[PATCH v2 03/10] pinctrl: rockchip: Update get_gpio_mux() ops

[Jonas Karlman]

Add a way to get_gpio_mux() based on the pinctrl pin offset, use -1 as
banknum to use the pinctrl pin offset mode instead of bank pin offset.

This mode will be used by the gpio driver to ensure a pin used by gpio
request() and get_function() ops always refer to the same pinctrl pin.

Also add verify_config() of banknum and index to avoid an out of range
access of the pin_banks array, i.e. with gpio6 on rk3066a.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v2: Collect r-b tag

The pin_to_mux() helper will also be used in the get_pin_muxing() ops
added in next patch to support the pinmux status cmd.
---
 .../pinctrl/rockchip/pinctrl-rockchip-core.c  | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
index 894ff74aee98..8ede74da40c9 100644
--- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
+++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
@@ -193,10 +193,30 @@ static struct rockchip_pin_bank *rockchip_pin_to_bank(struct udevice *dev,
 	return NULL;
 }
 
+static int rockchip_pin_to_mux(struct udevice *dev, unsigned int pin)
+{
+	struct rockchip_pin_bank *bank;
+
+	bank = rockchip_pin_to_bank(dev, pin);
+	if (!bank)
+		return -EINVAL;
+
+	return rockchip_get_mux(bank, pin - bank->pin_base);
+}
+
 static int rockchip_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
 					 int index)
-{	struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
+{
+	struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
 	struct rockchip_pin_ctrl *ctrl = priv->ctrl;
+	int ret;
+
+	if (banknum == -1)
+		return rockchip_pin_to_mux(dev, index);
+
+	ret = rockchip_verify_config(dev, banknum, index);
+	if (ret)
+		return ret;
 
 	return rockchip_get_mux(&ctrl->pin_banks[banknum], index);
 }
-- 
2.45.2