[PATCH 09/15] DONOTMERGE: arm64: dts: rockchip: enable the tsadc on the Qnap-TS433

[Heiko Stuebner]

Enable the tsadc node to allow for temperature measurements of the soc.

Tested-by: Uwe Kleine-König <ukleinek at debian.org>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-10-heiko@sntech.de

[this needs to be replaced, once the patch hits the devicetree-rebasing repo]

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index abeb00add42..34fc31ea9a3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -246,6 +246,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 /*
  * Connected to an MCU, that provides access to more LEDs,
  * buzzer, fan control and more.
-- 
2.39.2