[PATCH v2 1/1] board: tegra: convert boards to text env
Svyatoslav Ryhel
clamor95 at gmail.com
Wed Aug 7 14:14:34 CEST 2024
Convert boards to use text based env. This is the first stage of
conversion, common inclusions should be converted next.
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
board/asus/grouper/grouper.env | 15 +++
.../asus/transformer-t20/transformer-t20.env | 17 ++++
.../transformer-t30/configs/tf600t.config | 1 +
board/asus/transformer-t30/tf600t.env | 16 ++++
.../asus/transformer-t30/transformer-t30.env | 17 ++++
board/htc/endeavoru/endeavoru.env | 13 +++
.../ideapad-yoga-11/ideapad-yoga-11.env | 16 ++++
board/lg/x3-t30/configs/p880.config | 1 +
board/lg/x3-t30/configs/p895.config | 1 +
board/lg/x3-t30/p880.env | 15 +++
board/lg/x3-t30/p895.env | 13 +++
board/microsoft/surface-rt/surface-rt.env | 14 +++
board/nvidia/cardhu/cardhu.env | 2 +
board/nvidia/p2771-0000/p2771-0000.env | 22 +++++
board/nvidia/p3450-0000/p3450-0000.env | 7 ++
board/toradex/apalis-tk1/apalis_tk1.env | 45 +++++++++
board/toradex/apalis_t30/apalis_t30.env | 9 ++
board/toradex/colibri_t20/colibri_t20.env | 3 +
board/toradex/colibri_t30/colibri_t30.env | 9 ++
board/wexler/qc750/qc750.env | 15 +++
configs/apalis-tk1_defconfig | 3 +-
configs/apalis_t30_defconfig | 1 +
configs/cardhu_defconfig | 1 +
configs/colibri_t20_defconfig | 1 +
configs/colibri_t30_defconfig | 1 +
configs/endeavoru_defconfig | 1 +
configs/grouper_common_defconfig | 1 +
configs/ideapad-yoga-11_defconfig | 1 +
configs/p2771-0000-000_defconfig | 1 +
configs/p3450-0000_defconfig | 1 +
configs/qc750_defconfig | 1 +
configs/surface-rt_defconfig | 1 +
configs/transformer_t20_defconfig | 1 +
configs/transformer_t30_defconfig | 1 +
include/configs/apalis-tk1.h | 58 ------------
include/configs/apalis_t30.h | 12 ---
include/configs/cardhu.h | 4 -
include/configs/colibri_t20.h | 11 ---
include/configs/colibri_t30.h | 12 ---
include/configs/endeavoru.h | 43 ---------
include/configs/grouper.h | 45 ---------
include/configs/ideapad-yoga-11.h | 58 ------------
include/configs/p2771-0000.h | 20 ----
include/configs/p3450-0000.h | 13 ---
include/configs/qc750.h | 42 ---------
include/configs/surface-rt.h | 18 ----
include/configs/transformer-common.h | 91 -------------------
include/configs/transformer-t20.h | 4 +-
include/configs/transformer-t30.h | 6 +-
include/configs/x3-t30.h | 44 ---------
include/env/nvidia/prod_upd.env | 60 ++++++++++++
51 files changed, 332 insertions(+), 476 deletions(-)
create mode 100644 board/asus/grouper/grouper.env
create mode 100644 board/asus/transformer-t20/transformer-t20.env
create mode 100644 board/asus/transformer-t30/tf600t.env
create mode 100644 board/asus/transformer-t30/transformer-t30.env
create mode 100644 board/htc/endeavoru/endeavoru.env
create mode 100644 board/lenovo/ideapad-yoga-11/ideapad-yoga-11.env
create mode 100644 board/lg/x3-t30/p880.env
create mode 100644 board/lg/x3-t30/p895.env
create mode 100644 board/microsoft/surface-rt/surface-rt.env
create mode 100644 board/nvidia/cardhu/cardhu.env
create mode 100644 board/nvidia/p2771-0000/p2771-0000.env
create mode 100644 board/nvidia/p3450-0000/p3450-0000.env
create mode 100644 board/toradex/apalis-tk1/apalis_tk1.env
create mode 100644 board/toradex/apalis_t30/apalis_t30.env
create mode 100644 board/toradex/colibri_t20/colibri_t20.env
create mode 100644 board/toradex/colibri_t30/colibri_t30.env
create mode 100644 board/wexler/qc750/qc750.env
delete mode 100644 include/configs/transformer-common.h
create mode 100644 include/env/nvidia/prod_upd.env
diff --git a/board/asus/grouper/grouper.env b/board/asus/grouper/grouper.env
new file mode 100644
index 0000000000..b1f4aeb555
--- /dev/null
+++ b/board/asus/grouper/grouper.env
@@ -0,0 +1,15 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Lid
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_2=update bootloader=run flash_uboot
+bootmenu_3=reboot RCM=enterrcm
+bootmenu_4=reboot=reset
+bootmenu_5=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/asus/transformer-t20/transformer-t20.env b/board/asus/transformer-t20/transformer-t20.env
new file mode 100644
index 0000000000..2f7e8206c2
--- /dev/null
+++ b/board/asus/transformer-t20/transformer-t20.env
@@ -0,0 +1,17 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Lid sensor
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+boot_dev=1
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run flash_uboot
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/asus/transformer-t30/configs/tf600t.config b/board/asus/transformer-t30/configs/tf600t.config
index b3734869f5..a452a19fe4 100644
--- a/board/asus/transformer-t30/configs/tf600t.config
+++ b/board/asus/transformer-t30/configs/tf600t.config
@@ -1,3 +1,4 @@
+CONFIG_ENV_SOURCE_FILE="tf600t"
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_usb0; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
# CONFIG_I2C_MUX is not set
diff --git a/board/asus/transformer-t30/tf600t.env b/board/asus/transformer-t30/tf600t.env
new file mode 100644
index 0000000000..7bc2b80c48
--- /dev/null
+++ b/board/asus/transformer-t30/tf600t.env
@@ -0,0 +1,16 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Lid sensor
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run update_spi
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/asus/transformer-t30/transformer-t30.env b/board/asus/transformer-t30/transformer-t30.env
new file mode 100644
index 0000000000..2f7e8206c2
--- /dev/null
+++ b/board/asus/transformer-t30/transformer-t30.env
@@ -0,0 +1,17 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Lid sensor
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+boot_dev=1
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run flash_uboot
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/htc/endeavoru/endeavoru.env b/board/htc/endeavoru/endeavoru.env
new file mode 100644
index 0000000000..53e9b56845
--- /dev/null
+++ b/board/htc/endeavoru/endeavoru.env
@@ -0,0 +1,13 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_2=update bootloader=run flash_uboot
+bootmenu_3=reboot RCM=enterrcm
+bootmenu_4=reboot=reset
+bootmenu_5=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/lenovo/ideapad-yoga-11/ideapad-yoga-11.env b/board/lenovo/ideapad-yoga-11/ideapad-yoga-11.env
new file mode 100644
index 0000000000..7bc2b80c48
--- /dev/null
+++ b/board/lenovo/ideapad-yoga-11/ideapad-yoga-11.env
@@ -0,0 +1,16 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Lid sensor
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run update_spi
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/lg/x3-t30/configs/p880.config b/board/lg/x3-t30/configs/p880.config
index 57c2885779..44e0fa7ef7 100644
--- a/board/lg/x3-t30/configs/p880.config
+++ b/board/lg/x3-t30/configs/p880.config
@@ -1,3 +1,4 @@
+CONFIG_ENV_SOURCE_FILE="p880"
CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p880"
CONFIG_SYS_PROMPT="Tegra30 (P880) # "
CONFIG_VIDEO_LCD_RENESAS_R69328=y
diff --git a/board/lg/x3-t30/configs/p895.config b/board/lg/x3-t30/configs/p895.config
index 2eba92594b..267ae3a80d 100644
--- a/board/lg/x3-t30/configs/p895.config
+++ b/board/lg/x3-t30/configs/p895.config
@@ -1,3 +1,4 @@
+CONFIG_ENV_SOURCE_FILE="p895"
CONFIG_DEFAULT_DEVICE_TREE="tegra30-lg-p895"
CONFIG_SYS_PROMPT="Tegra30 (P895) # "
CONFIG_VIDEO_LCD_RENESAS_R61307=y
diff --git a/board/lg/x3-t30/p880.env b/board/lg/x3-t30/p880.env
new file mode 100644
index 0000000000..f2bf298a99
--- /dev/null
+++ b/board/lg/x3-t30/p880.env
@@ -0,0 +1,15 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+boot_dev=1
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run flash_uboot
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/lg/x3-t30/p895.env b/board/lg/x3-t30/p895.env
new file mode 100644
index 0000000000..53e9b56845
--- /dev/null
+++ b/board/lg/x3-t30/p895.env
@@ -0,0 +1,13 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_2=update bootloader=run flash_uboot
+bootmenu_3=reboot RCM=enterrcm
+bootmenu_4=reboot=reset
+bootmenu_5=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/microsoft/surface-rt/surface-rt.env b/board/microsoft/surface-rt/surface-rt.env
new file mode 100644
index 0000000000..682929096a
--- /dev/null
+++ b/board/microsoft/surface-rt/surface-rt.env
@@ -0,0 +1,14 @@
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+button_cmd_1_name=Hall Sensor
+button_cmd_1=poweroff
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=boot from USB=usb reset; usb start; bootflow scan
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/board/nvidia/cardhu/cardhu.env b/board/nvidia/cardhu/cardhu.env
new file mode 100644
index 0000000000..9d1e3e1da2
--- /dev/null
+++ b/board/nvidia/cardhu/cardhu.env
@@ -0,0 +1,2 @@
+board_name=cardhu-a04
+fdtfile=tegra30-cardhu-a04.dtb
diff --git a/board/nvidia/p2771-0000/p2771-0000.env b/board/nvidia/p2771-0000/p2771-0000.env
new file mode 100644
index 0000000000..6789cc1cc6
--- /dev/null
+++ b/board/nvidia/p2771-0000/p2771-0000.env
@@ -0,0 +1,22 @@
+calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r ramdisk_addr_r
+
+kernel_addr_r_align=00200000
+kernel_addr_r_offset=00080000
+kernel_addr_r_size=02000000
+kernel_addr_r_aliases=loadaddr
+
+fdt_addr_r_align=00200000
+fdt_addr_r_offset=00000000
+fdt_addr_r_size=00200000
+
+scriptaddr_align=00200000
+scriptaddr_offset=00000000
+scriptaddr_size=00200000
+
+pxefile_addr_r_align=00200000
+pxefile_addr_r_offset=00000000
+pxefile_addr_r_size=00200000
+
+ramdisk_addr_r_align=00200000
+ramdisk_addr_r_offset=00000000
+ramdisk_addr_r_size=02000000
diff --git a/board/nvidia/p3450-0000/p3450-0000.env b/board/nvidia/p3450-0000/p3450-0000.env
new file mode 100644
index 0000000000..a7d7ab3c43
--- /dev/null
+++ b/board/nvidia/p3450-0000/p3450-0000.env
@@ -0,0 +1,7 @@
+/* Only MMC/PXE/DHCP for now, add USB back in later when supported */
+boot_targets=mmc1 mmc0 pxe dhcp
+
+preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then
+ load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr;
+ source ${scriptaddr};
+ fi
diff --git a/board/toradex/apalis-tk1/apalis_tk1.env b/board/toradex/apalis-tk1/apalis_tk1.env
new file mode 100644
index 0000000000..ff883d6042
--- /dev/null
+++ b/board/toradex/apalis-tk1/apalis_tk1.env
@@ -0,0 +1,45 @@
+/*
+ * Custom Boot configuration:
+ * 1. 8bit SD port (MMC1)
+ * 2. 4bit SD port (MMC2)
+ * 3. eMMC (MMC0)
+ */
+boot_targets=mmc1 mmc2 mmc0 usb pxe dhcp
+
+boot_file=zImage
+boot_script_dhcp=boot.scr
+console=ttyS0
+defargs=lp0_vec=2064 at 0xf46ff000 core_edp_mv=1150 core_edp_ma=4000
+ usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0
+ user_debug=30 pcie_aspm=off
+dfu_alt_info=apalis-tk1.img raw 0x0 0x500 mmcpart 1;
+ boot part 0 1 mmcpart 0;
+ rootfs part 0 2 mmcpart 0;
+ zImage fat 0 1 mmcpart 0;
+ tegra124-apalis-eval.dtb fat 0 1 mmcpart 0
+fdt_board=eval
+fdt_fixup=;
+fdt_module=apalis-v1.2
+uboot_hwpart=1
+uboot_blk=0
+set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff &&
+ setexpr blkcnt ${blkcnt} / 0x200
+update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} &&
+ mmc write ${loadaddr} ${uboot_blk} ${blkcnt}
+setethupdate=if env exists ethaddr; then; else setenv ethaddr
+ 00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr}
+ flash_eth.img && source ${loadaddr}
+setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan;
+ load ${interface} ${drive}:1 ${loadaddr} flash_blk.img
+ || setenv drive 2; mmc rescan; load ${interface} ${drive}:1
+ ${loadaddr} flash_blk.img &&
+ source ${loadaddr}
+setup=setenv setupargs igb_mac=${ethaddr}
+ consoleblank=0 no_console_suspend=1 console=tty1
+ console=${console},${baudrate}n8 debug_uartport=lsport,0
+ ${memargs}
+setupdate=run setsdupdate || run setusbupdate || run setethupdate
+setusbupdate=usb start && setenv interface usb; setenv drive 0;
+ load ${interface} ${drive}:1 ${loadaddr} flash_blk.img &&
+ source ${loadaddr}
+vidargs=fbcon=map:1
diff --git a/board/toradex/apalis_t30/apalis_t30.env b/board/toradex/apalis_t30/apalis_t30.env
new file mode 100644
index 0000000000..2e5161e3b8
--- /dev/null
+++ b/board/toradex/apalis_t30/apalis_t30.env
@@ -0,0 +1,9 @@
+uboot_hwpart=1
+uboot_blk=0
+
+set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff &&
+ setexpr blkcnt ${blkcnt} / 0x200
+update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} &&
+ mmc write ${loadaddr} ${uboot_blk} ${blkcnt}
+
+boot_script_dhcp=boot.scr
diff --git a/board/toradex/colibri_t20/colibri_t20.env b/board/toradex/colibri_t20/colibri_t20.env
new file mode 100644
index 0000000000..5e9f0630b2
--- /dev/null
+++ b/board/toradex/colibri_t20/colibri_t20.env
@@ -0,0 +1,3 @@
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+boot_script_dhcp=boot.scr
+update_uboot=nand erase.part u-boot && nand write ${loadaddr} u-boot ${filesize}
diff --git a/board/toradex/colibri_t30/colibri_t30.env b/board/toradex/colibri_t30/colibri_t30.env
new file mode 100644
index 0000000000..2e5161e3b8
--- /dev/null
+++ b/board/toradex/colibri_t30/colibri_t30.env
@@ -0,0 +1,9 @@
+uboot_hwpart=1
+uboot_blk=0
+
+set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff &&
+ setexpr blkcnt ${blkcnt} / 0x200
+update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} &&
+ mmc write ${loadaddr} ${uboot_blk} ${blkcnt}
+
+boot_script_dhcp=boot.scr
diff --git a/board/wexler/qc750/qc750.env b/board/wexler/qc750/qc750.env
new file mode 100644
index 0000000000..f2bf298a99
--- /dev/null
+++ b/board/wexler/qc750/qc750.env
@@ -0,0 +1,15 @@
+#include <env/nvidia/prod_upd.env>
+
+button_cmd_0_name=Volume Down
+button_cmd_0=bootmenu
+partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}
+boot_dev=1
+
+bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu
+bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu
+bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu
+bootmenu_3=update bootloader=run flash_uboot
+bootmenu_4=reboot RCM=enterrcm
+bootmenu_5=reboot=reset
+bootmenu_6=power off=poweroff
+bootmenu_delay=-1
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index 20c9c06cde..bc5a75e85b 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="apalis-tk1"
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_DEFAULT_DEVICE_TREE="tegra124-apalis"
@@ -19,7 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTCOMMAND="setenv fdtfile ${soc}-${fdt_module}-${fdt_board}.dtb && run distro_bootcmd"
+CONFIG_BOOTCOMMAND="setenv fdtfile ${soc}-${fdt_module}-${fdt_board}.dtb && bootflow scan"
CONFIG_SYS_CBSIZE=1024
CONFIG_SYS_PBSIZE=1054
CONFIG_CONSOLE_MUX=y
diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig
index 03a1f2c239..203c5dae90 100644
--- a/configs/apalis_t30_defconfig
+++ b/configs/apalis_t30_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="apalis_t30"
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_DEFAULT_DEVICE_TREE="tegra30-apalis"
diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig
index 52183a3e30..39129afb52 100644
--- a/configs/cardhu_defconfig
+++ b/configs/cardhu_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="cardhu"
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFE000
diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig
index 8d8423ac79..50b9a91377 100644
--- a/configs/colibri_t20_defconfig
+++ b/configs/colibri_t20_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x00110000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="colibri_t20"
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x200000
CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri"
diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig
index 394d656a12..b5e69a5805 100644
--- a/configs/colibri_t30_defconfig
+++ b/configs/colibri_t30_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="colibri_t30"
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri"
diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig
index 3230d360ed..326ece89ad 100644
--- a/configs/endeavoru_defconfig
+++ b/configs/endeavoru_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="endeavoru"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-htc-endeavoru"
diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig
index 001f5b8804..94fb989c23 100644
--- a/configs/grouper_common_defconfig
+++ b/configs/grouper_common_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="grouper"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-nexus7-grouper-E1565"
diff --git a/configs/ideapad-yoga-11_defconfig b/configs/ideapad-yoga-11_defconfig
index 25624c6886..2e4c9a5ae8 100644
--- a/configs/ideapad-yoga-11_defconfig
+++ b/configs/ideapad-yoga-11_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="ideapad-yoga-11"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-lenovo-ideapad-yoga-11"
diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig
index 83e904b4de..635c8e9361 100644
--- a/configs/p2771-0000-000_defconfig
+++ b/configs/p2771-0000-000_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80080000
CONFIG_NR_DRAM_BANKS=1026
+CONFIG_ENV_SOURCE_FILE="p2771-0000"
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-000"
diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig
index 67bc3f4bb0..9fdc23f54c 100644
--- a/configs/p3450-0000_defconfig
+++ b/configs/p3450-0000_defconfig
@@ -6,6 +6,7 @@ CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x80080000
CONFIG_SYS_MALLOC_LEN=0x2500000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="p3450-0000"
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFE000
diff --git a/configs/qc750_defconfig b/configs/qc750_defconfig
index 17b5ec8824..9fc737b3d3 100644
--- a/configs/qc750_defconfig
+++ b/configs/qc750_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="qc750"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-wexler-qc750"
diff --git a/configs/surface-rt_defconfig b/configs/surface-rt_defconfig
index 2326d24f28..521e622f97 100644
--- a/configs/surface-rt_defconfig
+++ b/configs/surface-rt_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="surface-rt"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-microsoft-surface-rt"
diff --git a/configs/transformer_t20_defconfig b/configs/transformer_t20_defconfig
index 13bb269500..d6f5c7085a 100644
--- a/configs/transformer_t20_defconfig
+++ b/configs/transformer_t20_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x00110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="transformer-t20"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra20-asus-tf101"
diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
index 1ebdb31acf..e3a70cc8c3 100644
--- a/configs/transformer_t30_defconfig
+++ b/configs/transformer_t30_defconfig
@@ -5,6 +5,7 @@ CONFIG_CMDLINE_TAG=y
CONFIG_INITRD_TAG=y
CONFIG_TEXT_BASE=0x80110000
CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="transformer-t30"
CONFIG_ENV_SIZE=0x3000
CONFIG_ENV_OFFSET=0xFFFFD000
CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 71d4727ca9..4c690a1785 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -18,64 +18,6 @@
#define FDT_MODULE "apalis-v1.2"
#define FDT_MODULE_V1_0 "apalis"
-/*
- * Custom Distro Boot configuration:
- * 1. 8bit SD port (MMC1)
- * 2. 4bit SD port (MMC2)
- * 3. eMMC (MMC0)
- */
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 2) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-#define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \
- "boot part 0 1 mmcpart 0; " \
- "rootfs part 0 2 mmcpart 0; " \
- "zImage fat 0 1 mmcpart 0; " \
- "tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
-
-#define UBOOT_UPDATE \
- "uboot_hwpart=1\0" \
- "uboot_blk=0\0" \
- "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
- "setexpr blkcnt ${blkcnt} / 0x200\0" \
- "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
- "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_file=zImage\0" \
- "boot_script_dhcp=boot.scr\0" \
- "console=ttyS0\0" \
- "defargs=lp0_vec=2064 at 0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
- "usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
- "user_debug=30 pcie_aspm=off\0" \
- "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
- "fdt_board=eval\0" \
- "fdt_fixup=;\0" \
- "fdt_module=" FDT_MODULE "\0" \
- UBOOT_UPDATE \
- "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
- "00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
- "flash_eth.img && source ${loadaddr}\0" \
- "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \
- "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \
- "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1 " \
- "${loadaddr} flash_blk.img && " \
- "source ${loadaddr}\0" \
- "setup=setenv setupargs igb_mac=${ethaddr} " \
- "consoleblank=0 no_console_suspend=1 console=tty1 " \
- "console=${console},${baudrate}n8 debug_uartport=lsport,0 " \
- "${memargs}\0" \
- "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
- "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
- "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
- "source ${loadaddr}\0" \
- "vidargs=fbcon=map:1\0"
-
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index 80204d706d..87a679efde 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -22,18 +22,6 @@
*/
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define UBOOT_UPDATE \
- "uboot_hwpart=1\0" \
- "uboot_blk=0\0" \
- "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
- "setexpr blkcnt ${blkcnt} / 0x200\0" \
- "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
- "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- UBOOT_UPDATE \
- "boot_script_dhcp=boot.scr\0"
-
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 82729eb95c..3412b883cb 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -13,10 +13,6 @@
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "NVIDIA Cardhu"
-#define BOARD_EXTRA_ENV_SETTINGS \
- "board_name=cardhu-a04\0" \
- "fdtfile=tegra30-cardhu-a04.dtb\0"
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index ea7d648eb6..bc616d1436 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -13,17 +13,6 @@
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-/* NAND support */
-
-#define UBOOT_UPDATE \
- "update_uboot=nand erase.part u-boot && " \
- "nand write ${loadaddr} u-boot ${filesize}\0" \
-
-/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_script_dhcp=boot.scr\0" \
- UBOOT_UPDATE
-
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index 7edb2c0b26..1f474669a7 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -23,18 +23,6 @@
*/
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
-#define UBOOT_UPDATE \
- "uboot_hwpart=1\0" \
- "uboot_blk=0\0" \
- "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
- "setexpr blkcnt ${blkcnt} / 0x200\0" \
- "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
- "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- UBOOT_UPDATE \
- "boot_script_dhcp=boot.scr\0"
-
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/endeavoru.h b/include/configs/endeavoru.h
index 348078f977..33d0021ec1 100644
--- a/include/configs/endeavoru.h
+++ b/include/configs/endeavoru.h
@@ -10,54 +10,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <linux/sizes.h>
-
#include "tegra30-common.h"
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "HTC One X"
-#define ENDEAVORU_FLASH_UBOOT \
- "flash_uboot=echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "mmc dev 0 1;" \
- "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
- "echo Reading bootloader;" \
- "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 0:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader to eMMC;" \
- "mmc dev 0 1;" \
- "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
- "mmc dev 0 2;" \
- "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
- "echo Bootloader written successfully;" \
- "pause 'Press ANY key to reboot device...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
-
-#define ENDEAVORU_BOOTMENU \
- ENDEAVORU_FLASH_UBOOT \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_2=update bootloader=run flash_uboot\0" \
- "bootmenu_3=reboot RCM=enterrcm\0" \
- "bootmenu_4=reboot=reset\0" \
- "bootmenu_5=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- ENDEAVORU_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/grouper.h b/include/configs/grouper.h
index 8064b88902..b6ef6ff2ec 100644
--- a/include/configs/grouper.h
+++ b/include/configs/grouper.h
@@ -6,56 +6,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <linux/sizes.h>
-
#include "tegra30-common.h"
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "ASUS Google Nexus 7 (2012)"
-#define GROUPER_FLASH_UBOOT \
- "flash_uboot=echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "mmc dev 0 1;" \
- "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
- "echo Reading bootloader;" \
- "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 0:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader to eMMC;" \
- "mmc dev 0 1;" \
- "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
- "mmc dev 0 2;" \
- "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
- "echo Bootloader written successfully;" \
- "pause 'Press ANY key to reboot device...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
-
-#define GROUPER_BOOTMENU \
- GROUPER_FLASH_UBOOT \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_2=update bootloader=run flash_uboot\0" \
- "bootmenu_3=reboot RCM=enterrcm\0" \
- "bootmenu_4=reboot=reset\0" \
- "bootmenu_5=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "button_cmd_1_name=Lid\0" \
- "button_cmd_1=poweroff\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- GROUPER_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/ideapad-yoga-11.h b/include/configs/ideapad-yoga-11.h
index 12c7649f78..c4e6b2a647 100644
--- a/include/configs/ideapad-yoga-11.h
+++ b/include/configs/ideapad-yoga-11.h
@@ -11,64 +11,6 @@
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "Lenovo Ideapad Yoga 11"
-#define IDEAPAD_FLASH_UBOOT \
- "flash_uboot=sf probe 0:1;" \
- "echo Dumping current SPI flash content ...;" \
- "sf read ${kernel_addr_r} 0x0 ${spi_size};" \
- "if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
- "then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
- "echo Reading SPI flash binary;" \
- "if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
- "then echo Writing bootloader into SPI flash;" \
- "sf probe 0:1;" \
- "sf update ${kernel_addr_r} 0x0 ${spi_size};" \
- "echo Bootloader SUCCESSFULLY written into SPI flash;" \
- "pause 'Press ANY key to reboot...'; reset;" \
- "else echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
- "echo Reading bootloader;" \
- "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 1:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader into SPI flash;" \
- "sf probe 0:1;" \
- "sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
- "sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
- "echo Bootloader written SUCCESSFULLY;" \
- "pause 'Press ANY key to reboot...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to reboot...'; reset; fi;" \
- "fi;" \
- "else echo SPI flash backup FAILED! Aborting ...;" \
- "pause 'Press ANY key to reboot...'; reset; fi\0"
-
-#define IDEAPAD_BOOTMENU \
- IDEAPAD_FLASH_UBOOT \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
- "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_3=update bootloader=run flash_uboot\0" \
- "bootmenu_4=reboot RCM=enterrcm\0" \
- "bootmenu_5=reboot=reset\0" \
- "bootmenu_6=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "spi_size=0x400000\0" \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "button_cmd_1_name=Lid sensor\0" \
- "button_cmd_1=poweroff\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- IDEAPAD_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h
index e409cc3896..fc1b7c0302 100644
--- a/include/configs/p2771-0000.h
+++ b/include/configs/p2771-0000.h
@@ -15,26 +15,6 @@
/* Environment in eMMC, at the end of 2nd "boot sector" */
-#define BOARD_EXTRA_ENV_SETTINGS \
- "calculated_vars=kernel_addr_r fdt_addr_r scriptaddr pxefile_addr_r " \
- "ramdisk_addr_r\0" \
- "kernel_addr_r_align=00200000\0" \
- "kernel_addr_r_offset=00080000\0" \
- "kernel_addr_r_size=02000000\0" \
- "kernel_addr_r_aliases=loadaddr\0" \
- "fdt_addr_r_align=00200000\0" \
- "fdt_addr_r_offset=00000000\0" \
- "fdt_addr_r_size=00200000\0" \
- "scriptaddr_align=00200000\0" \
- "scriptaddr_offset=00000000\0" \
- "scriptaddr_size=00200000\0" \
- "pxefile_addr_r_align=00200000\0" \
- "pxefile_addr_r_offset=00000000\0" \
- "pxefile_addr_r_size=00200000\0" \
- "ramdisk_addr_r_align=00200000\0" \
- "ramdisk_addr_r_offset=00000000\0" \
- "ramdisk_addr_r_size=02000000\0"
-
#include "tegra-common-post.h"
#endif
diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h
index e60f42eaa7..1138c1d306 100644
--- a/include/configs/p3450-0000.h
+++ b/include/configs/p3450-0000.h
@@ -15,19 +15,6 @@
/* Board-specific serial config */
-/* Only MMC/PXE/DHCP for now, add USB back in later when supported */
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 0) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \
- "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \
- "source ${scriptaddr}; " \
- "fi\0"
-
/* General networking support */
#include "tegra-common-post.h"
diff --git a/include/configs/qc750.h b/include/configs/qc750.h
index ce6665d0f3..ad9f9146bb 100644
--- a/include/configs/qc750.h
+++ b/include/configs/qc750.h
@@ -15,48 +15,6 @@
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "Wexler QC750"
-#define QC750_FLASH_UBOOT \
- "flash_uboot=echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "mmc dev 0 1;" \
- "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
- "echo Reading bootloader;" \
- "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 1:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader to eMMC;" \
- "mmc dev 0 1;" \
- "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
- "mmc dev 0 2;" \
- "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
- "echo Bootloader written successfully;" \
- "pause 'Press ANY key to reboot device...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
-
-#define QC750_BOOTMENU \
- QC750_FLASH_UBOOT \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
- "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_3=update bootloader=run flash_uboot\0" \
- "bootmenu_4=reboot RCM=enterrcm\0" \
- "bootmenu_5=reboot=reset\0" \
- "bootmenu_6=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- QC750_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
diff --git a/include/configs/surface-rt.h b/include/configs/surface-rt.h
index 30f6450cf3..1f0837e179 100644
--- a/include/configs/surface-rt.h
+++ b/include/configs/surface-rt.h
@@ -13,24 +13,6 @@
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "Microsoft Surface RT"
-#define SURFACE_RT_BOOTMENU \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
- "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_3=boot from USB=usb reset; usb start; bootflow scan\0" \
- "bootmenu_4=reboot RCM=enterrcm\0" \
- "bootmenu_5=reboot=reset\0" \
- "bootmenu_6=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "button_cmd_1_name=Hall Sensor\0" \
- "button_cmd_1=poweroff\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- SURFACE_RT_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/transformer-common.h b/include/configs/transformer-common.h
deleted file mode 100644
index bb6817c8d2..0000000000
--- a/include/configs/transformer-common.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2022, Svyatoslav Ryhel <clamor95 at gmail.com>.
- */
-
-#ifndef __TRANSFORMER_COMMON_H
-#define __TRANSFORMER_COMMON_H
-
-/* High-level configuration options */
-#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
-
-#define TRANSFORMER_FLASH_UBOOT \
- "flash_uboot=echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "mmc dev 0 1;" \
- "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
- "echo Reading bootloader;" \
- "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 1:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader to eMMC;" \
- "mmc dev 0 1;" \
- "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
- "mmc dev 0 2;" \
- "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
- "echo Bootloader written successfully;" \
- "pause 'Press ANY key to reboot device...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
-
-#define TRANSFORMER_FLASH_SPI \
- "update_spi=sf probe 0:1;" \
- "echo Dumping current SPI flash content ...;" \
- "sf read ${kernel_addr_r} 0x0 ${spi_size};" \
- "if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
- "then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
- "echo Reading SPI flash binary;" \
- "if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
- "then echo Writing bootloader into SPI flash;" \
- "sf probe 0:1;" \
- "sf update ${kernel_addr_r} 0x0 ${spi_size};" \
- "poweroff;" \
- "else echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
- "echo Reading bootloader;" \
- "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 1:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader into SPI flash;" \
- "sf probe 0:1;" \
- "sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
- "sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
- "echo Bootloader written successfully; poweroff;" \
- "else echo Reading bootloader failed;" \
- "poweroff; fi;" \
- "fi;" \
- "else echo SPI flash backup FAILED! Aborting ...;" \
- "poweroff; fi\0"
-
-#define TRANSFORMER_BOOTMENU \
- TRANSFORMER_FLASH_UBOOT \
- TRANSFORMER_FLASH_SPI \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
- "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_3=update bootloader=run flash_uboot\0" \
- "bootmenu_4=reboot RCM=enterrcm\0" \
- "bootmenu_5=reboot=reset\0" \
- "bootmenu_6=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "spi_size=0x400000\0" \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "button_cmd_1_name=Lid sensor\0" \
- "button_cmd_1=poweroff\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- TRANSFORMER_BOOTMENU
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/transformer-t20.h b/include/configs/transformer-t20.h
index ca1e70caa7..6a3d9b2403 100644
--- a/include/configs/transformer-t20.h
+++ b/include/configs/transformer-t20.h
@@ -11,7 +11,9 @@
#define __CONFIG_H
#include "tegra20-common.h"
-#include "transformer-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
diff --git a/include/configs/transformer-t30.h b/include/configs/transformer-t30.h
index d2a16f12c1..792b958a30 100644
--- a/include/configs/transformer-t30.h
+++ b/include/configs/transformer-t30.h
@@ -10,10 +10,10 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <linux/sizes.h>
-
#include "tegra30-common.h"
-#include "transformer-common.h"
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
diff --git a/include/configs/x3-t30.h b/include/configs/x3-t30.h
index 78a2012861..c152af9b7e 100644
--- a/include/configs/x3-t30.h
+++ b/include/configs/x3-t30.h
@@ -10,55 +10,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#include <linux/sizes.h>
-
#include "tegra30-common.h"
/* High-level configuration options */
#define CFG_TEGRA_BOARD_STRING "LG X3 Board"
-#define X3_FLASH_UBOOT \
- "flash_uboot=echo Preparing RAM;" \
- "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
- "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
- "echo Reading BCT;" \
- "mmc dev 0 1;" \
- "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
- "echo Reading bootloader;" \
- "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \
- "then echo Calculating bootloader size;" \
- "size mmc 0:1 ${bootloader_file};" \
- "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
- "echo Writing bootloader to eMMC;" \
- "mmc dev 0 1;" \
- "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
- "mmc dev 0 2;" \
- "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
- "echo Bootloader written successfully;" \
- "pause 'Press ANY key to reboot device...'; reset;" \
- "else echo Reading bootloader failed;" \
- "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
-
-#define X3_BOOTMENU \
- X3_FLASH_UBOOT \
- "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
- "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
- "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
- "bootmenu_3=update bootloader=run flash_uboot\0" \
- "bootmenu_4=reboot RCM=enterrcm\0" \
- "bootmenu_5=reboot=reset\0" \
- "bootmenu_6=power off=poweroff\0" \
- "bootmenu_delay=-1\0"
-
-#define BOARD_EXTRA_ENV_SETTINGS \
- "boot_block_size_r=0x200000\0" \
- "boot_block_size=0x1000\0" \
- "bootloader_file=u-boot-dtb-tegra.bin\0" \
- "button_cmd_0_name=Volume Down\0" \
- "button_cmd_0=bootmenu\0" \
- "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
- X3_BOOTMENU
-
/* Board-specific serial config */
#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
diff --git a/include/env/nvidia/prod_upd.env b/include/env/nvidia/prod_upd.env
new file mode 100644
index 0000000000..f4e381994b
--- /dev/null
+++ b/include/env/nvidia/prod_upd.env
@@ -0,0 +1,60 @@
+boot_block_size_r=0x200000
+boot_block_size=0x1000
+bootloader_file=u-boot-dtb-tegra.bin
+spi_size=0x400000
+boot_dev=0
+
+flash_uboot=echo Preparing RAM;
+ mw ${kernel_addr_r} 0 ${boot_block_size_r};
+ mw ${ramdisk_addr_r} 0 ${boot_block_size_r};
+ echo Reading BCT;
+ mmc dev 0 1;
+ mmc read ${kernel_addr_r} 0 ${boot_block_size};
+ echo Reading bootloader;
+ if load mmc ${boot_dev}:1 ${ramdisk_addr_r} ${bootloader_file};
+ then echo Calculating bootloader size;
+ size mmc ${boot_dev}:1 ${bootloader_file};
+ ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};
+ echo Writing bootloader to eMMC;
+ mmc dev 0 1;
+ mmc write ${kernel_addr_r} 0 ${boot_block_size};
+ mmc dev 0 2;
+ mmc write ${ramdisk_addr_r} 0 ${boot_block_size};
+ echo Bootloader written successfully;
+ pause 'Press ANY key to reboot device...'; reset;
+ else echo Reading bootloader failed;
+ pause 'Press ANY key to return to bootmenu...'; bootmenu; fi
+
+update_spi=sf probe 0:1;
+ echo Dumping current SPI flash content ...;
+ sf read ${kernel_addr_r} 0x0 ${spi_size};
+ if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};
+ then echo SPI flash content was successfully written into spi-flash-backup.bin;
+ echo Reading SPI flash binary;
+ if load mmc 1:1 ${kernel_addr_r} repart-block.bin;
+ then echo Writing bootloader into SPI flash;
+ sf probe 0:1;
+ sf update ${kernel_addr_r} 0x0 ${spi_size};
+ echo Bootloader SUCCESSFULLY written into SPI flash;
+ pause 'Press ANY key to reboot...'; reset;
+ else echo Preparing RAM;
+ mw ${kernel_addr_r} 0 ${boot_block_size_r};
+ mw ${ramdisk_addr_r} 0 ${boot_block_size_r};
+ echo Reading BCT;
+ sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};
+ echo Reading bootloader;
+ if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};
+ then echo Calculating bootloader size;
+ size mmc 1:1 ${bootloader_file};
+ ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};
+ echo Writing bootloader into SPI flash;
+ sf probe 0:1;
+ sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};
+ sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};
+ echo Bootloader written SUCCESSFULLY;
+ pause 'Press ANY key to reboot...'; reset;
+ else echo Reading bootloader failed;
+ pause 'Press ANY key to reboot...'; reset; fi;
+ fi;
+ else echo SPI flash backup FAILED! Aborting ...;
+ pause 'Press ANY key to reboot...'; reset; fi
--
2.43.0
More information about the U-Boot
mailing list