[PATCH] configs: verdin-imx8m[mp]: set CONFIG_SPL_LOAD_FIT_ADDRESS

[Hiago De Franco]

From: Rogerio Guerra Borin <rogerio.borin at toradex.com>

Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and
verdin-imx8mp configurations to specify the load address for FIT images
loaded by the SPL.

As per lastest instructions from NXP, the generation of a HABv4 CSF
(Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load
address to be set to a fixed value when binman is used. The address is
defined by CONFIG_SPL_LOAD_FIT_ADDRESS.

Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the
start of the DDR memory leaving plenty of room for the various DDR-
residing artifacts to be moved to their usual load addresses which are
close to the start of the DDR.

Signed-off-by: Rogerio Guerra Borin <rogerio.borin at toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco at toradex.com>
---
 configs/verdin-imx8mm_defconfig | 1 +
 configs/verdin-imx8mp_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index ef7f3b1bc10d..a6f92f3d070e 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -29,6 +29,7 @@ CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_OF_SYSTEM_SETUP=y
diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index fca91f7b1eee..594fea3a1b03 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -38,6 +38,7 @@ CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=1
 CONFIG_OF_SYSTEM_SETUP=y
-- 
2.39.2