[PATCH 5/8] net: dc2114x: remove unused lines and change the var and print types
Hanyuan Zhao
hanyuan-z at qq.com
Fri Aug 9 10:56:58 CEST 2024
This commit fixes a problem that even though the network card does not report
any issues in transmitting a setup frame, the driver prints the error status
every time. Let's set it for debug use.
Signed-off-by: Hanyuan Zhao <zhaohy22 at mails.tsinghua.edu.cn>
---
drivers/net/dc2114x.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c
index 0b3000cc1d..8a285742a1 100644
--- a/drivers/net/dc2114x.c
+++ b/drivers/net/dc2114x.c
@@ -311,7 +311,7 @@ static void send_setup_frame(struct dc2114x_priv *priv)
}
priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
- (u32)&setup_frame[0]));
+ (phys_addr_t)&setup_frame[0]));
priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_SET | SETUP_FRAME_LEN);
priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
@@ -326,7 +326,7 @@ static void send_setup_frame(struct dc2114x_priv *priv)
}
if (le32_to_cpu(priv->tx_ring[priv->tx_new].status) != 0x7FFFFFFF) {
- printf("TX error status2 = 0x%08X\n",
+ debug("TX error status2 = 0x%08X\n",
le32_to_cpu(priv->tx_ring[priv->tx_new].status));
}
@@ -355,7 +355,7 @@ static int dc21x4x_send_common(struct dc2114x_priv *priv, void *packet, int leng
flush_dcache_range((phys_addr_t)packet, (phys_addr_t)(packet + RX_BUFF_SZ));
priv->tx_ring[priv->tx_new].buf = cpu_to_le32(phys_to_bus(priv->devno,
- (u32)packet));
+ (phys_addr_t)packet));
priv->tx_ring[priv->tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length);
priv->tx_ring[priv->tx_new].status = cpu_to_le32(T_OWN);
@@ -426,7 +426,7 @@ static int dc21x4x_init_common(struct dc2114x_priv *priv)
priv->rx_ring[i].status = cpu_to_le32(R_OWN);
priv->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
priv->rx_ring[i].buf = cpu_to_le32(phys_to_bus(priv->devno,
- (u32)net_rx_packets[i]));
+ (phys_addr_t)net_rx_packets[i]));
priv->rx_ring[i].next = 0;
}
@@ -445,9 +445,9 @@ static int dc21x4x_init_common(struct dc2114x_priv *priv)
priv->tx_ring[priv->tx_ring_size - 1].des1 |= cpu_to_le32(TD_TER);
/* Tell the adapter where the TX/RX rings are located. */
- dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->rx_ring),
+ dc2114x_outl(priv, phys_to_bus(priv->devno, (phys_addr_t)priv->rx_ring),
DE4X5_RRBA);
- dc2114x_outl(priv, phys_to_bus(priv->devno, (u32)&priv->tx_ring),
+ dc2114x_outl(priv, phys_to_bus(priv->devno, (phys_addr_t)priv->tx_ring),
DE4X5_TRBA);
start_de4x5(priv);
@@ -493,7 +493,6 @@ static struct pci_device_id supported[] = {
static int dc2114x_start(struct udevice *dev)
{
- struct eth_pdata *plat = dev_get_plat(dev);
struct dc2114x_priv *priv = dev_get_priv(dev);
int rval;
--
2.39.2
More information about the U-Boot
mailing list