct bd_info *bis)
 	uclass_foreach_dev(dev, uc) {
 		ret = device_probe(dev);
 		if (ret)
-			pr_err("%s - probe failed: %d\n", dev->name, ret);
+			log_err("%s - probe failed: %d\n", dev->name, ret);
 	}
 
 	return 0;
-- 
2.34.1



More information about the U-Boot mailing list