[PATCH v3 8/9] ubi: implement support for LED activity

[Christian Marangi]

On Wed, Aug 14, 2024 at 10:17:18AM +0200, Michael Nazzareno Trimarchi wrote:
> Hi all
> 
> On Wed, Aug 14, 2024 at 6:34 AM Heiko Schocher <hs at denx.de> wrote:
> >
> > Hello Christian,
> >
> > On 12.08.24 12:32, Christian Marangi wrote:
> > > Implement support for LED activity. If the feature is enabled,
> > > make the defined ACTIVITY LED to signal ubi write operation.
> > >
> > > Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
> > > ---
> > >   cmd/ubi.c | 17 +++++++++++++++--
> > >   1 file changed, 15 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/cmd/ubi.c b/cmd/ubi.c
> > > index 0e62e449327..6f679eae9c3 100644
> > > --- a/cmd/ubi.c
> > > +++ b/cmd/ubi.c
> > > @@ -14,6 +14,7 @@
> > >   #include <command.h>
> > >   #include <env.h>
> > >   #include <exports.h>
> > > +#include <led.h>
> > >   #include <malloc.h>
> > >   #include <memalign.h>
> > >   #include <mtd.h>
> > > @@ -488,10 +489,22 @@ exit:
> > >
> > >   int ubi_volume_write(char *volume, void *buf, loff_t offset, size_t size)
> > >   {
> > > +     int ret;
> > > +
> > > +#ifdef CONFIG_LED_ACTIVITY_ENABLE
> > > +     led_activity_blink();
> > > +#endif
> >
> > Do we really need ifdef? May it is possible to declare an empty function
> > when CONFIG_LED_ACTIVITY_ENABLE is not set? May this applies for the whole
> > series?
> >
> > > +
> > >       if (!offset)
> > > -             return ubi_volume_begin_write(volume, buf, size, size);
> > > +             ret = ubi_volume_begin_write(volume, buf, size, size);
> > > +     else
> > > +             ret = ubi_volume_offset_write(volume, buf, offset, size);
> > >
> > > -     return ubi_volume_offset_write(volume, buf, offset, size);
> > > +#ifdef CONFIG_LED_ACTIVITY_ENABLE
> > > +     led_activity_off();
> > > +#endif
> > > +
> > > +     return ret;
> > >   }
> > >
> > >   int ubi_volume_read(char *volume, char *buf, loff_t offset, size_t size)
> > >
> >
> I rather prefer to have some registration of events that need to be executed for
> a particular i/o activity and then a subscription process from led
> subsystem if that
> particular event is connected to the dts or just on a board file
>

My concern is that it might become too complex just for the sake of
putting a LED intro a state. Do we have other case where such event
subsystem might be useful?

Uboot is not really multi thread so we don't expect that much thing to
happen at the same time. Do we have case where an i/o might happen in
multiple place? Example transfering data and writing them at the same
time? The common practice is to first transfer and then handle.

> 
> 
> > bye,
> > Heiko
> > --
> > DENX Software Engineering GmbH,      Managing Director: Erika Unter
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
> 
> 
> 
> -- 
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael at amarulasolutions.com
> __________________________________
> 
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info at amarulasolutions.com
> www.amarulasolutions.com

-- 
	Ansuel