[Binman] Question regarding SPL symbol offsets generation

[Lukasz Majewski]

Hi Simon,

> Hi,
> 
> On Tue, 27 Aug 2024 at 12:47, Fabio Estevam <festevam at gmail.com>
> wrote:
> >
> > Hi Lukasz,
> >
> > On Thu, Aug 15, 2024 at 5:14 PM Lukasz Majewski <lukma at denx.de>
> > wrote: 
> > > Unfortunately not - this change is only for properly setting start
> > > address of the u-boot.
> > >
> > > The _real_ problem here is the symbol placement generated by
> > > binman when we try to define the image as a single one.
> > >
> > > Moreover, this change follows other boards with imx8mm processor -
> > > ./configs/imx8mm_beacon_fspi_defconfig to be specific.
> > >
> > > The "fix" (for which I'd been now probably opt) for this issue
> > > would be to generate two images with binman - one for
> > > u-boot-spl-ddr.bin and the final flash.bin with the former one
> > > included (as it was before SHA1:
> > > 37e50627efacd8dae18b564e9d8886a033e181bc)  
> >
> > Is QSPI boot broken on i.MX8MM?
> >
> > I am adding Adam and Mamta who have tested QSPI booting on
> > imx8mm_beacon and imx8mm_evk, respectively.  
> 
> Note also that I sent a series[1] which allows the symbols-base to be
> adjusted, if that helps.

I've seen them - but not yet tested.

Thanks Simon for the patch series.

> 
> Regards,
> Simon
> 
> [1] https://patchwork.ozlabs.org/project/uboot/list/?series=421010




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20240828/bc5f6917/attachment.sig>